Request 5604 (accepted)

Overview

Request 5604 (accepted)

Versionbump

Created by zaitor about 2 years ago
In state accepted
Package maintainer: zaitor

Submit pipewire-aptx

Submit package home:zaitor:...s:Essentials / pipewire-aptx to package Essentials / pipewire-aptx

pipewire-aptx.changes Changed

pipewire-aptx.spec Changed

pipewire-0.3.56.tar.gz/.cirrus.yml -> pipewire-0.3.57.tar.gz/.cirrus.yml Changed

pipewire-0.3.56.tar.gz/NEWS -> pipewire-0.3.57.tar.gz/NEWS Changed

@@ -1,3 +1,93 @@
+# PipeWire 0.3.57 (2022-09-02)
+
+This is a bugfix release that is API and ABI compatible with previous
+0.3.x releases.
+
+## Highlights
+
+## PipeWire
+  - Support masking of conf.d/ files. (#2629)
+  - Add some more debug info to memfd.
+  - Improve data-loop invoke method. Also flush pending items. (#2631)
+  - Add a filter-chain systemd service file than can be used to start
+    custom filters placed in ~/.conf/pipewire/filter-chain.d/ (#2553)
+  - Improve triggered timestamps for remote nodes.
+  - Fix some potential cross compilation problems due to wrong
+    host_machine.
+  - Check return values of pw_getrandom().
+
+
+## Tools
+  - Updates to pw-cli manpages. (#2552)
+  - Remove the pw-cli dump command. It is mostly implemented as part of
+    wpctl status, pw-dump, pw-link, pw-top and others.
+  - Clean up resource in pw-cat correctly on errors. (#2651)
+
+## Modules
+  - Fix compilation of AVB on big-endian. Enable AVB only on Linux.
+  - Use org.freedesktop.portal.Realtime when available. This does the
+    correct PID/TID mappings to make realtime also work from flatpaks.
+  - Fix compilation of ROC module when headers are missing. (#2513)
+  - Improve some error cleanup paths in protocol-native. Improve connect
+    and disconnect.
+  - Fix a potential crash in FFT unload in filter-chain.
+  - Implement PIPEWIRE_NOTIFICATION_FD for notification when the socket
+    is ready.
+  - Try to use rtkit if set_nice() fails.
+  - Fix rate adjustement logic in pulse-tunnel. This would cause
+    increasing delays and hickups when using tunnels. (#2548)
+  - Handle disconnect in pulse-tunnel.
+
+## Bluetooth
+  - Add OPUS as a new vendor codec. Add OPUS-A2DP spec. PipeWire can now
+    send and reveive OPUS data over bluetooth.
+  - An AAC decoder was added so that PipeWire can now also function as
+    an A2DP AAC receiver.
+
+## SPA
+  - Tweak the resampler window function some more. (#2574)
+  - Improve format convert performance in some fallback cases.
+  - Fix rounding in format conversion on ARM NEON.
+  - Fix libcamera build error. (#2575)
+  - Fix some issues where the wrong samplerate was used. (#2614)
+  - Don't wait for more samples that can fit in the ringbuffer in ALSA.
+  - Improve buffer size handling in audioconvert, scale the buffers based
+    on the rate conversion and make things work with really large rate
+    conversions as well.
+  - Add more and better debug for ALSA devices.
+  - Improve channel mix: Filter FC and LFE when copying from a different
+    layout. Implement STEREO from FC. Avoid generating REAR from FC in PSD
+    mode.
+  - Fix rate match for sources. This fixes an error where follower sources
+    would generate many resync warnings.
+  - Improve ALSA format negotiation. If the ALSA node is not running and
+    there was a previously configured format, close and reopen the device
+    to enumerate and accept all possible formats again. (#2625).
+
+## ALSA
+  - The alsa plugin will now also save the volumes set with the control
+    API. This saves the volumes set with alsa-mixer, for example.
+
+## Pulse-server
+  - Flatpak apps with devices=all (Zoom) will now be granted Manager
+    permissions.
+  - Small tweaks to the amount of data sent to clients to work around an
+    issue in freerdp.
+
+## JACK
+  - Clean up the transport correctly when closing a client. (#2569)
+  - Match context properties in addition to node properties for the jack
+    client rules. (#2580)
+  - Make sure to return an error when disconnected from the server. (#2606)
+  - Fix thread cast problem in jack_client_thread_id().
+  - Increase jack_client_name_size() length and make sure we have space for
+    the \0 byte.
+  - JACK clients from the same application will be added to the same group
+    so that they share the quantum and rate.
+
+
+Older versions:
+
 # PipeWire 0.3.56 (2022-07-19)
 
 This is a quick bugfix release that is API and ABI compatible with previous
@@ -52,8 +142,6 @@
   - Add the resampler delay to delay reporting as well.
 
 
-Older versions:
-
 # PipeWire 0.3.55 (2022-07-12)
 
 This is a quick bugfix release that is API and ABI compatible with previous

pipewire-0.3.56.tar.gz/doc/tutorial3.c -> pipewire-0.3.57.tar.gz/doc/tutorial3.c Changed

@@ -7,32 +7,36 @@
 #include <pipewire/pipewire.h>
 
 /* roundtrip */
-static int roundtrip(struct pw_core *core, struct pw_main_loop *loop)
+struct roundtrip_data {
+	int pending;
+	struct pw_main_loop *loop;
+};
+
+static void on_core_done(void *data, uint32_t id, int seq)
+{
+	struct roundtrip_data *d = data;
+
+	if (id == PW_ID_CORE && seq == d->pending)
+		pw_main_loop_quit(d->loop);
+}
+
+static void roundtrip(struct pw_core *core, struct pw_main_loop *loop)
 {
-        struct spa_hook core_listener;
-        int pending, done = 0;
-        void core_event_done(void *object, uint32_t id, int seq) {
-                if (id == PW_ID_CORE && seq == pending) {
-                        done = 1;
-                        pw_main_loop_quit(loop);
-                }
-        }
-        const struct pw_core_events core_events = {
-                PW_VERSION_CORE_EVENTS,
-                .done = core_event_done,
-        };
-
-        spa_zero(core_listener);
-        pw_core_add_listener(core, &core_listener,
-                                 &core_events, NULL);
-
-        pending = pw_core_sync(core, PW_ID_CORE, 0);
-
-        while (!done) {
-                pw_main_loop_run(loop);
-        }
-        spa_hook_remove(&core_listener);
-        return 0;
+	static const struct pw_core_events core_events = {
+		PW_VERSION_CORE_EVENTS,
+		.done = on_core_done,
+	};
+
+	struct roundtrip_data d = { .loop = loop };
+	struct spa_hook core_listener;
+
+	pw_core_add_listener(core, &core_listener, &core_events, &d);
+
+	d.pending = pw_core_sync(core, PW_ID_CORE, 0);
+
+	pw_main_loop_run(loop);
+
+	spa_hook_remove(&core_listener);
 }
 /* roundtrip */
 
@@ -50,37 +54,36 @@
 
 int main(int argc, char *argv)
 {
-        struct pw_main_loop *loop;
-        struct pw_context *context;
-        struct pw_core *core;
-        struct pw_registry *registry;
-        struct spa_hook registry_listener;
+	struct pw_main_loop *loop;
+	struct pw_context *context;
+	struct pw_core *core;
+	struct pw_registry *registry;
+	struct spa_hook registry_listener;
 
-        pw_init(&argc, &argv);
+	pw_init(&argc, &argv);
 
-        loop = pw_main_loop_new(NULL /* properties */);
-        context = pw_context_new(pw_main_loop_get_loop(loop),
-                        NULL /* properties */,
-                        0 /* user_data size */);
+	loop = pw_main_loop_new(NULL /* properties */);
+	context = pw_context_new(pw_main_loop_get_loop(loop),
+			NULL /* properties */,
+			0 /* user_data size */);
 
-        core = pw_context_connect(context,
-                        NULL /* properties */,
-                        0 /* user_data size */);
+	core = pw_context_connect(context,
+			NULL /* properties */,
+			0 /* user_data size */);
 
-        registry = pw_core_get_registry(core, PW_VERSION_REGISTRY,
-                        0 /* user_data size */);
+	registry = pw_core_get_registry(core, PW_VERSION_REGISTRY,
+			0 /* user_data size */);
 
-        spa_zero(registry_listener);
-        pw_registry_add_listener(registry, &registry_listener,
-                                       &registry_events, NULL);
+	pw_registry_add_listener(registry, &registry_listener,
+				       &registry_events, NULL);
 
-        roundtrip(core, loop);
+	roundtrip(core, loop);
 
-        pw_proxy_destroy((struct pw_proxy*)registry);
-        pw_core_disconnect(core);
-        pw_context_destroy(context);
-        pw_main_loop_destroy(loop);
+	pw_proxy_destroy((struct pw_proxy*)registry);
+	pw_core_disconnect(core);
+	pw_context_destroy(context);
+	pw_main_loop_destroy(loop);
 
-        return 0;
+	return 0;
 }
 /* code */

pipewire-0.3.56.tar.gz/doc/tutorial3.dox -> pipewire-0.3.57.tar.gz/doc/tutorial3.dox Changed

@@ -15,10 +15,9 @@
 Let's take a look at what this method does.
 
 \code{.c}
-        struct spa_hook core_listener;
-        spa_zero(core_listener);
-        pw_core_add_listener(core, &core_listener,
-			&core_events, NULL);
+	struct spa_hook core_listener;
+
+	pw_core_add_listener(core, &core_listener, &core_events, &d);
 \endcode
 
 First of all we add a listener for the events of the core
@@ -26,37 +25,31 @@
 tutorial. This is the event handler:
 
 \code{.c}
-        int pending, done = 0;
-
-        void core_event_done(void *data, uint32_t id, int seq) {
-                if (id == PW_ID_CORE && seq == pending) {
-                        done = 1;
-                        pw_main_loop_quit(loop);
-                }
-        }
-        const struct pw_core_events core_events = {
-                PW_VERSION_CORE_EVENTS,
-                .done = core_event_done,
-        };
+static void on_core_done(void *data, uint32_t id, int seq)
+{
+	struct roundtrip_data *d = data;
+
+	if (id == PW_ID_CORE && seq == d->pending)
+		pw_main_loop_quit(d->loop);
+}
 \endcode
 
-When the done event is received for an object with id `PW_ID_CORE`
-and a certain sequence number `seq`, this function will set the done
-variable to 1 and call `pw_main_loop_quit()`.
+When the done event is received for an object with id `PW_ID_CORE` and
+a certain sequence number `seq`, this function will call `pw_main_loop_quit()`.
 
 Next we do:
 
 \code{.c}
-        pending = pw_core_sync(core, PW_ID_CORE, 0);
+	d.pending = pw_core_sync(core, PW_ID_CORE, 0);
 \endcode
 
 This triggers the `sync` method on the core object with id
 `PW_ID_CORE` and sequence number 0.
 
 Because this is a method on a proxy object, it will be executed
-asynchronously and the returns value will reflect this. PipeWire
+asynchronously and the return value will reflect this. PipeWire
 uses the return values of the underlying SPA (Simple Plugin API)
-helper objects (See also error codes(spa-design.md#error-codes)).
+helper objects (See also \ref page_spa_design ).
 
 Because all messages on the PipeWire server are handled sequentially,
 the sync method will be executed after all previous methods are
@@ -68,9 +61,7 @@
 receive the events:
 
 \code{.c}
-        while (!done) {
-                pw_main_loop_run(loop);
-        }
+	pw_main_loop_run(loop);
 \endcode
 
 When we get the done event, we can compare it to the sync method
@@ -79,7 +70,7 @@
 remove the listener:
 
 \code{.c}
-        spa_hook_remove(&core_listener);
+	spa_hook_remove(&core_listener);
 \endcode
 
 If we add this roundtrip method to our code and call it instead of the
@@ -100,7 +91,7 @@
 created them:
 
 \code{.c}
-        pw_proxy_destroy((struct pw_proxy*)registry);
+	pw_proxy_destroy((struct pw_proxy*)registry);
 \endcode
 
 The registry is a proxy and can be destroyed with the generic proxy destroy
@@ -110,7 +101,7 @@
 We can disconnect from the server with:
 
 \code{.c}
-        pw_core_disconnect(core);
+	pw_core_disconnect(core);
 \endcode
 
 This will also destroy the core proxy object and will remove the proxies
@@ -119,8 +110,8 @@
 We can finally destroy our context and mainloop to conclude this tutorial:
 
 \code{.c}
-        pw_context_destroy(context);
-        pw_main_loop_destroy(loop);
+	pw_context_destroy(context);
+	pw_main_loop_destroy(loop);
 \endcode
 
 \ref page_tutorial2 | \ref page_tutorial "Index" | \ref page_tutorial4

pipewire-0.3.56.tar.gz/man/pw-cli.1.rst.in -> pipewire-0.3.57.tar.gz/man/pw-cli.1.rst.in Changed

@@ -34,17 +34,20 @@
 GENERAL COMMANDS
 ================
 
-help
-  Show a quick help on the commands available.
+help | h
+  Show a quick help on the commands available. It also lists the aliases
+  for many commands.
 
-quit
+quit | q
   Exit from **pw-cli**
 
 MODULE MANAGEMENT
 =================
 
-| Modules are loaded and unloaded in the local instance and can add
-| functionality or objects to the local instance.
+| Modules are loaded and unloaded in the local instance, thus the pw-cli
+| binary itself and can add functionality or objects to the local
+| instance. It is not possible in PipeWire to load modules in another
+| instance.
 
 load-module *name* *arguments...*
   Load a module specified by its name and arguments. For most
@@ -105,14 +108,22 @@
 
   This command returns a *node variable*.
 
-destroy-node *node-var*
-  Destroy a node.
-
 export-node *node-id* *remote-var*
   Export a node from the local instance to the specified instance.
   When no instance is specified, the node will be exported to the current
   instance.
 
+DEVICE MANAGEMENT
+=================
+
+create-device *factory-name* *properties...*
+  Create a device from a factory in the current instance.
+
+  Properties are key=value pairs separated by whitespace.
+
+  This command returns a *device variable*.
+
+
 LINK MANAGEMENT
 ===============
 
@@ -125,8 +136,44 @@
 
   This command returns a *link variable*.
 
-destroy-link *link-var*
-  Destroy a link.
+GLOBALS MANAGEMENT
+==================
+
+destroy *object-id*
+  Destroy a global object.
+
+
+PARAMETER MANAGEMENT
+====================
+
+enum-params *object-id* *param-id*
+  Enumerate params of an object.
+
+  *param-id* can also be given as the param short name.
+
+set-param *object-id* *param-id* *param-json*
+  Set param of an object.
+
+  *param-id* can also be given as the param short name.
+
+PERMISSION MANAGEMENT
+=====================
+
+permissions *client-id* *object-id* *permission*
+  Set permissions for a client.
+
+  *object-id* can be *-1* to set the default permissions.
+
+get-permissions *client-id*
+  Get permissions of a client.
+
+
+COMMAND MANAGEMENT
+==================
+
+send-command *object-id*
+  Send a command to an object.
+
 
 EXAMPLES
 ========

pipewire-0.3.56.tar.gz/meson.build -> pipewire-0.3.57.tar.gz/meson.build Changed

@@ -1,5 +1,5 @@
 project('pipewire', 'c' ,
-  version : '0.3.56',
+  version : '0.3.57',
   license :  'MIT', 'LGPL-2.1-or-later', 'GPL-2.0-only' ,
   meson_version : '>= 0.59.0',
   default_options :  'warning_level=3',
@@ -295,6 +295,11 @@
 cap_lib = dependency('libcap', required : false)
 cdata.set('HAVE_LIBCAP', cap_lib.found())
 
+glib2_dep = dependency('glib-2.0', required : get_option('flatpak'))
+summary({'GLib-2.0 (Flatpak support)': glib2_dep.found()}, bool_yn: true, section: 'Misc dependencies')
+flatpak_support = glib2_dep.found()
+cdata.set('HAVE_GLIB2', flatpak_support)
+
 gst_option = get_option('gstreamer')
 gst_deps_def = {
   'glib-2.0': {'version': '>=2.32.0'},
@@ -337,11 +342,11 @@
 cdata.set('HAVE_WEBRTC', webrtc_dep.found())
 
 # On FreeBSD and MidnightBSD, epoll-shim library is required for eventfd() and timerfd()
-epoll_shim_dep = (build_machine.system() == 'freebsd' or build_machine.system() == 'midnightbsd'
+epoll_shim_dep = (host_machine.system() == 'freebsd' or host_machine.system() == 'midnightbsd'
     ? dependency('epoll-shim', required: true)
     : dependency('', required: false))
 
-libinotify_dep = (build_machine.system() == 'freebsd' or build_machine.system() == 'midnightbsd'
+libinotify_dep = (host_machine.system() == 'freebsd' or host_machine.system() == 'midnightbsd'
     ? dependency('libinotify', required: true)
     : dependency('', required: false))
 
@@ -356,7 +361,7 @@
 alsa_dep = dependency('alsa', version : '>=1.1.7', required: need_alsa)
 summary({'pipewire-alsa': alsa_dep.found()}, bool_yn: true)
 
-if build_machine.system() == 'freebsd' or build_machine.system() == 'midnightbsd'
+if host_machine.system() == 'freebsd' or host_machine.system() == 'midnightbsd'
 # On FreeBSD and MidnightBSD the OpenSSL library may come from base or a package.
 # Check for a package first and fallback to the base library if we can't find it via pkgconfig
     openssl_lib = dependency('openssl', required: false)

pipewire-0.3.56.tar.gz/meson_options.txt -> pipewire-0.3.57.tar.gz/meson_options.txt Changed

pipewire-0.3.56.tar.gz/pipewire-alsa/alsa-plugins/ctl_pipewire.c -> pipewire-0.3.57.tar.gz/pipewire-alsa/alsa-plugins/ctl_pipewire.c Changed

pipewire-0.3.56.tar.gz/pipewire-jack/src/pipewire-jack.c -> pipewire-0.3.57.tar.gz/pipewire-jack/src/pipewire-jack.c Changed

@@ -62,7 +62,7 @@
 
 #define DEFAULT_RT_MAX	88
 
-#define JACK_CLIENT_NAME_SIZE		128
+#define JACK_CLIENT_NAME_SIZE		256
 #define JACK_PORT_NAME_SIZE		256
 #define JACK_PORT_TYPE_SIZE             32
 #define MONITOR_EXT			" Monitor"
@@ -800,7 +800,7 @@
 	} else {						\
 		if (c->active)					\
 			(expr);					\
-		pw_log_debug("skip " #callback 			\
+		pw_log_debug("skip " #callback			\
 			" cb:%p active:%d", c->callback,	\
 			c->active);				\
 	}							\
@@ -817,6 +817,9 @@
 			res = c->callback(__VA_ARGS__);		\
 			c->rt_locked = false;			\
 			pthread_mutex_unlock(&c->rt_lock);	\
+		} else {					\
+			pw_log_debug("skip " #callback		\
+				" cb:%p", c->callback);		\
 		}						\
 	}							\
 	res;							\
@@ -871,6 +874,8 @@
 		pw_log_warn("sync requested from callback");
 		return 0;
 	}
+	if (client->last_res == -EPIPE)
+		return -EPIPE;
 
 	client->last_res = 0;
 	client->pending_sync = pw_proxy_sync((struct pw_proxy*)client->core, client->pending_sync);
@@ -3279,7 +3284,7 @@
 			"jack.properties", client->props);
 
 	pw_context_conf_section_match_rules(client->context.context, "jack.rules",
-			&client->props->dict, execute_match, client);
+			&client->context.context->properties->dict, execute_match, client);
 
 	support = pw_context_get_support(client->context.context, &n_support);
 
@@ -3356,6 +3361,8 @@
 	}
 	if (pw_properties_get(client->props, PW_KEY_NODE_NAME) == NULL)
 		pw_properties_set(client->props, PW_KEY_NODE_NAME, client_name);
+	if (pw_properties_get(client->props, PW_KEY_NODE_GROUP) == NULL)
+		pw_properties_setf(client->props, PW_KEY_NODE_GROUP, "jack-%d", getpid());
 	if (pw_properties_get(client->props, PW_KEY_NODE_DESCRIPTION) == NULL)
 		pw_properties_set(client->props, PW_KEY_NODE_DESCRIPTION, client_name);
 	if (pw_properties_get(client->props, PW_KEY_MEDIA_TYPE) == NULL)
@@ -3492,6 +3499,8 @@
 
 	res = jack_deactivate(client);
 
+	clean_transport(c);
+
 	if (c->context.loop)
 		pw_thread_loop_stop(c->context.loop);
 
@@ -3577,8 +3586,9 @@
 SPA_EXPORT
 int jack_client_name_size (void)
 {
-	pw_log_trace("%d", JACK_CLIENT_NAME_SIZE);
-	return JACK_CLIENT_NAME_SIZE;
+	/* The JACK API specifies that this value includes the final NULL character. */
+	pw_log_trace("%d", JACK_CLIENT_NAME_SIZE+1);
+	return JACK_CLIENT_NAME_SIZE+1;
 }
 
 SPA_EXPORT
@@ -3765,12 +3775,12 @@
 	struct client *c = (struct client *) client;
 	void *thr;
 
-	spa_return_val_if_fail(c != NULL, -EINVAL);
+	spa_return_val_if_fail(c != NULL, (pthread_t){0});
 
 	thr = pw_data_loop_get_thread(c->loop);
 	if (thr == NULL)
 		return pthread_self();
-	return *(pthread_t*)thr;
+	return (pthread_t) thr;
 }
 
 SPA_EXPORT

pipewire-0.3.56.tar.gz/po/LINGUAS -> pipewire-0.3.57.tar.gz/po/LINGUAS Changed

pipewire-0.3.56.tar.gz/po/ca.po -> pipewire-0.3.57.tar.gz/po/ca.po Changed

@@ -5,6 +5,7 @@
 # Xavier Conde Rueda <xavi.conde@gmail.com>, 2008.
 # Agustí Grau <fletxa@gmail.com>, 2009.
 # Judith Pintó Subirada <judithp@gmail.com>
+# Jordi Mas i Herǹandez, <jmas@softcatala.org>, 2022
 #
 # This file is translated according to the glossary and style guide of
 # Softcatalà. If you plan to modify this file, please read first the page
@@ -26,11 +27,10 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: pipewire\n"
-"Report-Msgid-Bugs-To: https://gitlab.freedesktop.org/pipewire/pipewire/"
-"issues/new\n"
+"Report-Msgid-Bugs-To: https://gitlab.freedesktop.org/pipewire/pipewire/issues/new\n"
 "POT-Creation-Date: 2021-04-18 16:54+0800\n"
-"PO-Revision-Date: 2012-01-30 09:52+0000\n"
-"Last-Translator: Josep Torné Llavall <josep.torne@gmail.com>\n"
+"PO-Revision-Date: 2022-09-01 19:24+0000\n"
+"Last-Translator: Jordi Mas i Herǹandez, <jmas@softcatala.org>,\n"
 "Language-Team: Catalan <fedora@softcatala.net>\n"
 "Language: ca\n"
 "MIME-Version: 1.0\n"
@@ -45,14 +45,18 @@
 "      --version                         Show version\n"
 "  -c, --config                          Load config (Default %s)\n"
 msgstr ""
+"%s opcions\n"
+"  -h, --help                            Mostra aquesta ajuda\n"
+"      --version                         Mostra la versió\n"
+"  -c, --config                          Carrega la configuració (predeterminada %s)\n"
 
 #: src/daemon/pipewire.desktop.in:4
 msgid "PipeWire Media System"
-msgstr ""
+msgstr "Sistema multimèdia PipeWire"
 
 #: src/daemon/pipewire.desktop.in:5
 msgid "Start the PipeWire Media System"
-msgstr ""
+msgstr "Inicia el sistema multimèdia PipeWire"
 
 #: src/examples/media-session/alsa-monitor.c:526
 #: spa/plugins/alsa/acp/compat.c:187
@@ -66,7 +70,7 @@
 
 #: src/examples/media-session/alsa-monitor.c:539
 msgid "Unknown device"
-msgstr ""
+msgstr "Dispositiu desconegut"
 
 #: src/tools/pw-cat.c:991
 #, c-format
@@ -77,9 +81,13 @@
 "  -v, --verbose                         Enable verbose operations\n"
 "\n"
 msgstr ""
+"%s opcions <fitxer>\n"
+"  -h, --help                            Mostra aquesta ajuda\n"
+"      --version                         Mostra la versió\n"
+"  -v, --verbose                         Habilita les operacions detallades\n"
 
 #: src/tools/pw-cat.c:998
-#, c-format
+#, c-format, fuzzy
 msgid ""
 "  -R, --remote                          Remote daemon name\n"
 "      --media-type                      Set media type (default %s)\n"
@@ -90,42 +98,58 @@
 "      --latency                         Set node latency (default %s)\n"
 "                                          Xunit (unit = s, ms, us, ns)\n"
 "                                          or direct samples (256)\n"
-"                                          the rate is the one of the source "
-"file\n"
+"                                          the rate is the one of the source file\n"
 "      --list-targets                    List available targets for --target\n"
 "\n"
 msgstr ""
+"-R, --remote Nom del dimoni remot\n"
+"      --media-type Estableix el tipus de mitjà (per defecte %s)\n"
+"      --media-category Estableix la categoria dels mitjans (per defecte %s)\n"
+"      --media-role Estableix el rol del mitjà (per defecte %s)\n"
+"      --target Estableix l'objectiu del node (per defecte %s)\n"
+"                                          0 vol dir que no enllaça\n"
+"      --latency Estableix latència del node (per defecte %s)\n"
+"                                          Xunit (unitat = s, ms, us, ns)\n"
+"                                          o mostres directes (256)\n"
+"                                          la taxa és la del fitxer d'origen\n"
+"      --list-targets Llista d'objectius disponibles per a --target"
 
 #: src/tools/pw-cat.c:1016
-#, c-format
+#, c-format, fuzzy
 msgid ""
-"      --rate                            Sample rate (req. for rec) (default "
-"%u)\n"
-"      --channels                        Number of channels (req. for rec) "
-"(default %u)\n"
+"      --rate                            Sample rate (req. for rec) (default %u)\n"
+"      --channels                        Number of channels (req. for rec) (default %u)\n"
 "      --channel-map                     Channel map\n"
-"                                            one of: \"stereo\", "
-"\"surround-51\",... or\n"
-"                                            comma separated list of channel "
-"names: eg. \"FL,FR\"\n"
-"      --format                          Sample format %s (req. for rec) "
-"(default %s)\n"
+"                                            one of: \"stereo\", \"surround-51\",... or\n"
+"                                            comma separated list of channel names: eg. \"FL,FR\"\n"
+"      --format                          Sample format %s (req. for rec) (default %s)\n"
 "      --volume                          Stream volume 0-1.0 (default %.3f)\n"
-"  -q  --quality                         Resampler quality (0 - 15) (default "
-"%d)\n"
+"  -q  --quality                         Resampler quality (0 - 15) (default %d)\n"
 "\n"
 msgstr ""
+"--rate Freqüència de mostreig (req. per rec) (predeterminat %u)\n"
+"      --channels Nombre de canals (req. per rec) (predeterminat %u)\n"
+"      --channel-map Mapa de canals\n"
+"                                            un dels següents: \"estèreo\", \"surround-51\",... o\n"
+"                                            Llista separada per comes dels noms dels canals: per exemple. \"FL,FR\"\n"
+"      --format Format de mostra %s (req. per a rec) (predeterminat %s)\n"
+"      --volume Volum de flux 0-1.0 (predeterminat %.3f)\n"
+"  -q --qualitat Remostrador de qualitat (0 - 15) (per defecte %d)"
 
 #: src/tools/pw-cat.c:1033
+#, fuzzy
 msgid ""
 "  -p, --playback                        Playback mode\n"
 "  -r, --record                          Recording mode\n"
 "  -m, --midi                            Midi mode\n"
 "\n"
 msgstr ""
+"-p, --playback Mode de reproducció\n"
+"  -r, --record mode d'enregistrament\n"
+"  -m, --midi Mode MIDI"
 
 #: src/tools/pw-cli.c:2932
-#, c-format
+#, c-format, fuzzy
 msgid ""
 "%s options command\n"
 "  -h, --help                            Show this help\n"
@@ -134,10 +158,15 @@
 "  -r, --remote                          Remote daemon name\n"
 "\n"
 msgstr ""
+"%s opcions ordre\n"
+"  -h, --help Mostra aquesta ajuda\n"
+"      --version Mostra la versió\n"
+"  -d, --daemon Inicia com a dimoni (fals predeterminat)\n"
+"  -r, --remote Nom del dimoni remot"
 
 #: spa/plugins/alsa/acp/acp.c:290
 msgid "Pro Audio"
-msgstr ""
+msgstr "Pro Audio"
 
 #: spa/plugins/alsa/acp/acp.c:411 spa/plugins/alsa/acp/alsa-mixer.c:4704
 #: spa/plugins/bluez5/bluez5-device.c:1000
@@ -252,25 +281,23 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2801
 msgid "Dock Microphone"
-msgstr ""
+msgstr "Micròfon de l'acoblador"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2803
 msgid "Headset Microphone"
-msgstr ""
+msgstr "Micròfon d'auriculars"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2807
 msgid "Analog Output"
 msgstr "Sortida analògica"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2809
-#, fuzzy
 msgid "Headphones 2"
-msgstr "Auriculars"
+msgstr "Auriculars 2"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2810
-#, fuzzy
 msgid "Headphones Mono Output"
-msgstr "Sortida mono analògica"
+msgstr "Sortida mono dels auriculars"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2811
 msgid "Line Out"
@@ -297,49 +324,41 @@
 msgstr "Entrada digital (S/PDIF)"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2817
-#, fuzzy
 msgid "Multichannel Input"
-msgstr "Multicanal"
+msgstr "Entrada multicanal"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2818
-#, fuzzy
 msgid "Multichannel Output"
-msgstr "Multicanal"
+msgstr "Sortida multicanal"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2819
-#, fuzzy
 msgid "Game Output"
-msgstr "Sortida %s"
+msgstr "Sortida del joc"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2820
 #: spa/plugins/alsa/acp/alsa-mixer.c:2821
-#, fuzzy
 msgid "Chat Output"
-msgstr "Sortida %s"
+msgstr "Sortida del xat"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2822
-#, fuzzy
 msgid "Chat Input"
-msgstr "Entrada %s"
+msgstr "Entrada del xat"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2823
-#, fuzzy
 msgid "Virtual Surround 7.1"
-msgstr "Envoltant analògic 7.1"
+msgstr "Envoltant virtual 7.1"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4527
 msgid "Analog Mono"
 msgstr "Mono analògic"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4528
-#, fuzzy
 msgid "Analog Mono (Left)"
-msgstr "Mono analògic"
+msgstr "Mono analògic (esquerra)"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4529
-#, fuzzy
 msgid "Analog Mono (Right)"
-msgstr "Mono analògic"
+msgstr "Mono analògic (dreta)"
 
 #. Note: Not translated to "Analog Stereo Input", because the source
 #. * name gets "Input" appended to it automatically, so adding "Input"
@@ -364,13 +383,12 @@
 #: spa/plugins/alsa/acp/alsa-mixer.c:4698
 #: spa/plugins/bluez5/bluez5-device.c:1135
 msgid "Headset"
-msgstr "Auricular"
+msgstr "Auriculars"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4541
 #: spa/plugins/alsa/acp/alsa-mixer.c:4699
-#, fuzzy
 msgid "Speakerphone"
-msgstr "Altaveu"
+msgstr "Altaveu del telèfon"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4542
 #: spa/plugins/alsa/acp/alsa-mixer.c:4543
@@ -379,23 +397,23 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4544
 msgid "Analog Surround 2.1"
-msgstr "So envoltant analògic 2.1"
+msgstr "Envoltant analògic 2.1"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4545
 msgid "Analog Surround 3.0"
-msgstr "So envoltant analògic 3.0"
+msgstr "Envoltant analògic 3.0"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4546
 msgid "Analog Surround 3.1"
-msgstr "So envoltant analògic 4.1"
+msgstr "Envoltant analògic 3.1"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4547
 msgid "Analog Surround 4.0"
-msgstr "Envoltant analògic 4.0 "
+msgstr "Envoltant analògic 4.0"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4548
 msgid "Analog Surround 4.1"
-msgstr "Envoltant analògic 4.1 "
+msgstr "Envoltant analògic 4.1"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4549
 msgid "Analog Surround 5.0"
@@ -407,15 +425,15 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4551
 msgid "Analog Surround 6.0"
-msgstr "So envoltant analògic 6.0"
+msgstr "Envoltant analògic 6.0"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4552
 msgid "Analog Surround 6.1"
-msgstr "So envoltant analògic 6.1"
+msgstr "Envoltant analògic 6.1"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4553
 msgid "Analog Surround 7.0"
-msgstr "So envoltant analògic 7.0"
+msgstr "Envoltant analògic 7.0"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4554
 msgid "Analog Surround 7.1"
@@ -431,11 +449,11 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4557
 msgid "Digital Surround 5.1 (IEC958/AC3)"
-msgstr "Envolvent digital 5.1 (IEC958/AC3)"
+msgstr "Envoltant digital 5.1 (IEC958/AC3)"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4558
 msgid "Digital Surround 5.1 (IEC958/DTS)"
-msgstr "So envoltant digital 5.1 (IEC958/DTS)"
+msgstr "Envoltant digital 5.1 (IEC958/DTS)"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4559
 msgid "Digital Stereo (HDMI)"
@@ -443,15 +461,15 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4560
 msgid "Digital Surround 5.1 (HDMI)"
-msgstr "So envoltant digital 5.1 (HDMI)"
+msgstr "Envoltant digital 5.1 (HDMI)"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4561
 msgid "Chat"
-msgstr ""
+msgstr "Xat"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4562
 msgid "Game"
-msgstr ""
+msgstr "Joc"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4696
 msgid "Analog Mono Duplex"
@@ -466,18 +484,16 @@
 msgstr "Dúplex estèreo digital (IEC958)"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4701
-#, fuzzy
 msgid "Multichannel Duplex"
-msgstr "Multicanal"
+msgstr "Dúplex Multicanal"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4702
-#, fuzzy
 msgid "Stereo Duplex"
-msgstr "Dúplex estèreo analògic"
+msgstr "Dúplex estèreo"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4703
 msgid "Mono Chat + 7.1 Surround"
-msgstr ""
+msgstr "Xat mono + 7.1 envoltant"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4806
 #, c-format
@@ -492,115 +508,87 @@
 #: spa/plugins/alsa/acp/alsa-util.c:1175 spa/plugins/alsa/acp/alsa-util.c:1269
 #, fuzzy, c-format
 msgid ""
-"snd_pcm_avail() returned a value that is exceptionally large: %lu byte (%lu "
-"ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_avail() returned a value that is exceptionally large: %lu byte (%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
 msgid_plural ""
-"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu "
-"ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
 msgstr0 ""
-"snd_pcm_avail() ha retornat un valor excepcionalment gran: %lu bytes (%lu "
-"ms).\n"
-"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu "
-"d'aquest incident als desenvolupadors de l'ALSA."
+"snd_pcm_avail() ha retornat un valor excepcionalment gran: %lu bytes (%lu ms).\n"
+"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu d'aquest incident als desenvolupadors de l'ALSA."
 msgstr1 ""
-"snd_pcm_avail() ha retornat un valor excepcionalment gran: %lu bytes (%lu "
-"ms).\n"
-"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu "
-"d'aquest incident als desenvolupadors de l'ALSA."
+"snd_pcm_avail() ha retornat un valor excepcionalment gran: %lu bytes (%lu ms).\n"
+"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu d'aquest incident als desenvolupadors de l'ALSA."
 
 #: spa/plugins/alsa/acp/alsa-util.c:1241
 #, fuzzy, c-format
 msgid ""
-"snd_pcm_delay() returned a value that is exceptionally large: %li byte (%s"
-"%lu ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_delay() returned a value that is exceptionally large: %li byte (%s%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
 msgid_plural ""
-"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s"
-"%lu ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
 msgstr0 ""
-"snd_pcm_delay() ha retornat un valor excepcionalment gran: %li bytes (%s%lu "
-"ms).\n"
-"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu "
-"d'aquest incident als desenvolupadors de l'ALSA."
+"snd_pcm_delay() ha retornat un valor excepcionalment gran: %li bytes (%s%lu ms).\n"
+"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu d'aquest incident als desenvolupadors de l'ALSA."
 msgstr1 ""
-"snd_pcm_delay() ha retornat un valor excepcionalment gran: %li bytes (%s%lu "
-"ms).\n"
-"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu "
-"d'aquest incident als desenvolupadors de l'ALSA."
+"snd_pcm_delay() ha retornat un valor excepcionalment gran: %li bytes (%s%lu ms).\n"
+"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu d'aquest incident als desenvolupadors de l'ALSA."
 
 #: spa/plugins/alsa/acp/alsa-util.c:1288
 #, c-format
 msgid ""
-"snd_pcm_avail_delay() returned strange values: delay %lu is less than avail "
-"%lu.\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_avail_delay() returned strange values: delay %lu is less than avail %lu.\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
 msgstr ""
-"snd_pcm_avail() ha retornat un valor excepcionalment gran: %lu bytes (%lu "
-"ms).\n"
-"Probablement es tracta d'un error del controlador d'ALSA «%s». Informeu "
-"d'aquest problema als desenvolupadors d'ALSA."
+"snd_pcm_avail() ha retornat un valor excepcionalment gran: %lu bytes (%lu ms).\n"
+"Probablement es tracta d'un error del controlador d'ALSA «%s». Informeu d'aquest problema als desenvolupadors d'ALSA."
 
 #: spa/plugins/alsa/acp/alsa-util.c:1331
 #, fuzzy, c-format
 msgid ""
-"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu byte "
-"(%lu ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu byte (%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
 msgid_plural ""
-"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes "
-"(%lu ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes (%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
 msgstr0 ""
-"snd_pcm_mmap_begin() ha retornat un valor excepcionalment gran: %lu bytes "
-"(%lu ms).\n"
-"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu "
-"d'aquest incident als desenvolupadors de l'ALSA."
+"snd_pcm_mmap_begin() ha retornat un valor excepcionalment gran: %lu bytes (%lu ms).\n"
+"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu d'aquest incident als desenvolupadors de l'ALSA."
 msgstr1 ""
-"snd_pcm_mmap_begin() ha retornat un valor excepcionalment gran: %lu bytes "
-"(%lu ms).\n"
-"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu "
-"d'aquest incident als desenvolupadors de l'ALSA."
+"snd_pcm_mmap_begin() ha retornat un valor excepcionalment gran: %lu bytes (%lu ms).\n"
+"Probablement es tracta d'un error del controlador de l'ALSA '%s'. Informeu d'aquest incident als desenvolupadors de l'ALSA."
 
 #: spa/plugins/bluez5/bluez5-device.c:1010
 msgid "Audio Gateway (A2DP Source & HSP/HFP AG)"
-msgstr ""
+msgstr "Passarel·la d'àudio (A2DP Source & HSP/HFP AG)"
 
 #: spa/plugins/bluez5/bluez5-device.c:1033
 #, c-format
 msgid "High Fidelity Playback (A2DP Sink, codec %s)"
-msgstr ""
+msgstr "Reproducció d'alta fidelitat (Sink A2DP, còdec %s)"
 
 #: spa/plugins/bluez5/bluez5-device.c:1035
 #, c-format
 msgid "High Fidelity Duplex (A2DP Source/Sink, codec %s)"
-msgstr ""
+msgstr "Dúplex d'alta fidelitat (A2DP Source/Sink, còdec %s)"
 
 #: spa/plugins/bluez5/bluez5-device.c:1041
 msgid "High Fidelity Playback (A2DP Sink)"
-msgstr ""
+msgstr "Reproducció d'alta fidelitat (A2DP Sink)"
 
 #: spa/plugins/bluez5/bluez5-device.c:1043
 msgid "High Fidelity Duplex (A2DP Source/Sink)"
-msgstr ""
+msgstr "Dúplex d'alta fidelitat (A2DP Source/Sink)"
 
 #: spa/plugins/bluez5/bluez5-device.c:1070
 #, c-format
 msgid "Headset Head Unit (HSP/HFP, codec %s)"
-msgstr ""
+msgstr "Unitat d'ariculars pel cap (HSP/HFP, còdec %s)"
 
 #: spa/plugins/bluez5/bluez5-device.c:1074
 msgid "Headset Head Unit (HSP/HFP)"
-msgstr ""
+msgstr "Unitat d'ariculars pel cap (HSP/HFP)"
 
 #: spa/plugins/bluez5/bluez5-device.c:1140
 msgid "Handsfree"
@@ -612,7 +600,7 @@
 
 #: spa/plugins/bluez5/bluez5-device.c:1160
 msgid "Portable"
-msgstr ""
+msgstr "Portable"
 
 #: spa/plugins/bluez5/bluez5-device.c:1165
 msgid "Car"
@@ -620,13 +608,12 @@
 
 #: spa/plugins/bluez5/bluez5-device.c:1170
 msgid "HiFi"
-msgstr ""
+msgstr "HiFi"
 
 #: spa/plugins/bluez5/bluez5-device.c:1175
 msgid "Phone"
 msgstr "Telèfon"
 
 #: spa/plugins/bluez5/bluez5-device.c:1181
-#, fuzzy
 msgid "Bluetooth"
-msgstr "Entrada bluetooth"
+msgstr "Bluetooth"

pipewire-0.3.56.tar.gz/po/gl.po -> pipewire-0.3.57.tar.gz/po/gl.po Changed

@@ -4,25 +4,31 @@
 # Translators:
 # bassball93 <bassball93@gmail.com>, 2011.
 # mbouzada <mbouzada@gmail.com>, 2011.
-# Fran Dieguez <frandieguez@gnome.org>, 2012, 2019.
 # Marcos Lans <marcoslansgarza@gmail.com>, 2018.
+# Fran Dieguez <frandieguez@gnome.org>, 2012-2022.
+#
 msgid ""
 msgstr ""
 "Project-Id-Version: PipeWire\n"
-"Report-Msgid-Bugs-To: https://gitlab.freedesktop.org/pipewire/pipewire/"
-"issues/new\n"
-"POT-Creation-Date: 2021-04-18 16:54+0800\n"
-"PO-Revision-Date: 2019-02-20 01:36+0200\n"
+"Report-Msgid-Bugs-To: https://gitlab.freedesktop.org/pipewire/pipewire/-/"
+"issues\n"
+"POT-Creation-Date: 2022-07-10 03:27+0000\n"
+"PO-Revision-Date: 2022-08-23 09:47+0200\n"
 "Last-Translator: Fran Dieguez <frandieguez@gnome.org>\n"
-"Language-Team: Galician\n"
+"Language-Team: Galician <Proxecto Trasno <proxecto@trasno.gal>>\n"
 "Language: gl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Virtaal 0.7.1\n"
-
-#: src/daemon/pipewire.c:43
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"X-Generator: Gtranslator 40.0\n"
+"X-DL-Team: gl\n"
+"X-DL-Module: PipeWire\n"
+"X-DL-Branch: master\n"
+"X-DL-Domain: po\n"
+"X-DL-State: Translating\n"
+
+#: src/daemon/pipewire.c:46
 #, c-format
 msgid ""
 "%s options\n"
@@ -30,6 +36,11 @@
 "      --version                         Show version\n"
 "  -c, --config                          Load config (Default %s)\n"
 msgstr ""
+"%s opcións\n"
+"  -h, --help                            Mostra esta axuda\n"
+"      --version                         Mostrar versión\n"
+"  -c, --config                          Cargar configuración (Predeterminado "
+"%s)\n"
 
 #: src/daemon/pipewire.desktop.in:4
 msgid "PipeWire Media System"
@@ -39,31 +50,52 @@
 msgid "Start the PipeWire Media System"
 msgstr "Iniciar o Sistema multimedia PipeWire"
 
-#: src/examples/media-session/alsa-monitor.c:526
-#: spa/plugins/alsa/acp/compat.c:187
-msgid "Built-in Audio"
-msgstr "Audio interno"
+#: src/modules/module-protocol-pulse/modules/module-tunnel-sink.c:180
+#: src/modules/module-protocol-pulse/modules/module-tunnel-source.c:180
+#, c-format
+msgid "Tunnel to %s/%s"
+msgstr "Túnel a %s/%s"
 
-#: src/examples/media-session/alsa-monitor.c:530
-#: spa/plugins/alsa/acp/compat.c:192
-msgid "Modem"
-msgstr "Módem"
+#: src/modules/module-fallback-sink.c:51
+#| msgid "Game Output"
+msgid "Dummy Output"
+msgstr "Saída de proba"
 
-#: src/examples/media-session/alsa-monitor.c:539
+#: src/modules/module-pulse-tunnel.c:648
+#, c-format
+msgid "Tunnel for %s@%s"
+msgstr "Túnel para %s@%s"
+
+#: src/modules/module-zeroconf-discover.c:332
 msgid "Unknown device"
-msgstr ""
+msgstr "Dispositivo descoñecido"
+
+#: src/modules/module-zeroconf-discover.c:344
+#, c-format
+msgid "%s on %s@%s"
+msgstr "%s en %s@%s"
+
+#: src/modules/module-zeroconf-discover.c:348
+#, c-format
+msgid "%s on %s"
+msgstr "%s en %s"
 
-#: src/tools/pw-cat.c:991
+#: src/tools/pw-cat.c:784
 #, c-format
 msgid ""
-"%s options <file>\n"
+"%s options <file>|-\n"
 "  -h, --help                            Show this help\n"
 "      --version                         Show version\n"
 "  -v, --verbose                         Enable verbose operations\n"
 "\n"
 msgstr ""
+"%s opcións <ficheiro>|-\n"
+"  -h, --help                            Mostrar esta axuda\n"
+"      --version                         Mostrar versión\n"
+"  -v, --verbose                         Activar operacións verbosas\n"
+"\n"
 
-#: src/tools/pw-cat.c:998
+#: src/tools/pw-cat.c:791
 #, c-format
 msgid ""
 "  -R, --remote                          Remote daemon name\n"
@@ -77,11 +109,29 @@
 "                                          or direct samples (256)\n"
 "                                          the rate is the one of the source "
 "file\n"
-"      --list-targets                    List available targets for --target\n"
+"  -P  --properties                      Set node properties\n"
 "\n"
 msgstr ""
+"  -R, --remote                          Nome do daemon remoto\n"
+"      --media-type                      Estabelecer o tipo de medio (por "
+"omisión %s)\n"
+"      --media-category                  Estabelecer a categoría multimedia "
+"(por omisión %s)\n"
+"      --media-role                      Estabelecer o rol multimedia (por "
+"omisión %s)\n"
+"      --target                          Estabelecer o nodo obxectivo (por "
+"omisión %s)\n"
+"                                          0 significa non ligar\n"
+"      --latency                         Estabelecer a latencia do nodo (por "
+"omisión %s)\n"
+"                                          Xunit (unidade = s, ms, us, ns)\n"
+"                                          ou mostras directas samples (256)\n"
+"                                          a taxa é un dos ficheiros de "
+"orixe\n"
+"  -P  --properties                      Estabelecer as propiedades do nodo\n"
+"\n"
 
-#: src/tools/pw-cat.c:1016
+#: src/tools/pw-cat.c:809
 #, c-format
 msgid ""
 "      --rate                            Sample rate (req. for rec) (default "
@@ -100,16 +150,38 @@
 "%d)\n"
 "\n"
 msgstr ""
+"      --rate                            Taxa de mostreo (solicitudes por "
+"segundo) (por omisión %u)\n"
+"      --channels                        Número de canles (solicitudes por "
+"segundo) (por omisión %u)\n"
+"      --channel-map                     Mapa de canles\n"
+"                                            un de: \"stereo\", "
+"\"surround-51\",... or\n"
+"                                            lista separada por comas dos "
+"nomes das canles: p.ex. \"FL,FR\"\n"
+"      --format                          Formato de mostras %s (solicitudes "
+"por segundo) (por omisión %s)\n"
+"      --volume                          Volume do fluxo 0-1.0 (por omisión "
+"%.3f)\n"
+"  -q  --quality                         Calidade do remostreador (0 - 15) "
+"(por omisión %d)\n"
+"\n"
 
-#: src/tools/pw-cat.c:1033
+#: src/tools/pw-cat.c:826
 msgid ""
 "  -p, --playback                        Playback mode\n"
 "  -r, --record                          Recording mode\n"
 "  -m, --midi                            Midi mode\n"
+"  -d, --dsd                             DSD mode\n"
 "\n"
 msgstr ""
+"  -p, --playback                        Modo de reprodución\n"
+"  -r, --record                          Modo de grabación\n"
+"  -m, --midi                            Modo MIDI\n"
+"  -d, --dsd                             Modo DSD\n"
+"\n"
 
-#: src/tools/pw-cli.c:2932
+#: src/tools/pw-cli.c:3165
 #, c-format
 msgid ""
 "%s options command\n"
@@ -119,355 +191,352 @@
 "  -r, --remote                          Remote daemon name\n"
 "\n"
 msgstr ""
+"%s opcións orde\n"
+"  -h, --help                            Mostrar esta axuda\n"
+"      --version                         Mostrar versión\n"
+"  -d, --daemon                          Iniciar como demonio (Por omisión "
+"falso)\n"
+"  -r, --remote                          Modo de demonio remoto\n"
+"\n"
 
-#: spa/plugins/alsa/acp/acp.c:290
+#: spa/plugins/alsa/acp/acp.c:321
 msgid "Pro Audio"
-msgstr ""
+msgstr "Pro Audio"
 
-#: spa/plugins/alsa/acp/acp.c:411 spa/plugins/alsa/acp/alsa-mixer.c:4704
-#: spa/plugins/bluez5/bluez5-device.c:1000
+#: spa/plugins/alsa/acp/acp.c:446 spa/plugins/alsa/acp/alsa-mixer.c:4648
+#: spa/plugins/bluez5/bluez5-device.c:1185
 msgid "Off"
 msgstr "Apagado"
 
-#: spa/plugins/alsa/acp/channelmap.h:466
-msgid "(invalid)"
-msgstr "(incorrecto)"
-
-#: spa/plugins/alsa/acp/alsa-mixer.c:2709
+#: spa/plugins/alsa/acp/alsa-mixer.c:2652
 msgid "Input"
 msgstr "Entrada"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2710
+#: spa/plugins/alsa/acp/alsa-mixer.c:2653
 msgid "Docking Station Input"
 msgstr "Entrada de estación acoplada (Docking Station)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2711
+#: spa/plugins/alsa/acp/alsa-mixer.c:2654
 msgid "Docking Station Microphone"
 msgstr "Micrófono da estación acoplada (Docking Station)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2712
+#: spa/plugins/alsa/acp/alsa-mixer.c:2655
 msgid "Docking Station Line In"
 msgstr "Entrada de estación acoplada (Docking Station)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2713
-#: spa/plugins/alsa/acp/alsa-mixer.c:2804
+#: spa/plugins/alsa/acp/alsa-mixer.c:2656
+#: spa/plugins/alsa/acp/alsa-mixer.c:2747
 msgid "Line In"
 msgstr "Liña de entrada"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2714
-#: spa/plugins/alsa/acp/alsa-mixer.c:2798
-#: spa/plugins/bluez5/bluez5-device.c:1145
+#: spa/plugins/alsa/acp/alsa-mixer.c:2657
+#: spa/plugins/alsa/acp/alsa-mixer.c:2741
+#: spa/plugins/bluez5/bluez5-device.c:1357
 msgid "Microphone"
 msgstr "Micrófono"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2715
-#: spa/plugins/alsa/acp/alsa-mixer.c:2799
+#: spa/plugins/alsa/acp/alsa-mixer.c:2658
+#: spa/plugins/alsa/acp/alsa-mixer.c:2742
 msgid "Front Microphone"
 msgstr "Micrófono frontal"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2716
-#: spa/plugins/alsa/acp/alsa-mixer.c:2800
+#: spa/plugins/alsa/acp/alsa-mixer.c:2659
+#: spa/plugins/alsa/acp/alsa-mixer.c:2743
 msgid "Rear Microphone"
 msgstr "Micrófono traseiro"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2717
+#: spa/plugins/alsa/acp/alsa-mixer.c:2660
 msgid "External Microphone"
 msgstr "Micrófono externo"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2718
-#: spa/plugins/alsa/acp/alsa-mixer.c:2802
+#: spa/plugins/alsa/acp/alsa-mixer.c:2661
+#: spa/plugins/alsa/acp/alsa-mixer.c:2745
 msgid "Internal Microphone"
 msgstr "Micrófono interno"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2719
-#: spa/plugins/alsa/acp/alsa-mixer.c:2805
+#: spa/plugins/alsa/acp/alsa-mixer.c:2662
+#: spa/plugins/alsa/acp/alsa-mixer.c:2748
 msgid "Radio"
 msgstr "Radio"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2720
-#: spa/plugins/alsa/acp/alsa-mixer.c:2806
+#: spa/plugins/alsa/acp/alsa-mixer.c:2663
+#: spa/plugins/alsa/acp/alsa-mixer.c:2749
 msgid "Video"
 msgstr "Vídeo"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2721
+#: spa/plugins/alsa/acp/alsa-mixer.c:2664
 msgid "Automatic Gain Control"
 msgstr "Control automático de ganancia"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2722
+#: spa/plugins/alsa/acp/alsa-mixer.c:2665
 msgid "No Automatic Gain Control"
 msgstr "Sen control automático de ganancia"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2723
+#: spa/plugins/alsa/acp/alsa-mixer.c:2666
 msgid "Boost"
 msgstr "Enfatizador"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2724
+#: spa/plugins/alsa/acp/alsa-mixer.c:2667
 msgid "No Boost"
 msgstr "Sen enfatizador"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2725
+#: spa/plugins/alsa/acp/alsa-mixer.c:2668
 msgid "Amplifier"
 msgstr "Amplificador"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2726
+#: spa/plugins/alsa/acp/alsa-mixer.c:2669
 msgid "No Amplifier"
 msgstr "Sen amplificador"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2727
+#: spa/plugins/alsa/acp/alsa-mixer.c:2670
 msgid "Bass Boost"
 msgstr "Enfatizador baixo"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2728
+#: spa/plugins/alsa/acp/alsa-mixer.c:2671
 msgid "No Bass Boost"
 msgstr "Sen enfatizador baixo"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2729
-#: spa/plugins/bluez5/bluez5-device.c:1150
+#: spa/plugins/alsa/acp/alsa-mixer.c:2672
+#: spa/plugins/bluez5/bluez5-device.c:1363
 msgid "Speaker"
 msgstr "Altofalante"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2730
-#: spa/plugins/alsa/acp/alsa-mixer.c:2808
+#: spa/plugins/alsa/acp/alsa-mixer.c:2673
+#: spa/plugins/alsa/acp/alsa-mixer.c:2751
 msgid "Headphones"
 msgstr "Auriculares"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2797
+#: spa/plugins/alsa/acp/alsa-mixer.c:2740
 msgid "Analog Input"
 msgstr "Entrada analóxica"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2801
+#: spa/plugins/alsa/acp/alsa-mixer.c:2744
 msgid "Dock Microphone"
 msgstr "Micrófono do acople"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2803
+#: spa/plugins/alsa/acp/alsa-mixer.c:2746
 msgid "Headset Microphone"
 msgstr "Micrófono con auricular"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2807
+#: spa/plugins/alsa/acp/alsa-mixer.c:2750
 msgid "Analog Output"
 msgstr "Saída analóxica"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2809
-#, fuzzy
+#: spa/plugins/alsa/acp/alsa-mixer.c:2752
 msgid "Headphones 2"
-msgstr "Auriculares"
+msgstr "Auriculares 2"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2810
+#: spa/plugins/alsa/acp/alsa-mixer.c:2753
 msgid "Headphones Mono Output"
 msgstr "Saída monoaural para auriculares"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2811
+#: spa/plugins/alsa/acp/alsa-mixer.c:2754
 msgid "Line Out"
 msgstr "Liña de saída"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2812
+#: spa/plugins/alsa/acp/alsa-mixer.c:2755
 msgid "Analog Mono Output"
 msgstr "Saída monoaural analóxica"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2813
+#: spa/plugins/alsa/acp/alsa-mixer.c:2756
 msgid "Speakers"
 msgstr "Altofalantes"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2814
+#: spa/plugins/alsa/acp/alsa-mixer.c:2757
 msgid "HDMI / DisplayPort"
 msgstr "HDMI / DisplayPort"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2815
+#: spa/plugins/alsa/acp/alsa-mixer.c:2758
 msgid "Digital Output (S/PDIF)"
 msgstr "Saída dixital (S/PDIF)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2816
+#: spa/plugins/alsa/acp/alsa-mixer.c:2759
 msgid "Digital Input (S/PDIF)"
 msgstr "Entrada dixital (S/PDIF)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2817
+#: spa/plugins/alsa/acp/alsa-mixer.c:2760
 msgid "Multichannel Input"
 msgstr "Entrada multicanle"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2818
+#: spa/plugins/alsa/acp/alsa-mixer.c:2761
 msgid "Multichannel Output"
 msgstr "Saída multicanle"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2819
+#: spa/plugins/alsa/acp/alsa-mixer.c:2762
 msgid "Game Output"
 msgstr "Saída do xogo"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2820
-#: spa/plugins/alsa/acp/alsa-mixer.c:2821
+#: spa/plugins/alsa/acp/alsa-mixer.c:2763
+#: spa/plugins/alsa/acp/alsa-mixer.c:2764
 msgid "Chat Output"
 msgstr "Saída do chat"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2822
-#, fuzzy
+#: spa/plugins/alsa/acp/alsa-mixer.c:2765
 msgid "Chat Input"
-msgstr "Saída do chat"
+msgstr "Entrada de chat"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:2823
-#, fuzzy
+#: spa/plugins/alsa/acp/alsa-mixer.c:2766
 msgid "Virtual Surround 7.1"
-msgstr "Sumideiro envolvente virtual"
+msgstr "Envolvente virtual 7.1"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4527
+#: spa/plugins/alsa/acp/alsa-mixer.c:4471
 msgid "Analog Mono"
 msgstr "Monoaural analóxico"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4528
-#, fuzzy
+#: spa/plugins/alsa/acp/alsa-mixer.c:4472
 msgid "Analog Mono (Left)"
-msgstr "Monoaural analóxico"
+msgstr "Monoaural analóxico (Esquerda)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4529
-#, fuzzy
+#: spa/plugins/alsa/acp/alsa-mixer.c:4473
 msgid "Analog Mono (Right)"
-msgstr "Monoaural analóxico"
+msgstr "Monoaural analóxico (Dereita)"
 
 #. Note: Not translated to "Analog Stereo Input", because the source
 #. * name gets "Input" appended to it automatically, so adding "Input"
 #. * here would lead to the source name to become "Analog Stereo Input
 #. * Input". The same logic applies to analog-stereo-output,
 #. * multichannel-input and multichannel-output.
-#: spa/plugins/alsa/acp/alsa-mixer.c:4530
-#: spa/plugins/alsa/acp/alsa-mixer.c:4538
-#: spa/plugins/alsa/acp/alsa-mixer.c:4539
+#: spa/plugins/alsa/acp/alsa-mixer.c:4474
+#: spa/plugins/alsa/acp/alsa-mixer.c:4482
+#: spa/plugins/alsa/acp/alsa-mixer.c:4483
 msgid "Analog Stereo"
 msgstr "Estéreo analóxico"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4531
+#: spa/plugins/alsa/acp/alsa-mixer.c:4475
 msgid "Mono"
 msgstr "Mono"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4532
+#: spa/plugins/alsa/acp/alsa-mixer.c:4476
 msgid "Stereo"
 msgstr "Estéreo"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4540
-#: spa/plugins/alsa/acp/alsa-mixer.c:4698
-#: spa/plugins/bluez5/bluez5-device.c:1135
+#: spa/plugins/alsa/acp/alsa-mixer.c:4484
+#: spa/plugins/alsa/acp/alsa-mixer.c:4642
+#: spa/plugins/bluez5/bluez5-device.c:1345
 msgid "Headset"
 msgstr "Auriculares con micro"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4541
-#: spa/plugins/alsa/acp/alsa-mixer.c:4699
-#, fuzzy
+#: spa/plugins/alsa/acp/alsa-mixer.c:4485
+#: spa/plugins/alsa/acp/alsa-mixer.c:4643
 msgid "Speakerphone"
 msgstr "Altofalante"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4542
-#: spa/plugins/alsa/acp/alsa-mixer.c:4543
+#: spa/plugins/alsa/acp/alsa-mixer.c:4486
+#: spa/plugins/alsa/acp/alsa-mixer.c:4487
 msgid "Multichannel"
 msgstr "Multicanle"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4544
+#: spa/plugins/alsa/acp/alsa-mixer.c:4488
 msgid "Analog Surround 2.1"
 msgstr "Envolvente analóxico 2.1"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4545
+#: spa/plugins/alsa/acp/alsa-mixer.c:4489
 msgid "Analog Surround 3.0"
 msgstr "Envolvente analóxico 3.0"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4546
+#: spa/plugins/alsa/acp/alsa-mixer.c:4490
 msgid "Analog Surround 3.1"
 msgstr "Envolvente analóxico 3.1"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4547
+#: spa/plugins/alsa/acp/alsa-mixer.c:4491
 msgid "Analog Surround 4.0"
 msgstr "Envolvente analóxico 4.0"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4548
+#: spa/plugins/alsa/acp/alsa-mixer.c:4492
 msgid "Analog Surround 4.1"
 msgstr "Envolvente analóxico 4.1"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4549
+#: spa/plugins/alsa/acp/alsa-mixer.c:4493
 msgid "Analog Surround 5.0"
 msgstr "Envolvente analóxico 5.0"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4550
+#: spa/plugins/alsa/acp/alsa-mixer.c:4494
 msgid "Analog Surround 5.1"
 msgstr "Envolvente analóxico 5.1"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4551
+#: spa/plugins/alsa/acp/alsa-mixer.c:4495
 msgid "Analog Surround 6.0"
 msgstr "Envolvente analóxico 6.0"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4552
+#: spa/plugins/alsa/acp/alsa-mixer.c:4496
 msgid "Analog Surround 6.1"
 msgstr "Envolvente analóxico 6.1"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4553
+#: spa/plugins/alsa/acp/alsa-mixer.c:4497
 msgid "Analog Surround 7.0"
 msgstr "Envolvente analóxico 7.0"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4554
+#: spa/plugins/alsa/acp/alsa-mixer.c:4498
 msgid "Analog Surround 7.1"
 msgstr "Envolvente analóxico 7.1"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4555
+#: spa/plugins/alsa/acp/alsa-mixer.c:4499
 msgid "Digital Stereo (IEC958)"
 msgstr "Estéreo dixital (IEC958)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4556
+#: spa/plugins/alsa/acp/alsa-mixer.c:4500
 msgid "Digital Surround 4.0 (IEC958/AC3)"
 msgstr "Envolvente dixital 4.0 (IEC958/AC3)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4557
+#: spa/plugins/alsa/acp/alsa-mixer.c:4501
 msgid "Digital Surround 5.1 (IEC958/AC3)"
 msgstr "Envolvente dixital 5.1 (IEC958/AC3)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4558
+#: spa/plugins/alsa/acp/alsa-mixer.c:4502
 msgid "Digital Surround 5.1 (IEC958/DTS)"
 msgstr "Envolvente dixital 5.1 (IEC958/ACDTS)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4559
+#: spa/plugins/alsa/acp/alsa-mixer.c:4503
 msgid "Digital Stereo (HDMI)"
 msgstr "Estéreo dixital (HDMI)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4560
+#: spa/plugins/alsa/acp/alsa-mixer.c:4504
 msgid "Digital Surround 5.1 (HDMI)"
 msgstr "Envolvente dixital 5.1 (HDMI)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4561
+#: spa/plugins/alsa/acp/alsa-mixer.c:4505
 msgid "Chat"
-msgstr ""
+msgstr "Chat"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4562
+#: spa/plugins/alsa/acp/alsa-mixer.c:4506
 msgid "Game"
-msgstr ""
+msgstr "Xogo"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4696
+#: spa/plugins/alsa/acp/alsa-mixer.c:4640
 msgid "Analog Mono Duplex"
 msgstr "Monoaural analóxico dúplex"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4697
+#: spa/plugins/alsa/acp/alsa-mixer.c:4641
 msgid "Analog Stereo Duplex"
 msgstr "Estéreo analóxico dúplex"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4700
+#: spa/plugins/alsa/acp/alsa-mixer.c:4644
 msgid "Digital Stereo Duplex (IEC958)"
 msgstr "Estéreo dixital dúplex (IEC958)"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4701
+#: spa/plugins/alsa/acp/alsa-mixer.c:4645
 msgid "Multichannel Duplex"
 msgstr "Dúplex multicanle"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4702
+#: spa/plugins/alsa/acp/alsa-mixer.c:4646
 msgid "Stereo Duplex"
 msgstr "Dúplex estéreo"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4703
+#: spa/plugins/alsa/acp/alsa-mixer.c:4647
 msgid "Mono Chat + 7.1 Surround"
-msgstr ""
+msgstr "Chat mono + envolvente 7.1"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4806
+#: spa/plugins/alsa/acp/alsa-mixer.c:4754
 #, c-format
 msgid "%s Output"
 msgstr "Saída %s"
 
-#: spa/plugins/alsa/acp/alsa-mixer.c:4813
+#: spa/plugins/alsa/acp/alsa-mixer.c:4761
 #, c-format
 msgid "%s Input"
 msgstr "Entrada %s"
 
-#: spa/plugins/alsa/acp/alsa-util.c:1175 spa/plugins/alsa/acp/alsa-util.c:1269
+#: spa/plugins/alsa/acp/alsa-util.c:1173 spa/plugins/alsa/acp/alsa-util.c:1267
 #, c-format
 msgid ""
 "snd_pcm_avail() returned a value that is exceptionally large: %lu byte (%lu "
@@ -490,16 +559,16 @@
 "O máis probábel é que sexa un erro do controlador ALSA «%s». Informe disto "
 "aos desenvolvedores de ALSA."
 
-#: spa/plugins/alsa/acp/alsa-util.c:1241
+#: spa/plugins/alsa/acp/alsa-util.c:1239
 #, c-format
 msgid ""
-"snd_pcm_delay() returned a value that is exceptionally large: %li byte (%s"
-"%lu ms).\n"
+"snd_pcm_delay() returned a value that is exceptionally large: %li byte "
+"(%s%lu ms).\n"
 "Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
 "to the ALSA developers."
 msgid_plural ""
-"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s"
-"%lu ms).\n"
+"snd_pcm_delay() returned a value that is exceptionally large: %li bytes "
+"(%s%lu ms).\n"
 "Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
 "to the ALSA developers."
 msgstr0 ""
@@ -513,7 +582,7 @@
 "O máis probábel é que sexa un erro do controlador ALSA «%s». Informe disto "
 "aos desenvolvedores de ALSA."
 
-#: spa/plugins/alsa/acp/alsa-util.c:1288
+#: spa/plugins/alsa/acp/alsa-util.c:1286
 #, c-format
 msgid ""
 "snd_pcm_avail_delay() returned strange values: delay %lu is less than avail "
@@ -526,7 +595,7 @@
 "O máis probábel é que sexa un erro do controlador ALSA «%s». Informe disto "
 "aos desenvolvedores de ALSA."
 
-#: spa/plugins/alsa/acp/alsa-util.c:1331
+#: spa/plugins/alsa/acp/alsa-util.c:1329
 #, c-format
 msgid ""
 "snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu byte "
@@ -549,62 +618,90 @@
 "O máis probábel é que sexa un erro do controlador ALSA «%s». Informe disto "
 "aos desenvolvedores de ALSA."
 
-#: spa/plugins/bluez5/bluez5-device.c:1010
+#: spa/plugins/alsa/acp/channelmap.h:457
+msgid "(invalid)"
+msgstr "(incorrecto)"
+
+#: spa/plugins/alsa/acp/compat.c:189
+msgid "Built-in Audio"
+msgstr "Audio interno"
+
+#: spa/plugins/alsa/acp/compat.c:194
+msgid "Modem"
+msgstr "Módem"
+
+#: spa/plugins/bluez5/bluez5-device.c:1196
 msgid "Audio Gateway (A2DP Source & HSP/HFP AG)"
-msgstr ""
+msgstr "Porta de enlace de son (Orixe A2DP e HSP/HFP AG)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1033
+#: spa/plugins/bluez5/bluez5-device.c:1221
 #, c-format
 msgid "High Fidelity Playback (A2DP Sink, codec %s)"
-msgstr ""
+msgstr "Reprodución de alta fidelidade (Sumideiro A2DP, códec %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1035
+#: spa/plugins/bluez5/bluez5-device.c:1224
 #, c-format
 msgid "High Fidelity Duplex (A2DP Source/Sink, codec %s)"
-msgstr ""
+msgstr "Dúplex de alta fidelidade (Orixe/sumideiro A2DP, códec %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1041
+#: spa/plugins/bluez5/bluez5-device.c:1232
 msgid "High Fidelity Playback (A2DP Sink)"
-msgstr ""
+msgstr "Reprodución de alta fidelidade (Sumideiro A2DP)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1043
+#: spa/plugins/bluez5/bluez5-device.c:1234
 msgid "High Fidelity Duplex (A2DP Source/Sink)"
-msgstr ""
+msgstr "Dúplex de alta fidelidade (Orixe/sumideiro A2DP)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1070
+#: spa/plugins/bluez5/bluez5-device.c:1262
 #, c-format
 msgid "Headset Head Unit (HSP/HFP, codec %s)"
-msgstr ""
+msgstr "Unidade de auriculares de cabeza  (HSP/HFP, códec %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1074
+#: spa/plugins/bluez5/bluez5-device.c:1267
 msgid "Headset Head Unit (HSP/HFP)"
-msgstr ""
-
-#: spa/plugins/bluez5/bluez5-device.c:1140
+msgstr "Unidade de auriculares de cabeza  (HSP/HFP)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1346
+#: spa/plugins/bluez5/bluez5-device.c:1351
+#: spa/plugins/bluez5/bluez5-device.c:1358
+#: spa/plugins/bluez5/bluez5-device.c:1364
+#: spa/plugins/bluez5/bluez5-device.c:1370
+#: spa/plugins/bluez5/bluez5-device.c:1376
+#: spa/plugins/bluez5/bluez5-device.c:1382
+#: spa/plugins/bluez5/bluez5-device.c:1388
+#: spa/plugins/bluez5/bluez5-device.c:1394
 msgid "Handsfree"
 msgstr "Sen mans"
 
-#: spa/plugins/bluez5/bluez5-device.c:1155
+#: spa/plugins/bluez5/bluez5-device.c:1352
+#| msgid "Handsfree"
+msgid "Handsfree (HFP)"
+msgstr "Sen mans (HFP)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1369
 msgid "Headphone"
 msgstr "Auriculares"
 
-#: spa/plugins/bluez5/bluez5-device.c:1160
+#: spa/plugins/bluez5/bluez5-device.c:1375
 msgid "Portable"
 msgstr "Portátil"
 
-#: spa/plugins/bluez5/bluez5-device.c:1165
+#: spa/plugins/bluez5/bluez5-device.c:1381
 msgid "Car"
 msgstr "Automóbil"
 
-#: spa/plugins/bluez5/bluez5-device.c:1170
+#: spa/plugins/bluez5/bluez5-device.c:1387
 msgid "HiFi"
-msgstr "Hifi"
+msgstr "HiFi"
 
-#: spa/plugins/bluez5/bluez5-device.c:1175
+#: spa/plugins/bluez5/bluez5-device.c:1393
 msgid "Phone"
 msgstr "Teléfono"
 
-#: spa/plugins/bluez5/bluez5-device.c:1181
-#, fuzzy
+#: spa/plugins/bluez5/bluez5-device.c:1400
 msgid "Bluetooth"
-msgstr "Entrada de Bluetooth"
+msgstr "Bluetooth"
+
+#: spa/plugins/bluez5/bluez5-device.c:1401
+msgid "Bluetooth (HFP)"
+msgstr "Bluetooth (HFP)"

pipewire-0.3.57.tar.gz/po/ka.po Added

@@ -0,0 +1,661 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the pipewire package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: pipewire\n"
+"Report-Msgid-Bugs-To: https://gitlab.freedesktop.org/pipewire/pipewire/"
+"issues/new\n"
+"POT-Creation-Date: 2022-06-30 12:50+0200\n"
+"PO-Revision-Date: 2022-07-25 13:11+0200\n"
+"Last-Translator: Temuri Doghonadze <temuri.doghonadze@gmail.com>\n"
+"Language-Team: Georgian <(nothing)>\n"
+"Language: ka\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Poedit 3.1.1\n"
+
+#: src/daemon/pipewire.c:46
+#, c-format
+msgid ""
+"%s options\n"
+"  -h, --help                            Show this help\n"
+"      --version                         Show version\n"
+"  -c, --config                          Load config (Default %s)\n"
+msgstr ""
+"%s პარამეტრები\n"
+"   -h, --help ამ დახმარების ჩვენება\n"
+"       --version ვერსიის ჩვენება\n"
+"   -c, --config ჩატვირთვის კონფიგურაცია (ნაგულისხმები %s)\n"
+
+#: src/modules/module-protocol-pulse/modules/module-tunnel-sink.c:180
+#: src/modules/module-protocol-pulse/modules/module-tunnel-source.c:180
+#, c-format
+msgid "Tunnel to %s/%s"
+msgstr "გვირაბი %s/%s -მდე"
+
+#: src/modules/module-fallback-sink.c:51
+msgid "Dummy Output"
+msgstr "ნულოვანი გამოყვანა"
+
+#: src/modules/module-pulse-tunnel.c:648
+#, c-format
+msgid "Tunnel for %s@%s"
+msgstr "გვირაბი %s@%s-სთვის"
+
+#: src/modules/module-zeroconf-discover.c:332
+msgid "Unknown device"
+msgstr "უცნობი მოწყობილობა"
+
+#: src/modules/module-zeroconf-discover.c:344
+#, c-format
+msgid "%s on %s@%s"
+msgstr "%s %s@%s -ზე"
+
+#: src/modules/module-zeroconf-discover.c:348
+#, c-format
+msgid "%s on %s"
+msgstr "%s %s-ზე"
+
+#: src/tools/pw-cat.c:784
+#, c-format
+msgid ""
+"%s options <file>|-\n"
+"  -h, --help                            Show this help\n"
+"      --version                         Show version\n"
+"  -v, --verbose                         Enable verbose operations\n"
+"\n"
+msgstr ""
+"%s პარამეტრები <ფაილი>|-\n"
+"   -h, --help ამ დახმარების ჩვენება\n"
+"       --version ვერსიის ჩვენება\n"
+"   -v, --verbose დამატებითი შეტყობინებების გამოტანა\n"
+"\n"
+
+#: src/tools/pw-cat.c:791
+#, c-format
+msgid ""
+"  -R, --remote                          Remote daemon name\n"
+"      --media-type                      Set media type (default %s)\n"
+"      --media-category                  Set media category (default %s)\n"
+"      --media-role                      Set media role (default %s)\n"
+"      --target                          Set node target (default %s)\n"
+"                                          0 means don't link\n"
+"      --latency                         Set node latency (default %s)\n"
+"                                          Xunit (unit = s, ms, us, ns)\n"
+"                                          or direct samples (256)\n"
+"                                          the rate is the one of the source "
+"file\n"
+"  -P  --properties                      Set node properties\n"
+"\n"
+msgstr ""
+"  -R, --remote დაშორებული დემონის სახელი\n"
+"       --media-type მედიის ტიპის დაყენება (ნაგულისხმები %s)\n"
+"       --media-category მედია კატეგორიის დაყენება (ნაგულისხმები %s)\n"
+"       --media-role მედიის როლის დაყენება (ნაგულისხმები %s)\n"
+"       --target კვანძის სამიზნის დაყენება (ნაგულისხმები %s)\n"
+"                                           0 ნიშნავს არ მიბმა\n"
+"       --latency კვანძის შეყოვნების დაყენება (ნაგულისხმები %s)\n"
+"                                           Xunit (ერთეული = s, ms, us, ns)\n"
+"                                           ან პირდაპირი ნიმუშები (256)\n"
+"                                           მაჩვენებელი არის ერთ-ერთი წყაროს "
+"ფაილი\n"
+"   -P --properties კვანძის თვისებების დაყენება\n"
+
+#: src/tools/pw-cat.c:809
+#, c-format
+msgid ""
+"      --rate                            Sample rate (req. for rec) (default "
+"%u)\n"
+"      --channels                        Number of channels (req. for rec) "
+"(default %u)\n"
+"      --channel-map                     Channel map\n"
+"                                            one of: \"stereo\", "
+"\"surround-51\",... or\n"
+"                                            comma separated list of channel "
+"names: eg. \"FL,FR\"\n"
+"      --format                          Sample format %s (req. for rec) "
+"(default %s)\n"
+"      --volume                          Stream volume 0-1.0 (default %.3f)\n"
+"  -q  --quality                         Resampler quality (0 - 15) (default "
+"%d)\n"
+"\n"
+msgstr ""
+"    --rate სემპლის_სიჩქარე (მოთხოვნილება rec.) (ნაგულისხმები %u)\n"
+"       --channels არხების რაოდენობა (მოთხოვნილი ჩანაწერისთვის) (ნაგულისხმები "
+"%u)\n"
+"       --channel-map არხის რუკა\n"
+"                                             ერთ-ერთი: \"stereo\", "
+"\"surround-51\",... ან\n"
+"                                             მძიმით გამოყოფილი არხის "
+"სახელების სია: მაგ. \"FL, FR\"\n"
+"       --format                     ნიმუშის ფორმატი %s (მოთხოვნილება rec.) "
+"(ნაგულისხმები %s)\n"
+"       --volume               ნაკადის მოცულობა 0-1.0 (ნაგულისხმები %.3f)\n"
+"   -q --quality                         Resampler ხარისხი (0 - 15) "
+"(ნაგულისხმები %d)\n"
+
+#: src/tools/pw-cat.c:826
+msgid ""
+"  -p, --playback                        Playback mode\n"
+"  -r, --record                          Recording mode\n"
+"  -m, --midi                            Midi mode\n"
+"  -d, --dsd                             DSD mode\n"
+"\n"
+msgstr ""
+"   -p, --playback                        დაკვრის რეჟიმი\n"
+"   -r, -- record                          ჩაწერის რეჟიმი\n"
+"   -m, --midi                            Midi რეჟიმი\n"
+"   -d, --dsd                             DSD რეჟიმი\n"
+"\n"
+
+#: src/tools/pw-cli.c:3165
+#, c-format
+msgid ""
+"%s options command\n"
+"  -h, --help                            Show this help\n"
+"      --version                         Show version\n"
+"  -d, --daemon                          Start as daemon (Default false)\n"
+"  -r, --remote                          Remote daemon name\n"
+"\n"
+msgstr ""
+"%s პარამეტრები ბრძანება\n"
+"   -h, --help                            ამ დახმარების ჩვენება\n"
+"       --version                         ვერსიის ჩვენება\n"
+"   -d, --daemon                          დაწყება როგორც დემონი (ნაგულისხმები "
+"false)\n"
+"   -r, --remote                          დაშორებული დემონის სახელი\n"
+
+#: spa/plugins/alsa/acp/acp.c:321
+msgid "Pro Audio"
+msgstr "Pro Audio"
+
+#: spa/plugins/alsa/acp/acp.c:446 spa/plugins/alsa/acp/alsa-mixer.c:4648
+#: spa/plugins/bluez5/bluez5-device.c:1161
+msgid "Off"
+msgstr "გამორთული"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2652
+msgid "Input"
+msgstr "შეყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2653
+msgid "Docking Station Input"
+msgstr "Docking Station-ის შეყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2654
+msgid "Docking Station Microphone"
+msgstr "Docking Station-ის მიკროფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2655
+msgid "Docking Station Line In"
+msgstr "Docking Station Line In"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2656
+#: spa/plugins/alsa/acp/alsa-mixer.c:2747
+msgid "Line In"
+msgstr "Line In"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2657
+#: spa/plugins/alsa/acp/alsa-mixer.c:2741
+#: spa/plugins/bluez5/bluez5-device.c:1330
+msgid "Microphone"
+msgstr "მიკროფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2658
+#: spa/plugins/alsa/acp/alsa-mixer.c:2742
+msgid "Front Microphone"
+msgstr "წინა მიკროფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2659
+#: spa/plugins/alsa/acp/alsa-mixer.c:2743
+msgid "Rear Microphone"
+msgstr "უკანა მიკფოფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2660
+msgid "External Microphone"
+msgstr "გარე მიკროფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2661
+#: spa/plugins/alsa/acp/alsa-mixer.c:2745
+msgid "Internal Microphone"
+msgstr "შიდა მიკროფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2662
+#: spa/plugins/alsa/acp/alsa-mixer.c:2748
+msgid "Radio"
+msgstr "რადიო"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2663
+#: spa/plugins/alsa/acp/alsa-mixer.c:2749
+msgid "Video"
+msgstr "ვიდეო"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2664
+msgid "Automatic Gain Control"
+msgstr "ხმის მომატების ავტომატური კონტროლი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2665
+msgid "No Automatic Gain Control"
+msgstr "ხმის მომატების ავტომატური კონტროლის გამორთვა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2666
+msgid "Boost"
+msgstr "გაძლიერება"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2667
+msgid "No Boost"
+msgstr "გაძლიერების გარეშე"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2668
+msgid "Amplifier"
+msgstr "გამაძლიერებელი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2669
+msgid "No Amplifier"
+msgstr "გამაძლიერებლის გარეშე"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2670
+msgid "Bass Boost"
+msgstr "Bass-ის გაძლიერება"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2671
+msgid "No Bass Boost"
+msgstr "Bass-ის გაძლიერების გარეშე"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2672
+#: spa/plugins/bluez5/bluez5-device.c:1335
+msgid "Speaker"
+msgstr "დინამიკი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2673
+#: spa/plugins/alsa/acp/alsa-mixer.c:2751
+msgid "Headphones"
+msgstr "ყურსაცვამები"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2740
+msgid "Analog Input"
+msgstr "ანალოგური შეყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2744
+msgid "Dock Microphone"
+msgstr "მისამაგრებელი მიკროფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2746
+msgid "Headset Microphone"
+msgstr "ყურსაცვამის მიროფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2750
+msgid "Analog Output"
+msgstr "ანალოგური გამოტანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2752
+msgid "Headphones 2"
+msgstr "ყურსაცვამები 2"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2753
+msgid "Headphones Mono Output"
+msgstr "ყურსაცვამები მონო"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2754
+msgid "Line Out"
+msgstr "ხაზოვანი გამოყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2755
+msgid "Analog Mono Output"
+msgstr "ანალოგური მონო გამოყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2756
+msgid "Speakers"
+msgstr "დინამიკები"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2757
+msgid "HDMI / DisplayPort"
+msgstr "HDMI / DisplayPort"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2758
+msgid "Digital Output (S/PDIF)"
+msgstr "ციფრული გამოყვანა (S/PDIF)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2759
+msgid "Digital Input (S/PDIF)"
+msgstr "ციფრული შეტანა (S/PDIF)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2760
+msgid "Multichannel Input"
+msgstr "მრავალარხიანი შეყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2761
+msgid "Multichannel Output"
+msgstr "მრავალარხიანი გამოყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2762
+msgid "Game Output"
+msgstr "თამაშის გამოყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2763
+#: spa/plugins/alsa/acp/alsa-mixer.c:2764
+msgid "Chat Output"
+msgstr "ჩატის გამოყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2765
+msgid "Chat Input"
+msgstr "ჩატის შეყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:2766
+msgid "Virtual Surround 7.1"
+msgstr "ვირტუალური სივრცითი ხმა 7.1"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4471
+msgid "Analog Mono"
+msgstr "ანალოგური მონო"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4472
+msgid "Analog Mono (Left)"
+msgstr "ანალოგური მონო (მარცხენა)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4473
+msgid "Analog Mono (Right)"
+msgstr "ანალოგური მონო (მარჯვენა)"
+
+#. Note: Not translated to "Analog Stereo Input", because the source
+#. * name gets "Input" appended to it automatically, so adding "Input"
+#. * here would lead to the source name to become "Analog Stereo Input
+#. * Input". The same logic applies to analog-stereo-output,
+#. * multichannel-input and multichannel-output.
+#: spa/plugins/alsa/acp/alsa-mixer.c:4474
+#: spa/plugins/alsa/acp/alsa-mixer.c:4482
+#: spa/plugins/alsa/acp/alsa-mixer.c:4483
+msgid "Analog Stereo"
+msgstr "ანალოგური სტერეო"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4475
+msgid "Mono"
+msgstr "მონო"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4476
+msgid "Stereo"
+msgstr "სტერეო"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4484
+#: spa/plugins/alsa/acp/alsa-mixer.c:4642
+#: spa/plugins/bluez5/bluez5-device.c:1320
+msgid "Headset"
+msgstr "ყურსაცვამები & მიკროფონი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4485
+#: spa/plugins/alsa/acp/alsa-mixer.c:4643
+msgid "Speakerphone"
+msgstr "სამაგიდო დინამიკი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4486
+#: spa/plugins/alsa/acp/alsa-mixer.c:4487
+msgid "Multichannel"
+msgstr "მრავალარხიანი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4488
+msgid "Analog Surround 2.1"
+msgstr "ანალოგური სივრცითი 2.1"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4489
+msgid "Analog Surround 3.0"
+msgstr "ანალოგური სივრცითი 3.0"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4490
+msgid "Analog Surround 3.1"
+msgstr "ანალოგური სივრცითი 3.1"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4491
+msgid "Analog Surround 4.0"
+msgstr "ანალოგური სივრცითი 4.0"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4492
+msgid "Analog Surround 4.1"
+msgstr "ანალოგური სივრცითი 4.1"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4493
+msgid "Analog Surround 5.0"
+msgstr "ანალოგური სივრცითი 5.0"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4494
+msgid "Analog Surround 5.1"
+msgstr "ანალოგური სივრცითი 5.1"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4495
+msgid "Analog Surround 6.0"
+msgstr "ანალოგური სივრცითი 6.0"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4496
+msgid "Analog Surround 6.1"
+msgstr "ანალოგური სივრცითი 6.1"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4497
+msgid "Analog Surround 7.0"
+msgstr "ანალოგური სივრცითი 7.0"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4498
+msgid "Analog Surround 7.1"
+msgstr "ანალოგური სივრცითი 7.1"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4499
+msgid "Digital Stereo (IEC958)"
+msgstr "ციფრული სტერეო (IEC958)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4500
+msgid "Digital Surround 4.0 (IEC958/AC3)"
+msgstr "ციფრული სივრცითი 4.0 (IEC958/AC3)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4501
+msgid "Digital Surround 5.1 (IEC958/AC3)"
+msgstr "ციფრული სივრცითი 5.1 (IEC958/AC3)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4502
+msgid "Digital Surround 5.1 (IEC958/DTS)"
+msgstr "ციფრული სივრცითი 5.1 (IEC958/DTS)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4503
+msgid "Digital Stereo (HDMI)"
+msgstr "ციფრული სტერეო (HDMI)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4504
+msgid "Digital Surround 5.1 (HDMI)"
+msgstr "ციფრული სივრცითი 5.1 (HDMI)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4505
+msgid "Chat"
+msgstr "ჩატი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4506
+msgid "Game"
+msgstr "თამაში"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4640
+msgid "Analog Mono Duplex"
+msgstr "ანალოგური მონო დუპლექსი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4641
+msgid "Analog Stereo Duplex"
+msgstr "ანალოგური სტერეო დუპლექსი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4644
+msgid "Digital Stereo Duplex (IEC958)"
+msgstr "ციფრული სტერეო დუპლექსი (IEC958)"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4645
+msgid "Multichannel Duplex"
+msgstr "მრავალარხიანი დუპლექსი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4646
+msgid "Stereo Duplex"
+msgstr "სტერეო დუპლექსი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4647
+msgid "Mono Chat + 7.1 Surround"
+msgstr "მონო ჩატი + 7.1 სივრცითი"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4754
+#, c-format
+msgid "%s Output"
+msgstr "%s გამოყვანა"
+
+#: spa/plugins/alsa/acp/alsa-mixer.c:4761
+#, c-format
+msgid "%s Input"
+msgstr "%s შეყვანა"
+
+#: spa/plugins/alsa/acp/alsa-util.c:1173 spa/plugins/alsa/acp/alsa-util.c:1267
+#, c-format
+msgid ""
+"snd_pcm_avail() returned a value that is exceptionally large: %lu byte (%lu "
+"ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
+"to the ALSA developers."
+msgid_plural ""
+"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu "
+"ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
+"to the ALSA developers."
+msgstr0 ""
+"snd_pcm_avail()-ის მიერ დაბრუნებული მნიშვნელობა არაჩვეულებრივად დიდია: %lu "
+"ბაიტი (%lu მწმ).\n"
+"ყველაზე ხშირად ეს ALSA-ს დრაივერის (%s) შეცდომის გამო ხდება. დაუკავშირდით "
+"ALSA-ის პროგრამისტებს."
+msgstr1 ""
+"snd_pcm_avail()-ის მიერ დაბრუნებული მნიშვნელობა არაჩვეულებრივად დიდია: %lu "
+"ბაიტი (%lu მწმ).\n"
+"ყველაზე ხშირად ეს ALSA-ს დრაივერის (%s) შეცდომის გამო ხდება. დაუკავშირდით "
+"ALSA-ის პროგრამისტებს."
+
+#: spa/plugins/alsa/acp/alsa-util.c:1239
+#, c-format
+msgid ""
+"snd_pcm_delay() returned a value that is exceptionally large: %li byte (%s"
+"%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
+"to the ALSA developers."
+msgid_plural ""
+"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s"
+"%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
+"to the ALSA developers."
+msgstr0 ""
+"snd_pcm_delay()-ის მიერ დაბრუნებული მნიშვნელობა არაჩვეულებრივად დიდია: %li "
+"ბაიტი (%s%lu მწმ).\n"
+"ყველაზე ხშირად ეს ALSA-ს დრაივერის (%s) შეცდომის გამო ხდება. დაუკავშირდით "
+"ALSA-ის პროგრამისტებს."
+msgstr1 ""
+"snd_pcm_delay()-ის მიერ დაბრუნებული მნიშვნელობა არაჩვეულებრივად დიდია: %li "
+"ბაიტი (%s%lu მწმ).\n"
+"ყველაზე ხშირად ეს ALSA-ს დრაივერის (%s) შეცდომის გამო ხდება. დაუკავშირდით "
+"ALSA-ის პროგრამისტებს."
+
+#: spa/plugins/alsa/acp/alsa-util.c:1286
+#, c-format
+msgid ""
+"snd_pcm_avail_delay() returned strange values: delay %lu is less than avail "
+"%lu.\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
+"to the ALSA developers."
+msgstr ""
+"snd_pcm_avail_delay()-ის მიერ დაბრუნებული მნიშვნელობები უცნაურია: დაყოვნება "
+"%lu უფრო მცირეა, ვიდრე ხელმისაწვდომი დრო %lu.\n"
+"ყველაზე ხშირად ეს ALSA-ს დრაივერის (%s) შეცდომის გამო ხდება. დაუკავშირდით "
+"ALSA-ის პროგრამისტებს."
+
+#: spa/plugins/alsa/acp/alsa-util.c:1329
+#, c-format
+msgid ""
+"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu byte "
+"(%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
+"to the ALSA developers."
+msgid_plural ""
+"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes "
+"(%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
+"to the ALSA developers."
+msgstr0 ""
+"snd_pcm_mmap_begin()-ის მიერ დაბრუნებული მნიშვნელობა არაჩვეულებრივად დიდია: "
+"%lu ბაიტი (%lu მწმ).\n"
+"ყველაზე ხშირად ეს ALSA-ს დრაივერის (%s) შეცდომის გამო ხდება. დაუკავშირდით "
+"ALSA-ის პროგრამისტებს."
+msgstr1 ""
+"snd_pcm_mmap_begin()-ის მიერ დაბრუნებული მნიშვნელობა არაჩვეულებრივად დიდია: "
+"%lu ბაიტი (%lu მწმ).\n"
+"ყველაზე ხშირად ეს ALSA-ს დრაივერის (%s) შეცდომის გამო ხდება. დაუკავშირდით "
+"ALSA-ის პროგრამისტებს."
+
+#: spa/plugins/alsa/acp/channelmap.h:457
+msgid "(invalid)"
+msgstr "(არასწორი)"
+
+#: spa/plugins/alsa/acp/compat.c:189
+msgid "Built-in Audio"
+msgstr "ჩაშენებული აუდიო"
+
+#: spa/plugins/alsa/acp/compat.c:194
+msgid "Modem"
+msgstr "მოდემი"
+
+#: spa/plugins/bluez5/bluez5-device.c:1172
+msgid "Audio Gateway (A2DP Source & HSP/HFP AG)"
+msgstr "Audio Gateway (A2DP წყარო & HSP/HFP AG)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1197
+#, c-format
+msgid "High Fidelity Playback (A2DP Sink, codec %s)"
+msgstr "მაღალი ხარისხის ხმა (A2DP Sink, კოდეკი %s)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1200
+#, c-format
+msgid "High Fidelity Duplex (A2DP Source/Sink, codec %s)"
+msgstr "მაღალი ხარისხის დუპლექსი (A2DP წყარო/Sink, კოდეკი %s)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1208
+msgid "High Fidelity Playback (A2DP Sink)"
+msgstr "მაღალი ხარისხის ხმა (A2DP Sink)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1210
+msgid "High Fidelity Duplex (A2DP Source/Sink)"
+msgstr "მაღალი ხარისხის დუპლექსი(A2DP წყარო/Sink)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1238
+#, c-format
+msgid "Headset Head Unit (HSP/HFP, codec %s)"
+msgstr "Headset Head Unit (HSP/HFP, კოდეკი %s)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1243
+msgid "Headset Head Unit (HSP/HFP)"
+msgstr "Headset Head Unit (HSP/HFP)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1325
+msgid "Handsfree"
+msgstr "ხელის გარეშე სამართავი"
+
+#: spa/plugins/bluez5/bluez5-device.c:1340
+msgid "Headphone"
+msgstr "ყურსაცვამი"
+
+#: spa/plugins/bluez5/bluez5-device.c:1345
+msgid "Portable"
+msgstr "გადატანადი"
+
+#: spa/plugins/bluez5/bluez5-device.c:1350
+msgid "Car"
+msgstr "მანქანა"
+
+#: spa/plugins/bluez5/bluez5-device.c:1355
+msgid "HiFi"
+msgstr "HiFi"
+
+#: spa/plugins/bluez5/bluez5-device.c:1360
+msgid "Phone"
+msgstr "ტელეფონი"
+
+#: spa/plugins/bluez5/bluez5-device.c:1366
+msgid "Bluetooth"
+msgstr "Bluetooth"

pipewire-0.3.56.tar.gz/po/pl.po -> pipewire-0.3.57.tar.gz/po/pl.po Changed

@@ -8,8 +8,8 @@
 "Project-Id-Version: pipewire\n"
 "Report-Msgid-Bugs-To: https://gitlab.freedesktop.org/pipewire/pipewire/-/"
 "issues\n"
-"POT-Creation-Date: 2022-05-20 15:26+0000\n"
-"PO-Revision-Date: 2022-05-21 12:49+0200\n"
+"POT-Creation-Date: 2022-08-27 13:57+0000\n"
+"PO-Revision-Date: 2022-08-27 16:00+0200\n"
 "Last-Translator: Piotr Drąg <piotrdrag@gmail.com>\n"
 "Language-Team: Polish <community-poland@mozilla.org>\n"
 "Language: pl\n"
@@ -41,8 +41,8 @@
 msgid "Start the PipeWire Media System"
 msgstr "Uruchomienie systemu multimediów PipeWire"
 
-#: src/modules/module-protocol-pulse/modules/module-tunnel-sink.c:183
-#: src/modules/module-protocol-pulse/modules/module-tunnel-source.c:183
+#: src/modules/module-protocol-pulse/modules/module-tunnel-sink.c:180
+#: src/modules/module-protocol-pulse/modules/module-tunnel-source.c:180
 #, c-format
 msgid "Tunnel to %s/%s"
 msgstr "Tunel do %s/%s"
@@ -51,7 +51,7 @@
 msgid "Dummy Output"
 msgstr "Głuche wyjście"
 
-#: src/modules/module-pulse-tunnel.c:639
+#: src/modules/module-pulse-tunnel.c:648
 #, c-format
 msgid "Tunnel for %s@%s"
 msgstr "Tunel dla %s@%s"
@@ -70,7 +70,7 @@
 msgid "%s on %s"
 msgstr "%s na %s"
 
-#: src/tools/pw-cat.c:872
+#: src/tools/pw-cat.c:784
 #, c-format
 msgid ""
 "%s options <file>|-\n"
@@ -85,7 +85,7 @@
 "  -v, --verbose                         Wyświetla więcej komunikatów\n"
 "\n"
 
-#: src/tools/pw-cat.c:879
+#: src/tools/pw-cat.c:791
 #, c-format
 msgid ""
 "  -R, --remote                          Remote daemon name\n"
@@ -122,7 +122,7 @@
 "  -P  --properties                      Ustawia właściwości węzła\n"
 "\n"
 
-#: src/tools/pw-cat.c:897
+#: src/tools/pw-cat.c:809
 #, c-format
 msgid ""
 "      --rate                            Sample rate (req. for rec) (default "
@@ -158,7 +158,7 @@
 "(domyślnie %d)\n"
 "\n"
 
-#: src/tools/pw-cat.c:914
+#: src/tools/pw-cat.c:826
 msgid ""
 "  -p, --playback                        Playback mode\n"
 "  -r, --record                          Recording mode\n"
@@ -172,7 +172,7 @@
 "  -d, --dsd                             Tryb DSD\n"
 "\n"
 
-#: src/tools/pw-cli.c:3139
+#: src/tools/pw-cli.c:2255
 #, c-format
 msgid ""
 "%s options command\n"
@@ -195,7 +195,7 @@
 msgstr "Dźwięk w zastosowaniach profesjonalnych"
 
 #: spa/plugins/alsa/acp/acp.c:444 spa/plugins/alsa/acp/alsa-mixer.c:4648
-#: spa/plugins/bluez5/bluez5-device.c:1161
+#: spa/plugins/bluez5/bluez5-device.c:1188
 msgid "Off"
 msgstr "Wyłączone"
 
@@ -222,7 +222,7 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2657
 #: spa/plugins/alsa/acp/alsa-mixer.c:2741
-#: spa/plugins/bluez5/bluez5-device.c:1330
+#: spa/plugins/bluez5/bluez5-device.c:1360
 msgid "Microphone"
 msgstr "Mikrofon"
 
@@ -288,7 +288,7 @@
 msgstr "Brak podbicia basów"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2672
-#: spa/plugins/bluez5/bluez5-device.c:1335
+#: spa/plugins/bluez5/bluez5-device.c:1366
 msgid "Speaker"
 msgstr "Głośnik"
 
@@ -403,7 +403,7 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4484
 #: spa/plugins/alsa/acp/alsa-mixer.c:4642
-#: spa/plugins/bluez5/bluez5-device.c:1320
+#: spa/plugins/bluez5/bluez5-device.c:1348
 msgid "Headset"
 msgstr "Słuchawki z mikrofonem"
 
@@ -527,7 +527,7 @@
 msgid "%s Input"
 msgstr "Wejście %s"
 
-#: spa/plugins/alsa/acp/alsa-util.c:1173 spa/plugins/alsa/acp/alsa-util.c:1267
+#: spa/plugins/alsa/acp/alsa-util.c:1187 spa/plugins/alsa/acp/alsa-util.c:1281
 #, c-format
 msgid ""
 "snd_pcm_avail() returned a value that is exceptionally large: %lu byte (%lu "
@@ -552,7 +552,7 @@
 "Prawdopodobnie jest to błąd sterownika ALSA „%s”. Proszę zgłosić ten problem "
 "programistom usługi ALSA."
 
-#: spa/plugins/alsa/acp/alsa-util.c:1239
+#: spa/plugins/alsa/acp/alsa-util.c:1253
 #, c-format
 msgid ""
 "snd_pcm_delay() returned a value that is exceptionally large: %li byte (%s"
@@ -577,7 +577,7 @@
 "Prawdopodobnie jest to błąd sterownika ALSA „%s”. Proszę zgłosić ten problem "
 "programistom usługi ALSA."
 
-#: spa/plugins/alsa/acp/alsa-util.c:1286
+#: spa/plugins/alsa/acp/alsa-util.c:1300
 #, c-format
 msgid ""
 "snd_pcm_avail_delay() returned strange values: delay %lu is less than avail "
@@ -590,7 +590,7 @@
 "Prawdopodobnie jest to błąd sterownika ALSA „%s”. Proszę zgłosić ten problem "
 "programistom usługi ALSA."
 
-#: spa/plugins/alsa/acp/alsa-util.c:1329
+#: spa/plugins/alsa/acp/alsa-util.c:1343
 #, c-format
 msgid ""
 "snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu byte "
@@ -615,7 +615,7 @@
 "Prawdopodobnie jest to błąd sterownika ALSA „%s”. Proszę zgłosić ten problem "
 "programistom usługi ALSA."
 
-#: spa/plugins/alsa/acp/channelmap.h:464
+#: spa/plugins/alsa/acp/channelmap.h:457
 msgid "(invalid)"
 msgstr "(nieprawidłowe)"
 
@@ -627,61 +627,77 @@
 msgid "Modem"
 msgstr "Modem"
 
-#: spa/plugins/bluez5/bluez5-device.c:1172
+#: spa/plugins/bluez5/bluez5-device.c:1199
 msgid "Audio Gateway (A2DP Source & HSP/HFP AG)"
 msgstr "Bramka dźwięku (źródło A2DP i AG HSP/HFP)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1197
+#: spa/plugins/bluez5/bluez5-device.c:1224
 #, c-format
 msgid "High Fidelity Playback (A2DP Sink, codec %s)"
 msgstr "Odtwarzanie o wysokiej dokładności (odpływ A2DP, kodek %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1200
+#: spa/plugins/bluez5/bluez5-device.c:1227
 #, c-format
 msgid "High Fidelity Duplex (A2DP Source/Sink, codec %s)"
 msgstr "Dupleks o wysokiej dokładności (źródło/odpływ A2DP, kodek %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1208
+#: spa/plugins/bluez5/bluez5-device.c:1235
 msgid "High Fidelity Playback (A2DP Sink)"
 msgstr "Odtwarzanie o wysokiej dokładności (odpływ A2DP)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1210
+#: spa/plugins/bluez5/bluez5-device.c:1237
 msgid "High Fidelity Duplex (A2DP Source/Sink)"
 msgstr "Dupleks o wysokiej dokładności (źródło/odpływ A2DP)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1238
+#: spa/plugins/bluez5/bluez5-device.c:1265
 #, c-format
 msgid "Headset Head Unit (HSP/HFP, codec %s)"
 msgstr "Jednostka główna słuchawek z mikrofonem (HSP/HFP, kodek %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1243
+#: spa/plugins/bluez5/bluez5-device.c:1270
 msgid "Headset Head Unit (HSP/HFP)"
 msgstr "Jednostka główna słuchawek z mikrofonem (HSP/HFP)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1325
+#: spa/plugins/bluez5/bluez5-device.c:1349
+#: spa/plugins/bluez5/bluez5-device.c:1354
+#: spa/plugins/bluez5/bluez5-device.c:1361
+#: spa/plugins/bluez5/bluez5-device.c:1367
+#: spa/plugins/bluez5/bluez5-device.c:1373
+#: spa/plugins/bluez5/bluez5-device.c:1379
+#: spa/plugins/bluez5/bluez5-device.c:1385
+#: spa/plugins/bluez5/bluez5-device.c:1391
+#: spa/plugins/bluez5/bluez5-device.c:1397
 msgid "Handsfree"
 msgstr "Zestaw głośnomówiący"
 
-#: spa/plugins/bluez5/bluez5-device.c:1340
+#: spa/plugins/bluez5/bluez5-device.c:1355
+msgid "Handsfree (HFP)"
+msgstr "Zestaw głośnomówiący (HFP)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1372
 msgid "Headphone"
 msgstr "Słuchawki"
 
-#: spa/plugins/bluez5/bluez5-device.c:1345
+#: spa/plugins/bluez5/bluez5-device.c:1378
 msgid "Portable"
 msgstr "Przenośne"
 
-#: spa/plugins/bluez5/bluez5-device.c:1350
+#: spa/plugins/bluez5/bluez5-device.c:1384
 msgid "Car"
 msgstr "Samochód"
 
-#: spa/plugins/bluez5/bluez5-device.c:1355
+#: spa/plugins/bluez5/bluez5-device.c:1390
 msgid "HiFi"
 msgstr "HiFi"
 
-#: spa/plugins/bluez5/bluez5-device.c:1360
+#: spa/plugins/bluez5/bluez5-device.c:1396
 msgid "Phone"
 msgstr "Telefon"
 
-#: spa/plugins/bluez5/bluez5-device.c:1366
+#: spa/plugins/bluez5/bluez5-device.c:1403
 msgid "Bluetooth"
 msgstr "Bluetooth"
+
+#: spa/plugins/bluez5/bluez5-device.c:1404
+msgid "Bluetooth (HFP)"
+msgstr "Bluetooth (HFP)"

pipewire-0.3.56.tar.gz/po/sv.po -> pipewire-0.3.57.tar.gz/po/sv.po Changed

@@ -19,8 +19,8 @@
 "Project-Id-Version: pipewire\n"
 "Report-Msgid-Bugs-To: https://gitlab.freedesktop.org/pipewire/pipewire/-/"
 "issues\n"
-"POT-Creation-Date: 2022-05-20 15:26+0000\n"
-"PO-Revision-Date: 2022-05-23 11:01+0200\n"
+"POT-Creation-Date: 2022-07-19 15:27+0000\n"
+"PO-Revision-Date: 2022-07-10 10:22+0200\n"
 "Last-Translator: Anders Jonsson <anders.jonsson@norsjovallen.se>\n"
 "Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
 "Language: sv\n"
@@ -28,7 +28,7 @@
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Poedit 3.0.1\n"
+"X-Generator: Poedit 3.1\n"
 
 #: src/daemon/pipewire.c:46
 #, c-format
@@ -51,8 +51,8 @@
 msgid "Start the PipeWire Media System"
 msgstr "Starta mediasystemet PipeWire"
 
-#: src/modules/module-protocol-pulse/modules/module-tunnel-sink.c:183
-#: src/modules/module-protocol-pulse/modules/module-tunnel-source.c:183
+#: src/modules/module-protocol-pulse/modules/module-tunnel-sink.c:180
+#: src/modules/module-protocol-pulse/modules/module-tunnel-source.c:180
 #, c-format
 msgid "Tunnel to %s/%s"
 msgstr "Tunnel till %s/%s"
@@ -61,7 +61,7 @@
 msgid "Dummy Output"
 msgstr "Attrapputgång"
 
-#: src/modules/module-pulse-tunnel.c:639
+#: src/modules/module-pulse-tunnel.c:648
 #, c-format
 msgid "Tunnel for %s@%s"
 msgstr "Tunnel för %s@%s"
@@ -80,7 +80,7 @@
 msgid "%s on %s"
 msgstr "%s på %s"
 
-#: src/tools/pw-cat.c:872
+#: src/tools/pw-cat.c:784
 #, c-format
 msgid ""
 "%s options <file>|-\n"
@@ -95,7 +95,7 @@
 "  -v, --verbose                         Aktivera utförliga operationer\n"
 "\n"
 
-#: src/tools/pw-cat.c:879
+#: src/tools/pw-cat.c:791
 #, c-format
 msgid ""
 "  -R, --remote                          Remote daemon name\n"
@@ -125,7 +125,7 @@
 "  -P  --properties                      Sätt nodegenskaper\n"
 "\n"
 
-#: src/tools/pw-cat.c:897
+#: src/tools/pw-cat.c:809
 #, c-format
 msgid ""
 "      --rate                            Sample rate (req. for rec) (default "
@@ -160,7 +160,7 @@
 "%d)\n"
 "\n"
 
-#: src/tools/pw-cat.c:914
+#: src/tools/pw-cat.c:826
 msgid ""
 "  -p, --playback                        Playback mode\n"
 "  -r, --record                          Recording mode\n"
@@ -174,7 +174,7 @@
 "  -d, --dsd                             DSD-läge\n"
 "\n"
 
-#: src/tools/pw-cli.c:3139
+#: src/tools/pw-cli.c:3165
 #, c-format
 msgid ""
 "%s options command\n"
@@ -195,8 +195,8 @@
 msgid "Pro Audio"
 msgstr "Professionellt ljud"
 
-#: spa/plugins/alsa/acp/acp.c:444 spa/plugins/alsa/acp/alsa-mixer.c:4648
-#: spa/plugins/bluez5/bluez5-device.c:1161
+#: spa/plugins/alsa/acp/acp.c:446 spa/plugins/alsa/acp/alsa-mixer.c:4648
+#: spa/plugins/bluez5/bluez5-device.c:1188
 msgid "Off"
 msgstr "Av"
 
@@ -223,7 +223,7 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2657
 #: spa/plugins/alsa/acp/alsa-mixer.c:2741
-#: spa/plugins/bluez5/bluez5-device.c:1330
+#: spa/plugins/bluez5/bluez5-device.c:1360
 msgid "Microphone"
 msgstr "Mikrofon"
 
@@ -289,7 +289,7 @@
 msgstr "Ingen basökning"
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:2672
-#: spa/plugins/bluez5/bluez5-device.c:1335
+#: spa/plugins/bluez5/bluez5-device.c:1366
 msgid "Speaker"
 msgstr "Högtalare"
 
@@ -404,7 +404,7 @@
 
 #: spa/plugins/alsa/acp/alsa-mixer.c:4484
 #: spa/plugins/alsa/acp/alsa-mixer.c:4642
-#: spa/plugins/bluez5/bluez5-device.c:1320
+#: spa/plugins/bluez5/bluez5-device.c:1348
 msgid "Headset"
 msgstr "Headset"
 
@@ -554,13 +554,13 @@
 #: spa/plugins/alsa/acp/alsa-util.c:1239
 #, c-format
 msgid ""
-"snd_pcm_delay() returned a value that is exceptionally large: %li byte "
-"(%s%lu ms).\n"
+"snd_pcm_delay() returned a value that is exceptionally large: %li byte (%s"
+"%lu ms).\n"
 "Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
 "to the ALSA developers."
 msgid_plural ""
-"snd_pcm_delay() returned a value that is exceptionally large: %li bytes "
-"(%s%lu ms).\n"
+"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s"
+"%lu ms).\n"
 "Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
 "to the ALSA developers."
 msgstr0 ""
@@ -610,7 +610,7 @@
 "Förmodligen är detta ett fel i ALSA-drivrutinen ”%s”. Vänligen rapportera "
 "problemet till ALSA-utvecklarna."
 
-#: spa/plugins/alsa/acp/channelmap.h:464
+#: spa/plugins/alsa/acp/channelmap.h:457
 msgid "(invalid)"
 msgstr "(ogiltig)"
 
@@ -622,61 +622,77 @@
 msgid "Modem"
 msgstr "Modem"
 
-#: spa/plugins/bluez5/bluez5-device.c:1172
+#: spa/plugins/bluez5/bluez5-device.c:1199
 msgid "Audio Gateway (A2DP Source & HSP/HFP AG)"
 msgstr "Audio gateway (A2DP-källa & HSP/HFP AG)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1197
+#: spa/plugins/bluez5/bluez5-device.c:1224
 #, c-format
 msgid "High Fidelity Playback (A2DP Sink, codec %s)"
 msgstr "High fidelity-uppspelning (A2DP-utgång, kodek %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1200
+#: spa/plugins/bluez5/bluez5-device.c:1227
 #, c-format
 msgid "High Fidelity Duplex (A2DP Source/Sink, codec %s)"
 msgstr "High fidelity duplex (A2DP-källa/utgång, kodek %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1208
+#: spa/plugins/bluez5/bluez5-device.c:1235
 msgid "High Fidelity Playback (A2DP Sink)"
 msgstr "High fidelity-uppspelning (A2DP-utgång)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1210
+#: spa/plugins/bluez5/bluez5-device.c:1237
 msgid "High Fidelity Duplex (A2DP Source/Sink)"
 msgstr "High fidelity duplex (A2DP-källa/utgång)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1238
+#: spa/plugins/bluez5/bluez5-device.c:1265
 #, c-format
 msgid "Headset Head Unit (HSP/HFP, codec %s)"
 msgstr "Headset-huvudenhet (HSP/HFP, kodek %s)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1243
+#: spa/plugins/bluez5/bluez5-device.c:1270
 msgid "Headset Head Unit (HSP/HFP)"
 msgstr "Headset-huvudenhet (HSP/HFP)"
 
-#: spa/plugins/bluez5/bluez5-device.c:1325
+#: spa/plugins/bluez5/bluez5-device.c:1349
+#: spa/plugins/bluez5/bluez5-device.c:1354
+#: spa/plugins/bluez5/bluez5-device.c:1361
+#: spa/plugins/bluez5/bluez5-device.c:1367
+#: spa/plugins/bluez5/bluez5-device.c:1373
+#: spa/plugins/bluez5/bluez5-device.c:1379
+#: spa/plugins/bluez5/bluez5-device.c:1385
+#: spa/plugins/bluez5/bluez5-device.c:1391
+#: spa/plugins/bluez5/bluez5-device.c:1397
 msgid "Handsfree"
 msgstr "Handsfree"
 
-#: spa/plugins/bluez5/bluez5-device.c:1340
+#: spa/plugins/bluez5/bluez5-device.c:1355
+msgid "Handsfree (HFP)"
+msgstr "Handsfree (HFP)"
+
+#: spa/plugins/bluez5/bluez5-device.c:1372
 msgid "Headphone"
 msgstr "Hörlurar"
 
-#: spa/plugins/bluez5/bluez5-device.c:1345
+#: spa/plugins/bluez5/bluez5-device.c:1378
 msgid "Portable"
 msgstr "Bärbar"
 
-#: spa/plugins/bluez5/bluez5-device.c:1350
+#: spa/plugins/bluez5/bluez5-device.c:1384
 msgid "Car"
 msgstr "Bil"
 
-#: spa/plugins/bluez5/bluez5-device.c:1355
+#: spa/plugins/bluez5/bluez5-device.c:1390
 msgid "HiFi"
 msgstr "HiFi"
 
-#: spa/plugins/bluez5/bluez5-device.c:1360
+#: spa/plugins/bluez5/bluez5-device.c:1396
 msgid "Phone"
 msgstr "Telefon"
 
-#: spa/plugins/bluez5/bluez5-device.c:1366
+#: spa/plugins/bluez5/bluez5-device.c:1403
 msgid "Bluetooth"
 msgstr "Bluetooth"
+
+#: spa/plugins/bluez5/bluez5-device.c:1404
+msgid "Bluetooth (HFP)"
+msgstr "Bluetooth (HFP)"

pipewire-0.3.56.tar.gz/spa/include/spa/interfaces/audio/aec.h -> pipewire-0.3.57.tar.gz/spa/include/spa/interfaces/audio/aec.h Changed

pipewire-0.3.56.tar.gz/spa/include/spa/param/bluetooth/audio.h -> pipewire-0.3.57.tar.gz/spa/include/spa/param/bluetooth/audio.h Changed

pipewire-0.3.56.tar.gz/spa/include/spa/param/bluetooth/type-info.h -> pipewire-0.3.57.tar.gz/spa/include/spa/param/bluetooth/type-info.h Changed

@@ -53,6 +53,11 @@
 	{ SPA_BLUETOOTH_AUDIO_CODEC_FASTSTREAM, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "faststream", NULL },
 	{ SPA_BLUETOOTH_AUDIO_CODEC_FASTSTREAM_DUPLEX, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "faststream_duplex", NULL },
 	{ SPA_BLUETOOTH_AUDIO_CODEC_LC3PLUS_HR, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "lc3plus_hr", NULL },
+	{ SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "opus_05", NULL },
+	{ SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_51, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "opus_05_51", NULL },
+	{ SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_71, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "opus_05_71", NULL },
+	{ SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_DUPLEX, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "opus_05_duplex", NULL },
+	{ SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "opus_05_pro", NULL },
 
 	{ SPA_BLUETOOTH_AUDIO_CODEC_CVSD, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "cvsd", NULL },
 	{ SPA_BLUETOOTH_AUDIO_CODEC_MSBC, SPA_TYPE_Int, SPA_TYPE_INFO_BLUETOOTH_AUDIO_CODEC_BASE "msbc", NULL },

pipewire-0.3.56.tar.gz/spa/include/spa/utils/defs.h -> pipewire-0.3.57.tar.gz/spa/include/spa/utils/defs.h Changed

pipewire-0.3.56.tar.gz/spa/include/spa/utils/hook.h -> pipewire-0.3.57.tar.gz/spa/include/spa/utils/hook.h Changed

pipewire-0.3.56.tar.gz/spa/include/spa/utils/list.h -> pipewire-0.3.57.tar.gz/spa/include/spa/utils/list.h Changed

pipewire-0.3.56.tar.gz/spa/meson.build -> pipewire-0.3.57.tar.gz/spa/meson.build Changed

pipewire-0.3.56.tar.gz/spa/plugins/aec/aec-null.c -> pipewire-0.3.57.tar.gz/spa/plugins/aec/aec-null.c Changed

@@ -58,19 +58,18 @@
 	return 0;
 }
 
-static struct spa_audio_aec_methods impl_aec = {
+static const struct spa_audio_aec_methods impl_aec = {
+	SPA_VERSION_AUDIO_AEC,
 	.init = null_init,
 	.run = null_run,
 };
 
 static int impl_get_interface(struct spa_handle *handle, const char *type, void **interface)
 {
-	struct impl *impl;
-
 	spa_return_val_if_fail(handle != NULL, -EINVAL);
 	spa_return_val_if_fail(interface != NULL, -EINVAL);
 
-	impl = (struct impl *) handle;
+	struct impl *impl = (struct impl *) handle;
 
 	if (spa_streq(type, SPA_TYPE_INTERFACE_AUDIO_AEC))
 		*interface = &impl->aec;
@@ -101,15 +100,13 @@
 	  const struct spa_support *support,
 	  uint32_t n_support)
 {
-	struct impl *impl;
-
 	spa_return_val_if_fail(factory != NULL, -EINVAL);
 	spa_return_val_if_fail(handle != NULL, -EINVAL);
 
 	handle->get_interface = impl_get_interface;
 	handle->clear = impl_clear;
 
-	impl = (struct impl *) handle;
+	struct impl *impl = (struct impl *) handle;
 
 	impl->aec.iface = SPA_INTERFACE_INIT(
 		SPA_TYPE_INTERFACE_AUDIO_AEC,
@@ -119,7 +116,7 @@
 	impl->aec.info = NULL;
 	impl->aec.latency = NULL;
 
-	impl->log = (struct spa_log*)spa_support_find(support, n_support, SPA_TYPE_INTERFACE_Log);
+	impl->log = spa_support_find(support, n_support, SPA_TYPE_INTERFACE_Log);
 	spa_log_topic_init(impl->log, &log_topic);
 
 	spa_hook_list_init(&impl->hooks_list);
@@ -151,7 +148,7 @@
 	return 1;
 }
 
-const struct spa_handle_factory spa_aec_null_factory = {
+static const struct spa_handle_factory spa_aec_null_factory = {
 	SPA_VERSION_HANDLE_FACTORY,
 	SPA_NAME_AEC,
 	NULL,
@@ -160,7 +157,6 @@
 	impl_enum_interface_info,
 };
 
-
 SPA_EXPORT
 int spa_handle_factory_enum(const struct spa_handle_factory **factory, uint32_t *index)
 {

pipewire-0.3.56.tar.gz/spa/plugins/aec/aec-webrtc.cpp -> pipewire-0.3.57.tar.gz/spa/plugins/aec/aec-webrtc.cpp Changed

@@ -50,19 +50,17 @@
 #undef SPA_LOG_TOPIC_DEFAULT
 #define SPA_LOG_TOPIC_DEFAULT &log_topic
 
-static bool webrtc_get_spa_bool(const struct spa_dict *args, const char *key, bool default_value) {
-	const char *str_val;
-	bool value = default_value;
-	str_val = spa_dict_lookup(args, key);
-	if (str_val != NULL)
-		value =spa_atob(str_val);
-
-	return value;
+static bool webrtc_get_spa_bool(const struct spa_dict *args, const char *key, bool default_value)
+{
+	if (auto str = spa_dict_lookup(args, key))
+		return spa_atob(str);
+
+	return default_value;
 }
 
-static int webrtc_init(void *data, const struct spa_dict *args, const struct spa_audio_info_raw *info)
+static int webrtc_init(void *object, const struct spa_dict *args, const struct spa_audio_info_raw *info)
 {
-	auto impl = reinterpret_cast<struct impl_data*>(data);
+	auto impl = static_cast<struct impl_data*>(object);
 
 	bool extended_filter = webrtc_get_spa_bool(args, "webrtc.extended_filter", true);
 	bool delay_agnostic = webrtc_get_spa_bool(args, "webrtc.delay_agnostic", true);
@@ -122,9 +120,9 @@
 	return 0;
 }
 
-static int webrtc_run(void *data, const float *rec, const float *play, float *out, uint32_t n_samples)
+static int webrtc_run(void *object, const float *rec, const float *play, float *out, uint32_t n_samples)
 {
-	auto impl = reinterpret_cast<struct impl_data*>(data);
+	auto impl = static_cast<struct impl_data*>(object);
 	webrtc::StreamConfig config =
 		webrtc::StreamConfig(impl->info.rate, impl->info.channels, false);
 	unsigned int num_blocks = n_samples * 1000 / impl->info.rate / 10;
@@ -160,7 +158,7 @@
 	return 0;
 }
 
-static struct spa_audio_aec_methods impl_aec = {
+static const struct spa_audio_aec_methods impl_aec = {
 	SPA_VERSION_AUDIO_AEC_METHODS,
 	.add_listener = NULL,
 	.init = webrtc_init,
@@ -220,7 +218,7 @@
 	impl->aec.info = NULL;
 	impl->aec.latency = "480/48000",
 
-	impl->log = (struct spa_log*)spa_support_find(support, n_support, SPA_TYPE_INTERFACE_Log);
+	impl->log = static_cast<struct spa_log *>(spa_support_find(support, n_support, SPA_TYPE_INTERFACE_Log));
 	spa_log_topic_init(impl->log, &log_topic);
 
 	return 0;
@@ -250,7 +248,7 @@
 	return 1;
 }
 
-const struct spa_handle_factory spa_aec_webrtc_factory = {
+static const struct spa_handle_factory spa_aec_webrtc_factory = {
 	SPA_VERSION_HANDLE_FACTORY,
 	SPA_NAME_AEC,
 	NULL,
@@ -259,7 +257,6 @@
 	impl_enum_interface_info,
 };
 
-
 SPA_EXPORT
 int spa_handle_factory_enum(const struct spa_handle_factory **factory, uint32_t *index)
 {

pipewire-0.3.56.tar.gz/spa/plugins/alsa/acp/acp.c -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/acp/acp.c Changed

@@ -382,8 +382,7 @@
 							0, NULL, NULL, false))) {
 				pa_alsa_init_proplist_pcm(NULL, m->output_proplist, m->output_pcm);
 				pa_proplist_setf(m->output_proplist, "clock.name", "api.alsa.%u", index);
-				snd_pcm_close(m->output_pcm);
-				m->output_pcm = NULL;
+				pa_alsa_close(&m->output_pcm);
 				m->supported = true;
 				pa_channel_map_init_auto(&m->channel_map, m->sample_spec.channels, PA_CHANNEL_MAP_AUX);
 			}
@@ -413,8 +412,7 @@
 							0, NULL, NULL, false))) {
 				pa_alsa_init_proplist_pcm(NULL, m->input_proplist, m->input_pcm);
 				pa_proplist_setf(m->input_proplist, "clock.name", "api.alsa.%u", index);
-				snd_pcm_close(m->input_pcm);
-				m->input_pcm = NULL;
+				pa_alsa_close(&m->input_pcm);
 				m->supported = true;
 				pa_channel_map_init_auto(&m->channel_map, m->sample_spec.channels, PA_CHANNEL_MAP_AUX);
 			}
@@ -1058,6 +1056,9 @@
 	uint32_t i;
 	int res;
 
+	if (!dev->mixer_handle)
+		return 0;
+
 	if ((res = pa_alsa_path_get_volume(dev->mixer_path, dev->mixer_handle, &dev->mapping->channel_map, &r)) < 0)
 		return res;
 
@@ -1089,6 +1090,9 @@
 
 	dev->real_volume = *v;
 
+	if (!dev->mixer_handle)
+		return;
+
 	/* Shift up by the base volume */
 	pa_sw_cvolume_divide_scalar(&r, &dev->real_volume, dev->base_volume);
 
@@ -1139,6 +1143,9 @@
 	bool mute;
 	int res;
 
+	if (!dev->mixer_handle)
+		return 0;
+
 	if ((res = pa_alsa_path_get_mute(dev->mixer_path, dev->mixer_handle, &mute)) < 0)
 		return res;
 
@@ -1157,6 +1164,10 @@
 static void set_mute(pa_alsa_device *dev, bool mute)
 {
 	dev->muted = mute;
+
+	if (!dev->mixer_handle)
+		return;
+
 	pa_alsa_path_set_mute(dev->mixer_path, dev->mixer_handle, mute);
 }
 
@@ -1735,7 +1746,8 @@
 		setting = data->setting;
 	}
 
-	pa_alsa_path_select(d->mixer_path, setting, d->mixer_handle, d->muted);
+	if (d->mixer_handle)
+		pa_alsa_path_select(d->mixer_path, setting, d->mixer_handle, d->muted);
 
 	if (d->set_mute)
 		d->set_mute(d, d->muted);

pipewire-0.3.56.tar.gz/spa/plugins/alsa/acp/alsa-mixer.c -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/acp/alsa-mixer.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/alsa/acp/alsa-ucm.c -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/acp/alsa-ucm.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/alsa/acp/alsa-util.c -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/acp/alsa-util.c Changed

@@ -656,6 +656,20 @@
     return pcm_handle;
 }
 
+int pa_alsa_close(snd_pcm_t **pcm)
+{
+    int err;
+    pa_assert(pcm);
+    pa_log_info("ALSA device close %p", *pcm);
+    if (*pcm == NULL)
+	    return 0;
+    if ((err = snd_pcm_close(*pcm)) < 0) {
+        pa_log_warn("ALSA close failed: %s", snd_strerror(err));
+    }
+    *pcm = NULL;
+    return err;
+}
+
 snd_pcm_t *pa_alsa_open_by_device_string(
         const char *device,
         char **dev,
@@ -691,8 +705,8 @@
             pa_log_info("Error opening PCM device %s: %s", d, pa_alsa_strerror(err));
             goto fail;
         }
-
-        pa_log_debug("Managed to open %s", d);
+        pa_log_info("ALSA device open '%s' %s: %p", d,
+			mode == SND_PCM_STREAM_CAPTURE ? "capture" : "playback", pcm_handle);
 
         if ((err = pa_alsa_set_hw_params(
                      pcm_handle,
@@ -707,7 +721,7 @@
             if (!reformat) {
                 reformat = true;
 
-                snd_pcm_close(pcm_handle);
+                pa_alsa_close(&pcm_handle);
                 continue;
             }
 
@@ -721,12 +735,12 @@
 
                 reformat = false;
 
-                snd_pcm_close(pcm_handle);
+                pa_alsa_close(&pcm_handle);
                 continue;
             }
 
             pa_log_info("Failed to set hardware parameters on %s: %s", d, pa_alsa_strerror(err));
-            snd_pcm_close(pcm_handle);
+            pa_alsa_close(&pcm_handle);
 
             goto fail;
         }
@@ -734,7 +748,7 @@
         if (ss->channels > PA_CHANNELS_MAX) {
             pa_log("Device %s has %u channels, but PulseAudio supports only %u channels. Unable to use the device.",
                    d, ss->channels, PA_CHANNELS_MAX);
-            snd_pcm_close(pcm_handle);
+            pa_alsa_close(&pcm_handle);
             goto fail;
         }

pipewire-0.3.56.tar.gz/spa/plugins/alsa/acp/alsa-util.h -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/acp/alsa-util.h Changed

pipewire-0.3.56.tar.gz/spa/plugins/alsa/alsa-pcm-sink.c -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/alsa-pcm-sink.c Changed

@@ -798,38 +798,38 @@
 static int impl_node_process(void *object)
 {
 	struct state *this = object;
-	struct spa_io_buffers *input;
+	struct spa_io_buffers *io;
 
 	spa_return_val_if_fail(this != NULL, -EINVAL);
 
-	input = this->io;
-	spa_return_val_if_fail(input != NULL, -EIO);
+	if ((io = this->io) == NULL)
+		return -EIO;
 
-	spa_log_trace_fp(this->log, "%p: process %d %d/%d", this, input->status,
-			input->buffer_id, this->n_buffers);
+	spa_log_trace_fp(this->log, "%p: process %d %d/%d", this, io->status,
+			io->buffer_id, this->n_buffers);
 
 	if (this->position && this->position->clock.flags & SPA_IO_CLOCK_FLAG_FREEWHEEL) {
-		input->status = SPA_STATUS_NEED_DATA;
+		io->status = SPA_STATUS_NEED_DATA;
 		return SPA_STATUS_HAVE_DATA;
 	}
-	if (input->status == SPA_STATUS_HAVE_DATA &&
-	    input->buffer_id < this->n_buffers) {
-		struct buffer *b = &this->buffersinput->buffer_id;
+	if (io->status == SPA_STATUS_HAVE_DATA &&
+	    io->buffer_id < this->n_buffers) {
+		struct buffer *b = &this->buffersio->buffer_id;
 
 		if (!SPA_FLAG_IS_SET(b->flags, BUFFER_FLAG_OUT)) {
 			spa_log_warn(this->log, "%p: buffer %u in use",
-					this, input->buffer_id);
-			input->status = -EINVAL;
+					this, io->buffer_id);
+			io->status = -EINVAL;
 			return -EINVAL;
 		}
-		spa_log_trace_fp(this->log, "%p: queue buffer %u", this, input->buffer_id);
+		spa_log_trace_fp(this->log, "%p: queue buffer %u", this, io->buffer_id);
 		spa_list_append(&this->ready, &b->link);
 		SPA_FLAG_CLEAR(b->flags, BUFFER_FLAG_OUT);
-		input->buffer_id = SPA_ID_INVALID;
+		io->buffer_id = SPA_ID_INVALID;
 
 		spa_alsa_write(this);
 
-		input->status = SPA_STATUS_OK;
+		io->status = SPA_STATUS_OK;
 	}
 	return SPA_STATUS_HAVE_DATA;
 }

pipewire-0.3.56.tar.gz/spa/plugins/alsa/alsa-pcm-source.c -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/alsa-pcm-source.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/alsa/alsa-pcm.c -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/alsa-pcm.c Changed

@@ -10,6 +10,7 @@
 
 #include <spa/pod/filter.h>
 #include <spa/utils/string.h>
+#include <spa/utils/result.h>
 #include <spa/support/system.h>
 #include <spa/utils/keys.h>
 
@@ -442,9 +443,31 @@
 	return changed;
 }
 
+#define CHECK(s,msg,...) if ((err = (s)) < 0) { spa_log_error(state->log, msg ": %s", ##__VA_ARGS__, snd_strerror(err)); return err; }
+
+static ssize_t log_write(void *cookie, const char *buf, size_t size)
+{
+	struct state *state = cookie;
+	int len;
+
+	while (size > 0) {
+		len = strcspn(buf, "\n");
+		if (len > 0)
+			spa_log_debug(state->log, "%.*s", (int)len, buf);
+		buf += len + 1;
+		size -= len + 1;
+	}
+	return size;
+}
+
+static cookie_io_functions_t io_funcs = {
+	.write = log_write,
+};
+
 int spa_alsa_init(struct state *state, const struct spa_dict *info)
 {
 	uint32_t i;
+	int err;
 
 	snd_config_update_free_global();
 
@@ -481,20 +504,31 @@
 		spa_log_error(state->log, "can't create card %u", state->card_index);
 		return -errno;
 	}
+	state->log_file = fopencookie(state, "w", io_funcs);
+	if (state->log_file == NULL) {
+		spa_log_error(state->log, "can't create log file");
+		return -errno;
+	}
+	CHECK(snd_output_stdio_attach(&state->output, state->log_file, 0), "attach failed");
+
 	return 0;
 }
 
 int spa_alsa_clear(struct state *state)
 {
+	int err;
+
 	release_card(state->card);
 
 	state->card = NULL;
 	state->card_index = SPA_ID_INVALID;
 
-	return 0;
-}
+	if ((err = snd_output_close(state->output)) < 0)
+		spa_log_warn(state->log, "output close failed: %s", snd_strerror(err));
+	fclose(state->log_file);
 
-#define CHECK(s,msg,...) if ((err = (s)) < 0) { spa_log_error(state->log, msg ": %s", ##__VA_ARGS__, snd_strerror(err)); return err; }
+	return err;
+}
 
 int spa_alsa_open(struct state *state, const char *params)
 {
@@ -505,8 +539,6 @@
 	if (state->opened)
 		return 0;
 
-	CHECK(snd_output_stdio_attach(&state->output, stderr, 0), "attach failed");
-
 	spa_scnprintf(device_name, sizeof(device_name), "%s%s%s",
 			state->card->ucm_prefix ? state->card->ucm_prefix : "",
 			props->device, params ? params : "");
@@ -538,6 +570,8 @@
 	return 0;
 
 error_exit_close:
+	spa_log_info(state->log, "%p: Device '%s' closing: %s", state, state->props.device,
+			spa_strerror(err));
 	snd_pcm_close(state->hndl);
 	return err;
 }
@@ -556,9 +590,6 @@
 		spa_log_warn(state->log, "%s: close failed: %s", state->props.device,
 				snd_strerror(err));
 
-	if ((err = snd_output_close(state->output)) < 0)
-		spa_log_warn(state->log, "output close failed: %s", snd_strerror(err));
-
 	spa_system_close(state->data_system, state->timerfd);
 
 	if (state->have_format)
@@ -763,6 +794,9 @@
 	CHECK(snd_pcm_hw_params_get_rate_min(params, &min, &dir), "get_rate_min");
 	CHECK(snd_pcm_hw_params_get_rate_max(params, &max, &dir), "get_rate_max");
 
+	spa_log_debug(state->log, "min:%u max:%u min-allowed:%u scale:%u all:%d",
+			min, max, min_allowed_rate, scale, all);
+
 	min_allowed_rate /= scale;
 	min = SPA_MAX(min_allowed_rate, min);
 
@@ -782,6 +816,9 @@
 
 	rate = SPA_CLAMP(rate, min, max);
 
+	spa_log_debug(state->log, "rate:%u multi:%d card:%d def:%d",
+			rate, state->multi_rate, state->card->rate, state->default_rate);
+
 	spa_pod_builder_prop(b, SPA_FORMAT_AUDIO_rate, 0);
 
 	spa_pod_builder_push_choice(b, &f0, SPA_CHOICE_None, 0);
@@ -833,7 +870,8 @@
 
 	CHECK(snd_pcm_hw_params_get_channels_min(params, &min), "get_channels_min");
 	CHECK(snd_pcm_hw_params_get_channels_max(params, &max), "get_channels_max");
-	spa_log_debug(state->log, "channels (%d %d)", min, max);
+	spa_log_debug(state->log, "channels (%d %d) default:%d all:%d",
+			min, max, state->default_channels, all);
 
 	if (state->default_channels != 0 && !all) {
 		if (min < state->default_channels)
@@ -914,6 +952,14 @@
 	return 1;
 }
 
+static void debug_hw_params(struct state *state, const char *prefix, snd_pcm_hw_params_t *params)
+{
+	if (SPA_UNLIKELY(spa_log_level_topic_enabled(state->log, SPA_LOG_TOPIC_DEFAULT, SPA_LOG_LEVEL_DEBUG))) {
+		spa_log_debug(state->log, "%s:", prefix);
+		snd_pcm_hw_params_dump(params, state->output);
+		fflush(state->log_file);
+	}
+}
 static int enum_pcm_formats(struct state *state, uint32_t index, uint32_t *next,
 		struct spa_pod **result, struct spa_pod_builder *b)
 {
@@ -931,6 +977,8 @@
 	snd_pcm_hw_params_alloca(&params);
 	CHECK(snd_pcm_hw_params_any(hndl, params), "Broken configuration: no configurations available");
 
+	debug_hw_params(state, __func__, params);
+
 	CHECK(snd_pcm_hw_params_set_rate_resample(hndl, params, 0), "set_rate_resample");
 
 	if (state->default_channels != 0) {
@@ -1077,6 +1125,8 @@
 	snd_pcm_hw_params_alloca(&params);
 	CHECK(snd_pcm_hw_params_any(hndl, params), "Broken configuration: no configurations available");
 
+	debug_hw_params(state, __func__, params);
+
 	CHECK(snd_pcm_hw_params_set_rate_resample(hndl, params, 0), "set_rate_resample");
 
 	spa_pod_builder_push_object(b, &f0, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat);
@@ -1138,6 +1188,8 @@
 	snd_pcm_hw_params_alloca(&params);
 	CHECK(snd_pcm_hw_params_any(hndl, params), "Broken configuration: no configurations available");
 
+	debug_hw_params(state, __func__, params);
+
 	snd_pcm_format_mask_alloca(&fmask);
 	snd_pcm_hw_params_get_format_mask(params, fmask);
 
@@ -1197,7 +1249,12 @@
 	struct spa_result_node_params result;
 	uint32_t count = 0;
 
+	spa_log_debug(state->log, "opened:%d format:%d started:%d", state->opened,
+			state->have_format, state->started);
+
 	opened = state->opened;
+	if (!state->started && state->have_format)
+		spa_alsa_close(state);
 	if ((err = spa_alsa_open(state, NULL)) < 0)
 		return err;
 
@@ -1258,6 +1315,9 @@
 	bool match = true, planar = false, is_batch;
 	char spdif_params128 = "";
 
+	spa_log_debug(state->log, "opened:%d format:%d started:%d", state->opened,
+			state->have_format, state->started);
+
 	state->use_mmap = !state->disable_mmap;
 
 	switch (fmt->media_subtype) {
@@ -1370,6 +1430,8 @@
 		return -EINVAL;
 	}
 
+	if (!state->started && state->have_format)
+		spa_alsa_close(state);
 	if ((err = spa_alsa_open(state, spdif_params)) < 0)
 		return err;
 
@@ -1378,6 +1440,9 @@
 	snd_pcm_hw_params_alloca(&params);
 	/* choose all parameters */
 	CHECK(snd_pcm_hw_params_any(hndl, params), "Broken configuration for playback: no configurations available");
+
+	debug_hw_params(state, __func__, params);
+
 	/* set hardware resampling, no resample */
 	CHECK(snd_pcm_hw_params_set_rate_resample(hndl, params, 0), "set_rate_resample");
 
@@ -1565,6 +1630,12 @@
 	/* write the parameters to the playback device */
 	CHECK(snd_pcm_sw_params(hndl, params), "sw_params");
 
+	if (SPA_UNLIKELY(spa_log_level_topic_enabled(state->log, SPA_LOG_TOPIC_DEFAULT, SPA_LOG_LEVEL_DEBUG))) {
+		spa_log_debug(state->log, "state after sw_params:");
+		snd_pcm_dump(hndl, state->output);
+		fflush(state->log_file);
+	}
+
 	return 0;
 }
 
@@ -1778,6 +1849,7 @@
 		*delay = avail;
 		*target = SPA_MAX(*target, state->read_size);
 	}
+	*target = SPA_MIN(*target, state->buffer_frames);
 	return 0;
 }
 
@@ -2351,7 +2423,7 @@
 	}
 
 #ifndef FASTPATH
-	if (SPA_UNLIKELY(spa_log_level_enabled(state->log, SPA_LOG_LEVEL_TRACE))) {
+	if (SPA_UNLIKELY(spa_log_level_topic_enabled(state->log, SPA_LOG_TOPIC_DEFAULT, SPA_LOG_LEVEL_TRACE))) {
 		struct timespec now;
 		uint64_t nsec;
 		if (spa_system_clock_gettime(state->data_system, CLOCK_MONOTONIC, &now) < 0)
@@ -2446,8 +2518,6 @@
 			state->following, state->matching, state->resample);
 
 	CHECK(set_swparams(state), "swparams");
-	if (SPA_UNLIKELY(spa_log_level_enabled(state->log, SPA_LOG_LEVEL_DEBUG)))
-		snd_pcm_dump(state->hndl, state->output);
 
 	if ((err = snd_pcm_prepare(state->hndl)) < 0 && err != -EBUSY) {
 		spa_log_error(state->log, "%s: snd_pcm_prepare error: %s",

pipewire-0.3.56.tar.gz/spa/plugins/alsa/alsa-pcm.h -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/alsa-pcm.h Changed

pipewire-0.3.56.tar.gz/spa/plugins/alsa/alsa-seq.c -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/alsa-seq.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/alsa/meson.build -> pipewire-0.3.57.tar.gz/spa/plugins/alsa/meson.build Changed

pipewire-0.3.57.tar.gz/spa/plugins/alsa/test-hw-params.c Added

@@ -0,0 +1,173 @@
+/* Spa
+ *
+ * Copyright © 2022 Wim Taymans
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <stdio.h>
+#include <stdbool.h>
+#include <limits.h>
+#include <getopt.h>
+#include <math.h>
+
+#include <alsa/asoundlib.h>
+
+#include <spa/utils/defs.h>
+
+#define DEFAULT_DEVICE	"default"
+
+
+struct state {
+	const char *device;
+	snd_output_t *output;
+	snd_pcm_t *hndl;
+};
+
+#define CHECK(s,msg,...) {		\
+	int __err;			\
+	if ((__err = (s)) < 0) {	\
+		fprintf(stderr, msg ": %s\n", ##__VA_ARGS__, snd_strerror(__err));	\
+		return __err;		\
+	}				\
+}
+
+static const char *get_class(snd_pcm_class_t c)
+{
+	switch (c) {
+	case SND_PCM_CLASS_GENERIC:
+		return "generic";
+	case SND_PCM_CLASS_MULTI:
+		return "multichannel";
+	case SND_PCM_CLASS_MODEM:
+		return "modem";
+	case SND_PCM_CLASS_DIGITIZER:
+		return "digitizer";
+	default:
+		return "unknown";
+	}
+}
+
+static const char *get_subclass(snd_pcm_subclass_t c)
+{
+	switch (c) {
+	case SND_PCM_SUBCLASS_GENERIC_MIX:
+		return "generic-mix";
+	case SND_PCM_SUBCLASS_MULTI_MIX:
+		return "multichannel-mix";
+	default:
+		return "unknown";
+	}
+}
+
+static void show_help(const char *name, bool error)
+{
+        fprintf(error ? stderr : stdout, "%s options\n"
+		"  -h, --help                            Show this help\n"
+		"  -D, --device                          device name (default '%s')\n"
+		"  -C, --capture                         capture mode (default playback)\n",
+		name, DEFAULT_DEVICE);
+}
+
+int main(int argc, char *argv)
+{
+	struct state state = { 0, };
+	snd_pcm_hw_params_t *hparams;
+	snd_pcm_info_t *info;
+	snd_pcm_sync_id_t sync;
+	snd_pcm_stream_t stream = SND_PCM_STREAM_PLAYBACK;
+	snd_pcm_chmap_query_t **maps;
+	int c, i;
+	static const struct option long_options = {
+		{ "help",	no_argument,		NULL, 'h' },
+		{ "device",	required_argument,	NULL, 'D' },
+		{ "capture",	no_argument,		NULL, 'C' },
+		{ NULL, 0, NULL, 0}
+	};
+	state.device = DEFAULT_DEVICE;
+
+	while ((c = getopt_long(argc, argv, "hD:C", long_options, NULL)) != -1) {
+		switch (c) {
+		case 'h':
+			show_help(argv0, false);
+			return 0;
+		case 'D':
+			state.device = optarg;
+			break;
+		case 'C':
+			stream = SND_PCM_STREAM_CAPTURE;
+			break;
+		default:
+			show_help(argv0, true);
+			return -1;
+		}
+	}
+
+	CHECK(snd_output_stdio_attach(&state.output, stdout, 0), "attach failed");
+
+	fprintf(stdout, "opening device: '%s'\n", state.device);
+
+	CHECK(snd_pcm_open(&state.hndl, state.device, stream, 0),
+			"open %s failed", state.device);
+
+	snd_pcm_info_alloca(&info);
+	snd_pcm_info(state.hndl, info);
+
+	fprintf(stdout, "info:\n");
+	fprintf(stdout, "  device: %u\n", snd_pcm_info_get_device(info));
+	fprintf(stdout, "  subdevice: %u\n", snd_pcm_info_get_subdevice(info));
+	fprintf(stdout, "  stream: %s\n", snd_pcm_stream_name(snd_pcm_info_get_stream(info)));
+	fprintf(stdout, "  card: %d\n", snd_pcm_info_get_card(info));
+	fprintf(stdout, "  id: '%s'\n", snd_pcm_info_get_id(info));
+	fprintf(stdout, "  name: '%s'\n", snd_pcm_info_get_name(info));
+	fprintf(stdout, "  subdevice name: '%s'\n", snd_pcm_info_get_subdevice_name(info));
+	fprintf(stdout, "  class: %s\n", get_class(snd_pcm_info_get_class(info)));
+	fprintf(stdout, "  subclass: %s\n", get_subclass(snd_pcm_info_get_subclass(info)));
+	fprintf(stdout, "  subdevice count: %u\n", snd_pcm_info_get_subdevices_count(info));
+	fprintf(stdout, "  subdevice avail: %u\n", snd_pcm_info_get_subdevices_avail(info));
+	sync = snd_pcm_info_get_sync(info);
+	fprintf(stdout, "  sync: %08x:%08x:%08x:%08x\n",
+			sync.id320, sync.id321, sync.id322,sync.id323);
+
+	/* channel maps */
+	if ((maps = snd_pcm_query_chmaps(state.hndl)) != NULL) {
+		fprintf(stdout, "channels:\n");
+
+		for (i = 0; mapsi; i++) {
+			snd_pcm_chmap_t* map = &mapsi->map;
+			char buf2048;
+
+			snd_pcm_chmap_print(map, sizeof(buf), buf);
+
+			fprintf(stdout, "  %d: %s\n", map->channels, buf);
+		}
+		snd_pcm_free_chmaps(maps);
+	}
+
+	/* hw params */
+	snd_pcm_hw_params_alloca(&hparams);
+	snd_pcm_hw_params_any(state.hndl, hparams);
+
+	snd_pcm_hw_params_dump(hparams, state.output);
+
+	snd_pcm_close(state.hndl);
+
+	return EXIT_SUCCESS;
+}

pipewire-0.3.56.tar.gz/spa/plugins/audioconvert/audioconvert.c -> pipewire-0.3.57.tar.gz/spa/plugins/audioconvert/audioconvert.c Changed

@@ -909,8 +909,7 @@
 			}
 			break;
 		case SPA_PROP_rate:
-			if (spa_pod_get_double(&prop->value, &p->rate) == 0)
-				changed++;
+			spa_pod_get_double(&prop->value, &p->rate);
 			break;
 		case SPA_PROP_params:
 			changed += parse_prop_params(this, &prop->value);
@@ -1471,26 +1470,29 @@
 
 	rate = this->io_position ?  this->io_position->clock.rate.denom : DEFAULT_RATE;
 
-	if (in->format.info.raw.rate == 0 && in->mode == SPA_PARAM_PORT_CONFIG_MODE_dsp)
+	/* in DSP mode we always convert to the DSP rate */
+	if (in->mode == SPA_PARAM_PORT_CONFIG_MODE_dsp)
 		in->format.info.raw.rate = rate;
-	if (out->format.info.raw.rate == 0 && out->mode == SPA_PARAM_PORT_CONFIG_MODE_dsp)
+	if (out->mode == SPA_PARAM_PORT_CONFIG_MODE_dsp)
 		out->format.info.raw.rate = rate;
 
+	/* try to passthrough the rates */
 	if (in->format.info.raw.rate == 0)
 		in->format.info.raw.rate = out->format.info.raw.rate;
 	else if (out->format.info.raw.rate == 0)
 		out->format.info.raw.rate = in->format.info.raw.rate;
 
-	if (in->format.info.raw.rate == 0 && out->format.info.raw.rate == 0)
-		return -EINVAL;
-	if (in->format.info.raw.channels == 0 && out->format.info.raw.channels == 0)
-		return -EINVAL;
-
+	/* try to passthrough the channels */
 	if (in->format.info.raw.channels == 0)
 		in->format.info.raw.channels = out->format.info.raw.channels;
 	else if (out->format.info.raw.channels == 0)
 		out->format.info.raw.channels = in->format.info.raw.channels;
 
+	if (in->format.info.raw.rate == 0 || out->format.info.raw.rate == 0)
+		return -EINVAL;
+	if (in->format.info.raw.channels == 0 || out->format.info.raw.channels == 0)
+		return -EINVAL;
+
 	if ((res = setup_in_convert(this)) < 0)
 		return res;
 	if ((res = setup_channelmix(this)) < 0)
@@ -1722,21 +1724,51 @@
 			param = spa_format_audio_raw_build(&b, id, &port->format.info.raw);
 		break;
 	case SPA_PARAM_Buffers:
+	{
+		uint32_t size;
+		struct dir *dir;
+
 		if (!port->have_format)
 			return -EIO;
 		if (result.index > 0)
 			return 0;
 
+		dir = &this->dirdirection;
+		if (dir->mode == SPA_PARAM_PORT_CONFIG_MODE_dsp) {
+			/* DSP ports always use the quantum_limit as the buffer
+			 * size. */
+			size = this->quantum_limit;
+		} else {
+			uint32_t irate, orate;
+			/* Convert ports are scaled so that they can always
+			 * provide one quantum of data */
+			irate = dir->format.info.raw.rate;
+
+			/* collect the other port rate */
+			dir = &this->dirSPA_DIRECTION_REVERSE(direction);
+			if (dir->mode == SPA_PARAM_PORT_CONFIG_MODE_dsp)
+				orate = this->io_position ?  this->io_position->clock.rate.denom : DEFAULT_RATE;
+			else
+				orate = dir->format.info.raw.rate;
+
+			/* always keep some extra room for adaptive resampling */
+			size = this->quantum_limit * 2;
+			/*  scale the buffer size when we can. */
+			if (irate != 0 && orate != 0)
+				size = size * (irate + orate - 1) / orate;
+		}
+
 		param = spa_pod_builder_add_object(&b,
 			SPA_TYPE_OBJECT_ParamBuffers, id,
 			SPA_PARAM_BUFFERS_buffers, SPA_POD_CHOICE_RANGE_Int(2, 1, MAX_BUFFERS),
 			SPA_PARAM_BUFFERS_blocks,  SPA_POD_Int(port->blocks),
 			SPA_PARAM_BUFFERS_size,    SPA_POD_CHOICE_RANGE_Int(
-								this->quantum_limit * port->stride,
+								size * port->stride,
 								16 * port->stride,
 								INT32_MAX),
 			SPA_PARAM_BUFFERS_stride,  SPA_POD_Int(port->stride));
 		break;
+	}
 	case SPA_PARAM_Meta:
 		switch (result.index) {
 		case 0:
@@ -2193,15 +2225,22 @@
 	return end ? 1 : 0;
 }
 
+static uint32_t resample_get_in_size(struct impl *this, bool passthrough, uint32_t out_size)
+{
+	uint32_t match_size = passthrough ? out_size : resample_in_len(&this->resample, out_size);
+	spa_log_trace_fp(this->log, "%p: current match %u", this, match_size);
+	return match_size;
+}
+
 static uint32_t resample_update_rate_match(struct impl *this, bool passthrough, uint32_t out_size, uint32_t in_queued)
 {
-	double rate = this->rate_scale / this->props.rate;
 	uint32_t delay, match_size;
 
 	if (passthrough) {
 		delay = 0;
 		match_size = out_size;
 	} else {
+		double rate = this->rate_scale / this->props.rate;
 		if (this->io_rate_match &&
 		    SPA_FLAG_IS_SET(this->io_rate_match->flags, SPA_IO_RATE_MATCH_FLAG_ACTIVE))
 			rate *= this->io_rate_match->rate;
@@ -2470,16 +2509,16 @@
 
 	/* calculate how many samples we are going to consume. */
 	if (this->direction == SPA_DIRECTION_INPUT) {
-		uint32_t n_in;
-		/* then figure out how much input samples we need to consume */
-		n_in = resample_update_rate_match(this, resample_passthrough, n_out, 0);
 		if (!in_avail || this->drained) {
+			/* no input, ask for more, update rate-match first */
+			resample_update_rate_match(this, resample_passthrough, n_out, 0);
 			spa_log_trace_fp(this->log, "%p: no input drained:%d", this, this->drained);
-			/* no input, ask for more */
 			res |= this->drained ? SPA_STATUS_DRAINED : SPA_STATUS_NEED_DATA;
 			return res;
 		}
-		n_samples = SPA_MIN(n_samples, n_in);
+		/* else figure out how much input samples we need to consume */
+		n_samples = SPA_MIN(n_samples,
+				resample_get_in_size(this, resample_passthrough, n_out));
 	} else {
 		/* in merge mode we consume one duration of samples */
 		n_samples = SPA_MIN(n_samples, quant_samples);

pipewire-0.3.56.tar.gz/spa/plugins/audioconvert/channelmix-ops.c -> pipewire-0.3.57.tar.gz/spa/plugins/audioconvert/channelmix-ops.c Changed

@@ -200,6 +200,7 @@
 				matrixii= 1.0f;
 		}
 		src_mask = dst_mask = ~0LU;
+		filter_fc = filter_lfe = true;
 		goto done;
 	} else {
 		spa_log_debug(mix->log, "matching channels");
@@ -398,6 +399,15 @@
 	spa_log_debug(mix->log, "unassigned upmix %08"PRIx64" lfe:%f",
 			unassigned, mix->lfe_cutoff);
 
+	if (unassigned & STEREO) {
+		if ((src_mask & FRONT) == FRONT) {
+			spa_log_debug(mix->log, "produce STEREO from FC");
+			_MATRIX(FL,FC) += clev;
+			_MATRIX(FR,FC) += clev;
+		} else {
+			spa_log_warn(mix->log, "can't produce STEREO");
+		}
+	}
 	if (unassigned & FRONT) {
 		if ((src_mask & STEREO) == STEREO) {
 			spa_log_debug(mix->log, "produce FC from STEREO");
@@ -431,10 +441,13 @@
 			spa_log_debug(mix->log, "produce SIDE from STEREO");
 			_MATRIX(SL,FL) += slev;
 			_MATRIX(SR,FR) += slev;
-		} else if ((src_mask & FRONT) == FRONT) {
+		} else if ((src_mask & FRONT) == FRONT &&
+			mix->upmix == CHANNELMIX_UPMIX_SIMPLE) {
 			spa_log_debug(mix->log, "produce SIDE from FC");
 			_MATRIX(SL,FC) += clev;
 			_MATRIX(SR,FC) += clev;
+		} else {
+			spa_log_debug(mix->log, "won't produce SIDE");
 		}
 	}
 	if (unassigned & REAR) {
@@ -446,10 +459,13 @@
 			spa_log_debug(mix->log, "produce REAR from STEREO");
 			_MATRIX(RL,FL) += slev;
 			_MATRIX(RR,FR) += slev;
-		} else if ((src_mask & FRONT) == FRONT) {
+		} else if ((src_mask & FRONT) == FRONT &&
+			mix->upmix == CHANNELMIX_UPMIX_SIMPLE) {
 			spa_log_debug(mix->log, "produce REAR from FC");
 			_MATRIX(RL,FC) += clev;
 			_MATRIX(RR,FC) += clev;
+		} else {
+			spa_log_debug(mix->log, "won't produce SIDE");
 		}
 	}

pipewire-0.3.56.tar.gz/spa/plugins/audioconvert/fmt-ops-avx2.c -> pipewire-0.3.57.tar.gz/spa/plugins/audioconvert/fmt-ops-avx2.c Changed

@@ -362,7 +362,7 @@
 	float *d0 = dst0, *d1 = dst1, *d2 = dst2, *d3 = dst3;
 	uint32_t n, unrolled;
 	__m256i in4, t4;
-	__m256 out4, factor = _mm256_set1_ps(1.0f / S32_SCALE);
+	__m256 out4, factor = _mm256_set1_ps(1.0f / S24_SCALE);
 	__m256i mask1 = _mm256_setr_epi64x(0*n_channels, 0*n_channels+2, 4*n_channels, 4*n_channels+2);
 	__m256i mask2 = _mm256_setr_epi64x(1*n_channels, 1*n_channels+2, 5*n_channels, 5*n_channels+2);
 	__m256i mask3 = _mm256_setr_epi64x(2*n_channels, 2*n_channels+2, 6*n_channels, 6*n_channels+2);
@@ -391,6 +391,11 @@
 		in2 = _mm256_unpacklo_epi64(t1, t3);     /* c0 c1 c2 c3 c4 c5 c6 c7 */
 		in3 = _mm256_unpackhi_epi64(t1, t3);     /* d0 d1 d2 d3 d4 d5 d6 d7 */
 
+		in0 = _mm256_srai_epi32(in0, 8);
+		in1 = _mm256_srai_epi32(in1, 8);
+		in2 = _mm256_srai_epi32(in2, 8);
+		in3 = _mm256_srai_epi32(in3, 8);
+
 		out0 = _mm256_cvtepi32_ps(in0);
 		out1 = _mm256_cvtepi32_ps(in1);
 		out2 = _mm256_cvtepi32_ps(in2);
@@ -409,11 +414,11 @@
 		s += 8*n_channels;
 	}
 	for(; n < n_samples; n++) {
-		__m128 out4, factor = _mm_set1_ps(1.0f / S32_SCALE);
-		out0 = _mm_cvtsi32_ss(factor, s0);
-		out1 = _mm_cvtsi32_ss(factor, s1);
-		out2 = _mm_cvtsi32_ss(factor, s2);
-		out3 = _mm_cvtsi32_ss(factor, s3);
+		__m128 out4, factor = _mm_set1_ps(1.0f / S24_SCALE);
+		out0 = _mm_cvtsi32_ss(factor, s0 >> 8);
+		out1 = _mm_cvtsi32_ss(factor, s1 >> 8);
+		out2 = _mm_cvtsi32_ss(factor, s2 >> 8);
+		out3 = _mm_cvtsi32_ss(factor, s3 >> 8);
 		out0 = _mm_mul_ss(out0, factor);
 		out1 = _mm_mul_ss(out1, factor);
 		out2 = _mm_mul_ss(out2, factor);
@@ -434,7 +439,7 @@
 	float *d0 = dst0, *d1 = dst1;
 	uint32_t n, unrolled;
 	__m256i in4, t4;
-	__m256 out4, factor = _mm256_set1_ps(1.0f / S32_SCALE);
+	__m256 out4, factor = _mm256_set1_ps(1.0f / S24_SCALE);
 	__m256i perm = _mm256_setr_epi32(0, 2, 4, 6, 1, 3, 5, 7);
 	__m256i mask1 = _mm256_setr_epi64x(0*n_channels, 1*n_channels, 2*n_channels, 3*n_channels);
 	__m256i mask2 = _mm256_setr_epi64x(4*n_channels, 5*n_channels, 6*n_channels, 7*n_channels);
@@ -455,6 +460,9 @@
 		in0 = _mm256_permute2x128_si256(t0, t1, 0 | (2 << 4));
 		in1 = _mm256_permute2x128_si256(t0, t1, 1 | (3 << 4));
 
+		in0 = _mm256_srai_epi32(in0, 8);
+		in1 = _mm256_srai_epi32(in1, 8);
+
 		out0 = _mm256_cvtepi32_ps(in0);
 		out1 = _mm256_cvtepi32_ps(in1);
 
@@ -467,9 +475,9 @@
 		s += 8*n_channels;
 	}
 	for(; n < n_samples; n++) {
-		__m128 out2, factor = _mm_set1_ps(1.0f / S32_SCALE);
-		out0 = _mm_cvtsi32_ss(factor, s0);
-		out1 = _mm_cvtsi32_ss(factor, s1);
+		__m128 out2, factor = _mm_set1_ps(1.0f / S24_SCALE);
+		out0 = _mm_cvtsi32_ss(factor, s0 >> 8);
+		out1 = _mm_cvtsi32_ss(factor, s1 >> 8);
 		out0 = _mm_mul_ss(out0, factor);
 		out1 = _mm_mul_ss(out1, factor);
 		_mm_store_ss(&d0n, out0);
@@ -486,7 +494,7 @@
 	float *d0 = dst0;
 	uint32_t n, unrolled;
 	__m256i in2;
-	__m256 out2, factor = _mm256_set1_ps(1.0f / S32_SCALE);
+	__m256 out2, factor = _mm256_set1_ps(1.0f / S24_SCALE);
 	__m256i mask1 = _mm256_setr_epi64x(0*n_channels, 1*n_channels, 2*n_channels, 3*n_channels);
 	__m256i mask2 = _mm256_setr_epi64x(4*n_channels, 5*n_channels, 6*n_channels, 7*n_channels);
 
@@ -503,6 +511,9 @@
 				_mm256_i64gather_epi32(&s 8*n_channels, mask1, 4),
 				_mm256_i64gather_epi32(&s 8*n_channels, mask2, 4));
 
+		in0 = _mm256_srai_epi32(in0, 8);
+		in1 = _mm256_srai_epi32(in1, 8);
+
 		out0 = _mm256_cvtepi32_ps(in0);
 		out1 = _mm256_cvtepi32_ps(in1);
 
@@ -515,8 +526,8 @@
 		s += 16*n_channels;
 	}
 	for(; n < n_samples; n++) {
-		__m128 out, factor = _mm_set1_ps(1.0f / S32_SCALE);
-		out = _mm_cvtsi32_ss(factor, s0);
+		__m128 out, factor = _mm_set1_ps(1.0f / S24_SCALE);
+		out = _mm_cvtsi32_ss(factor, s0 >> 8);
 		out = _mm_mul_ss(out, factor);
 		_mm_store_ss(&d0n, out);
 		s += n_channels;

pipewire-0.3.56.tar.gz/spa/plugins/audioconvert/fmt-ops-neon.c -> pipewire-0.3.57.tar.gz/spa/plugins/audioconvert/fmt-ops-neon.c Changed

@@ -26,6 +26,8 @@
 #include <stdio.h>
 #include <math.h>
 
+#include <arm_neon.h>
+
 #include "fmt-ops.h"
 
 void
@@ -289,16 +291,19 @@
 
 #ifdef __aarch64__
 	asm volatile(
+		"      dup v2.4s, %wscale\n"
 		"      cmp %n_samples, #0\n"
 		"      beq 2f\n"
 		"1:"
 		"      ld1 { v0.4s }, %s0, #16\n"
 		"      ld1 { v1.4s }, %s1, #16\n"
 		"      subs %n_samples, %n_samples, #4\n"
-		"      fcvtzs v0.4s, v0.4s, #31\n"
-		"      fcvtzs v1.4s, v1.4s, #31\n"
-		"      sqrshrn v0.4h, v0.4s, #16\n"
-		"      sqrshrn v1.4h, v1.4s, #16\n"
+		"      sqadd  v0.4s, v0.4s, v2.4s\n"
+		"      sqadd  v1.4s, v1.4s, v2.4s\n"
+		"      fcvtns v0.4s, v0.4s\n"
+		"      fcvtns v1.4s, v1.4s\n"
+		"      sqxtn  v0.4h, v0.4s\n"
+		"      sqxtn  v1.4h, v1.4s\n"
 		"      st2 { v0.h, v1.h }0, %d, %stride\n"
 		"      st2 { v0.h, v1.h }1, %d, %stride\n"
 		"      st2 { v0.h, v1.h }2, %d, %stride\n"
@@ -311,29 +316,42 @@
 		"      ld1 { v0.s }0, %s0, #4\n"
 		"      ld1 { v2.s }0, %s1, #4\n"
 		"      subs %remainder, %remainder, #1\n"
-		"      fcvtzs v0.4s, v0.4s, #31\n"
-		"      fcvtzs v1.4s, v1.4s, #31\n"
-		"      sqrshrn v0.4h, v0.4s, #16\n"
-		"      sqrshrn v1.4h, v1.4s, #16\n"
+		"      sqadd  v0.4s, v0.4s, v2.4s\n"
+		"      sqadd  v1.4s, v1.4s, v2.4s\n"
+		"      fcvtns v0.4s, v0.4s\n"
+		"      fcvtns v1.4s, v1.4s\n"
+		"      sqxtn  v0.4h, v0.4s\n"
+		"      sqxtn  v1.4h, v1.4s\n"
 		"      st2 { v0.h, v1.h }0, %d, %stride\n"
 		"      bne 3b\n"
 		"4:"
 		: d "+r" (d), s0 "+r" (s0), s1 "+r" (s1), n_samples "+r" (n_samples),
 		  remainder "+r" (remainder)
-		: stride "r" (stride)
+		: stride "r" (stride),
+		  scale "r" (15 << 23)
 		: "cc", "v0", "v1");
 #else
+	float32x4_t pos = vdupq_n_f32(0.4999999f / S16_SCALE);
+	float32x4_t neg = vdupq_n_f32(-0.4999999f / S16_SCALE);
+
 	asm volatile(
+		"      veor q2, q2, q2\n"
 		"      cmp %n_samples, #0\n"
 		"      beq 2f\n"
 		"1:"
 		"      vld1.32 { q0 }, %s0!\n"
 		"      vld1.32 { q1 }, %s1!\n"
 		"      subs %n_samples, %n_samples, #4\n"
-		"      vcvt.s32.f32 q0, q0, #31\n"
-		"      vcvt.s32.f32 q1, q1, #31\n"
-		"      vqrshrn.s32 d0, q0, #16\n"
-		"      vqrshrn.s32 d1, q1, #16\n"
+		"      vcgt.f32 q3, q0, q2\n"
+		"      vcgt.f32 q4, q0, q2\n"
+		"      vbsl q3, %qpos, %qneg\n"
+		"      vbsl q4, %qpos, %qneg\n"
+		"      vadd.f32 q0, q0, q3\n"
+		"      vadd.f32 q1, q1, q4\n"
+		"      vcvt.s32.f32 q0, q0, #15\n"
+		"      vcvt.s32.f32 q1, q1, #15\n"
+		"      vqmovn.s32 d0, q0\n"
+		"      vqmovn.s32 d1, q1\n"
 		"      vst2.16 { d00, d10 }, %d, %stride\n"
 		"      vst2.16 { d01, d11 }, %d, %stride\n"
 		"      vst2.16 { d02, d12 }, %d, %stride\n"
@@ -346,17 +364,25 @@
 		"      vld1.32 { d00 }, %s0!\n"
 		"      vld1.32 { d20 }, %s1!\n"
 		"      subs %remainder, %remainder, #1\n"
-		"      vcvt.s32.f32 q0, q0, #31\n"
-		"      vcvt.s32.f32 q1, q1, #31\n"
-		"      vqrshrn.s32 d0, q0, #16\n"
-		"      vqrshrn.s32 d1, q1, #16\n"
+		"      vcgt.f32 q3, q0, q2\n"
+		"      vcgt.f32 q4, q0, q2\n"
+		"      vbsl q3, %qpos, %qneg\n"
+		"      vbsl q4, %qpos, %qneg\n"
+		"      vadd.f32 q0, q0, q3\n"
+		"      vadd.f32 q1, q1, q4\n"
+		"      vcvt.s32.f32 q0, q0, #15\n"
+		"      vcvt.s32.f32 q1, q1, #15\n"
+		"      vqmovn.s32 d0, q0\n"
+		"      vqmovn.s32 d1, q1\n"
 		"      vst2.16 { d00, d10 }, %d, %stride\n"
 		"      bne 3b\n"
 		"4:"
 		: d "+r" (d), s0 "+r" (s0), s1 "+r" (s1), n_samples "+r" (n_samples),
 		  remainder "+r" (remainder)
-		: stride "r" (stride)
-		: "cc", "q0", "q1");
+		: stride "r" (stride),
+		  pos"w"(pos),
+		  neg"w"(neg)
+		: "cc", "q0", "q1", "q2", "q3", "q4");
 #endif
 }
 
@@ -372,13 +398,15 @@
 
 #ifdef __aarch64__
 	asm volatile(
+		"      dup v2.4s, %wscale\n"
 		"      cmp %n_samples, #0\n"
 		"      beq 2f\n"
 		"1:"
 		"      ld1 { v0.4s }, %s, #16\n"
 		"      subs %n_samples, %n_samples, #4\n"
-		"      fcvtzs v0.4s, v0.4s, #31\n"
-		"      sqrshrn v0.4h, v0.4s, #16\n"
+		"      sqadd  v0.4s, v0.4s, v2.4s\n"
+		"      fcvtns v0.4s, v0.4s\n"
+		"      sqxtn  v0.4h, v0.4s\n"
 		"      st1 { v0.h }0, %d, %stride\n"
 		"      st1 { v0.h }1, %d, %stride\n"
 		"      st1 { v0.h }2, %d, %stride\n"
@@ -390,24 +418,33 @@
 		"3:"
 		"      ld1 { v0.s }0, %s, #4\n"
 		"      subs %remainder, %remainder, #1\n"
-		"      fcvtzs v0.4s, v0.4s, #31\n"
-		"      sqrshrn v0.4h, v0.4s, #16\n"
+		"      sqadd  v0.4s, v0.4s, v2.4s\n"
+		"      fcvtns v0.4s, v0.4s\n"
+		"      sqxtn  v0.4h, v0.4s\n"
 		"      st1 { v0.h }0, %d, %stride\n"
 		"      bne 3b\n"
 		"4:"
 		: d "+r" (d), s "+r" (s), n_samples "+r" (n_samples),
 		  remainder "+r" (remainder)
-		: stride "r" (stride)
+		: stride "r" (stride),
+		  scale "r" (15 << 23)
 		: "cc", "v0");
 #else
+	float32x4_t pos = vdupq_n_f32(0.4999999f / S16_SCALE);
+	float32x4_t neg = vdupq_n_f32(-0.4999999f / S16_SCALE);
+
 	asm volatile(
+		"      veor q1, q1, q1\n"
 		"      cmp %n_samples, #0\n"
 		"      beq 2f\n"
 		"1:"
 		"      vld1.32 { q0 }, %s!\n"
 		"      subs %n_samples, %n_samples, #4\n"
-		"      vcvt.s32.f32 q0, q0, #31\n"
-		"      vqrshrn.s32 d0, q0, #16\n"
+		"      vcgt.f32 q2, q0, q1\n"
+		"      vbsl q2, %qpos, %qneg\n"
+		"      vadd.f32 q0, q0, q2\n"
+		"      vcvt.s32.f32 q0, q0, #15\n"
+		"      vqmovn.s32 d0, q0\n"
 		"      vst1.16 { d00 }, %d, %stride\n"
 		"      vst1.16 { d01 }, %d, %stride\n"
 		"      vst1.16 { d02 }, %d, %stride\n"
@@ -419,15 +456,20 @@
 		"3:"
 		"      vld1.32 { d00 }, %s!\n"
 		"      subs %remainder, %remainder, #1\n"
-		"      vcvt.s32.f32 q0, q0, #31\n"
-		"      vqrshrn.s32 d0, q0, #16\n"
+		"      vcgt.f32 q2, q0, q1\n"
+		"      vbsl q2, %qpos, %qneg\n"
+		"      vadd.f32 q0, q0, q2\n"
+		"      vcvt.s32.f32 q0, q0, #15\n"
+		"      vqmovn.s32 d0, q0\n"
 		"      vst1.16 { d00 }, %d, %stride\n"
 		"      bne 3b\n"
 		"4:"
 		: d "+r" (d), s "+r" (s), n_samples "+r" (n_samples),
 		  remainder "+r" (remainder)
-		: stride "r" (stride)
-		: "cc", "q0");
+		: stride "r" (stride),
+		  pos"w"(pos),
+		  neg"w"(neg)
+		: "cc", "q0", "q1", "q2");
 #endif
 }

pipewire-0.3.56.tar.gz/spa/plugins/audioconvert/fmt-ops.h -> pipewire-0.3.57.tar.gz/spa/plugins/audioconvert/fmt-ops.h Changed

pipewire-0.3.56.tar.gz/spa/plugins/audioconvert/resample-native.c -> pipewire-0.3.57.tar.gz/spa/plugins/audioconvert/resample-native.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/audioconvert/test-fmt-ops.c -> pipewire-0.3.57.tar.gz/spa/plugins/audioconvert/test-fmt-ops.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/audioconvert/test-source.c -> pipewire-0.3.57.tar.gz/spa/plugins/audioconvert/test-source.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/audiomixer/audiomixer.c -> pipewire-0.3.57.tar.gz/spa/plugins/audiomixer/audiomixer.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/audiomixer/mixer-dsp.c -> pipewire-0.3.57.tar.gz/spa/plugins/audiomixer/mixer-dsp.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/audiotestsrc/audiotestsrc.c -> pipewire-0.3.57.tar.gz/spa/plugins/audiotestsrc/audiotestsrc.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/avb/avb-pcm-sink.c -> pipewire-0.3.57.tar.gz/spa/plugins/avb/avb-pcm-sink.c Changed

@@ -699,40 +699,39 @@
 {
 	struct state *this = object;
 	struct port *port;
-	struct spa_io_buffers *input;
+	struct spa_io_buffers *io;
 
 	spa_return_val_if_fail(this != NULL, -EINVAL);
 
 	port = GET_PORT(this, SPA_DIRECTION_INPUT, 0);
+	if ((io = port->io) == NULL)
+		return -EIO;
 
-	input = port->io;
-	spa_return_val_if_fail(input != NULL, -EIO);
-
-	spa_log_trace_fp(this->log, "%p: process %d %d/%d", this, input->status,
-			input->buffer_id, port->n_buffers);
+	spa_log_trace_fp(this->log, "%p: process %d %d/%d", this, io->status,
+			io->buffer_id, port->n_buffers);
 
 	if (this->position && this->position->clock.flags & SPA_IO_CLOCK_FLAG_FREEWHEEL) {
-		input->status = SPA_STATUS_NEED_DATA;
+		io->status = SPA_STATUS_NEED_DATA;
 		return SPA_STATUS_HAVE_DATA;
 	}
-	if (input->status == SPA_STATUS_HAVE_DATA &&
-	    input->buffer_id < port->n_buffers) {
-		struct buffer *b = &port->buffersinput->buffer_id;
+	if (io->status == SPA_STATUS_HAVE_DATA &&
+	    io->buffer_id < port->n_buffers) {
+		struct buffer *b = &port->buffersio->buffer_id;
 
 		if (!SPA_FLAG_IS_SET(b->flags, BUFFER_FLAG_OUT)) {
 			spa_log_warn(this->log, "%p: buffer %u in use",
-					this, input->buffer_id);
-			input->status = -EINVAL;
+					this, io->buffer_id);
+			io->status = -EINVAL;
 			return -EINVAL;
 		}
-		spa_log_trace_fp(this->log, "%p: queue buffer %u", this, input->buffer_id);
+		spa_log_trace_fp(this->log, "%p: queue buffer %u", this, io->buffer_id);
 		spa_list_append(&port->ready, &b->link);
 		SPA_FLAG_CLEAR(b->flags, BUFFER_FLAG_OUT);
-		input->buffer_id = SPA_ID_INVALID;
+		io->buffer_id = SPA_ID_INVALID;
 
 		spa_avb_write(this);
 
-		input->status = SPA_STATUS_OK;
+		io->status = SPA_STATUS_OK;
 	}
 	return SPA_STATUS_HAVE_DATA;
 }

pipewire-0.3.56.tar.gz/spa/plugins/avb/avb-pcm-source.c -> pipewire-0.3.57.tar.gz/spa/plugins/avb/avb-pcm-source.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/avb/avbtp/packets.h -> pipewire-0.3.57.tar.gz/spa/plugins/avb/avbtp/packets.h Changed

pipewire-0.3.57.tar.gz/spa/plugins/bluez5/README-OPUS-A2DP.md Added

@@ -0,0 +1,321 @@
+---
+title: OPUS-A2DP-0.5 specification
+author: Pauli Virtanen <pav@iki.fi>
+date: Jun 4, 2022
+---
+
+# OPUS-A2DP-0.5 specification
+
+DRAFT
+
+In this file, we specify how to use Opus as an A2DP vendor codec. We
+will call this "OPUS-A2DP-0.5". There is no previous public
+specification for using Opus as an A2DP vendor codec (to my
+knowledge), which is why we need this one.
+
+_TOC_
+
+# A2DP Codec Capabilities
+
+The A2DP capability structure is as follows.
+
+Integer fields and multi-byte bitfields are laid out in **little
+endian** order.  All integer fields are unsigned.
+
+Each entry may have different meaning when present as a capability.
+Below, we indicate this by abbreviations CAP/SNK for sink capability,
+CAP/SRC for source capability, CAP for capability as either, and SEL
+for the selected value by SRC.
+
+Bits in fields marked RFA (Reserved For Additions) shall be set to
+zero.
+
+The capability and configuration structure is as follows:
+
+| Octet | Bits | Meaning                                       |
+|-------|------|-----------------------------------------------|
+| 0-5   | 0-7  | Vendor ID Part                                |
+| 6-7   | 0-7  | Channel Configuration                         |
+| 8-11  | 0-7  | Audio Location Configuration                  |
+| 12-14 | 0-7  | Limits Configuration                          |
+| 15-16 | 0-7  | Return Direction Channel Configuration        |
+| 17-20 | 0-7  | Return Direction Audio Location Configuration |
+| 21-23 | 0-7  | Return Direction Limits Configuration         |
+
+See `a2dp-codec-caps.h` for definition as C structs.
+
+## Vendor ID Part
+
+The fixed value
+
+| Octet | Bits | Meaning                       |
+|-------|------|-------------------------------|
+| 0-3   | 0-7  | A2DP Vendor ID (0x05F1)       |
+| 4-5   | 0-7  | A2DP Vendor Codec ID (0x1005) |
+
+The Vendor ID is that of the Linux Foundation, and we are using it
+here unofficially.
+
+## Channel Configuration
+
+The channel configuration consists of the channel count and a bitfield
+indicating which of them are encoded in coupled streams.
+
+| Octet | Bits | Meaning                                                    |
+|-------|------|------------------------------------------------------------|
+| 6     | 0-7  | Channel Count. CAP: maximum number supported. SEL: actual. |
+| 7     | 0-7  | Coupled Stream Count. CAP: 0. SEL: actual.                 |
+
+The Channel Count indicates the number of logical channels encoded in
+the data stream.
+
+The Coupled Stream Count indicates the number of streams that encode a
+coupled (left & right) channel pair.  The count shall satisfy
+`(Channel Count) >= 2*(Coupled Stream Count)`.
+The Stream Count is `(Channel Count) - (Coupled Stream Count)`.
+
+Streams and Coupled Streams have the same meaning as in Sec. 5.1.1 of
+Opus Multistream RFC7845.
+
+The logical Channels are identified by a Channel Index *j* such that `0 <= j
+< (Channel Count)`. The channels `0 <= j < 2*(Coupled Stream Count)`
+are encoded in the *k*-th stream of the payload, where `k = floor(j/2)` and
+`j mod 2` determines which of the two channels of the stream the logical
+channel is. The channels `2*(Coupled Stream Count) <= j < (Channel Count)`
+are encoded in the *k*-th stream of the payload, where `k = j - (Coupled Stream Count)`.
+The prescription here is identical to RFC7845 with channel mapping
+`mappingj = j`.
+
+The semantic meaning for each channel is determined by their Audio
+Location.
+
+## Audio Location Configuration
+
+The channel audio location specification is similar to the location
+bitfield of the `Audio_Channel_Allocation` LTV structure in Bluetooth
+SIG Assigned Numbers, Generic Audio used in the LE Audio.
+
+| Octet | Bits | Meaning                                              |
+|-------|------|------------------------------------------------------|
+| 8-11  | 0-7  | Audio Location bitfield. CAP: available. SEL: actual |
+
+The values specified in CAP are informative, and SEL may contain bits
+that were not set in CAP. SNK shall handle unsupported audio
+locations. It may do this for example by ignoring unsupported channels
+or via suitable up/downmixing.  Hence, SRC may transmit channels with
+audio locations that are not marked supported by SNK. The maximum
+Channel Count however shall not be exceeded.
+
+The audio location bitfield values defined in Assigned Numbers,
+Generic Audio are:
+
+| Channel Order | Bitmask    | Audio Location          |
+|---------------|------------|-------------------------|
+| 0             | 0x00000001 | Front Left              |
+| 1             | 0x00000002 | Front Right             |
+| 2             | 0x00000400 | Side Left               |
+| 3             | 0x00000800 | Side Right              |
+| 4             | 0x00000010 | Back Left               |
+| 5             | 0x00000020 | Back Right              |
+| 6             | 0x00000040 | Front Left of Center    |
+| 7             | 0x00000080 | Front Right of Center   |
+| 8             | 0x00001000 | Top Front Left          |
+| 9             | 0x00002000 | Top Front Right         |
+| 10            | 0x00040000 | Top Side Left           |
+| 11            | 0x00080000 | Top Side Right          |
+| 12            | 0x00010000 | Top Back Left           |
+| 13            | 0x00020000 | Top Back Right          |
+| 14            | 0x00400000 | Bottom Front Left       |
+| 15            | 0x00800000 | Bottom Front Right      |
+| 16            | 0x01000000 | Front Left Wide         |
+| 17            | 0x02000000 | Front Right Wide        |
+| 18            | 0x04000000 | Left Surround           |
+| 19            | 0x08000000 | Right Surround          |
+| 20            | 0x00000004 | Front Center            |
+| 21            | 0x00000100 | Back Center             |
+| 22            | 0x00004000 | Top Front Center        |
+| 23            | 0x00008000 | Top Center              |
+| 24            | 0x00100000 | Top Back Center         |
+| 25            | 0x00200000 | Bottom Front Center     |
+| 26            | 0x00000008 | Low Frequency Effects 1 |
+| 27            | 0x00000200 | Low Frequency Effects 2 |
+| 28            | 0x10000000 | RFA                     |
+| 29            | 0x20000000 | RFA                     |
+| 30            | 0x40000000 | RFA                     |
+| 31            | 0x80000000 | RFA                     |
+
+In addition, we define a specific Channel Order for each.  The bits
+set in the bitfield define audio locations for the streams present in the
+payload. The set bit with the smallest Channel Order value defines the
+audio location for the Channel Index *j=0*, the bit with the next
+lowest Channel Order value defines the audio location for the Channel
+Index *j=1*, and so forth.
+
+When the Channel Count is larger than the number of bits set in the
+Audio Location bitfield, the audio locations of the remaining channels
+are unspecified. Implementations may handle them as appropriate for
+their use case, considering them as AUX0-AUXN, or in the case of
+Channel Count = 1, as the single mono audio channel.
+
+When the Channel Count is smaller than the number of bits set in the
+Audio Location bitfield, the audio locations for the channels are
+assigned as above, and remaining excess bits shall be ignored.
+
+The channel ordering defined here is compatible with the internal
+stream ordering in the reference Opus Multistream surround encoder
+Mapping Family 0 and 1 output. This allows making use of its surround
+masking and LFE handling capabilities.  The stream ordering of the
+reference Opus surround encoder, although being unchanged since its
+addition in 2013, is an internal detail of the
+encoder. Implementations using the surround encoder shall check that
+the mapping table used by the encoder corresponds to the above channel
+ordering.
+
+For reference, we list the Audio Location bitfield values
+corresponding to the different channel counts in Opus Mapping Family 0
+and 1 surround encoder output, and the expected mapping table:
+
+| Mapping Family | Channel Count | Audio Location Value | Stream Ordering                 | Mapping Table            |
+|----------------|---------------|----------------------|---------------------------------|--------------------------|
+| 0              | 1             | 0x00000000           | mono                            | {0}                      |
+| 0              | 2             | 0x00000003           | FL, FR                          | {0, 1}                   |
+| 1              | 1             | 0x00000000           | mono                            | {0}                      |
+| 1              | 2             | 0x00000003           | FL, FR                          | {0, 1}                   |
+| 1              | 3             | 0x00000007           | FL, FR, FC                      | {0, 2, 1}                |
+| 1              | 4             | 0x00000033           | FL, FR, BL, BR                  | {0, 1, 2, 3}             |
+| 1              | 5             | 0x00000037           | FL, FR, BL, BR, FC              | {0, 4, 1, 2, 3}          |
+| 1              | 6             | 0x0000003f           | FL, FR, BL, BR, FC, LFE         | {0, 4, 1, 2, 3, 5}       |
+| 1              | 7             | 0x00000d0f           | FL, FR, SL, SR, FC, BC, LFE     | {0, 4, 1, 2, 3, 5, 6}    |
+| 1              | 8             | 0x00000c3f           | FL, FR, SL, SR, BL, BR, FC, LFE | {0, 6, 1, 2, 3, 4, 5, 7} |
+
+The Mapping Table in the table indicates the mapping table selected by
+`opus_multistream_surround_encoder_create` (Opus 1.3.1). If the
+encoder outputs a different mapping table in a future Opus encoder
+release, the channel ordering will be incorrect, and the surround
+encoder can not be used. We expect that the probability of the Opus
+encoder authors making such changes is negligible.
+
+## Limits Configuration
+
+The limits for allowed frame durations and maximum bitrate can also be
+configured.
+
+| Octet | Bits | Meaning                                             |
+|-------|------|-----------------------------------------------------|
+| 16    | 0    | Frame duration 2.5ms. CAP: supported, SEL: selected |
+| 16    | 1    | Frame duration 5ms. CAP: supported, SEL: selected   |
+| 16    | 2    | Frame duration 10ms. CAP: supported, SEL: selected  |
+| 16    | 3    | Frame duration 20ms. CAP: supported, SEL: selected  |
+| 16    | 4    | Frame duration 40ms. CAP: supported, SEL: selected  |
+| 16    | 5-7  | RFA                                                 |
+
+| Octet | Bits | Meaning                                        |
+|-------|------|------------------------------------------------|
+| 17-18 | 0-7  | Maximum bitrate. CAP: supported, SEL: selected |
+
+The maximum bitrate is given in units of 1024 bits per second.
+
+The maximum bitrate field in CAP may contain value 0 to indicate
+everything is supported.
+
+## Bidirectional Audio Configuration
+
+Bidirectional audio may be supported. Its Channel Configuration, Audio
+Location Configuration, and Limits Configuration have identical form
+to the forward direction, and represented by exactly similar
+structures.
+
+Namely:
+
+| Octet | Bits | Meaning                                            |
+|-------|------|----------------------------------------------------|
+| 19-20 | 0-7  | Channel Configuration fields, for return direction |
+| 21-28 | 0-7  | Audio Location fields, for return direction        |
+| 29-31 | 0-7  | Limits Configuration fields, for return direction  |
+
+If no return channel is supported or selected, the number of channels
+is set to 0 in CAP or SEL.
+
+
+# Packet Structure
+
+Each packet consists of an RTP header, an RTP payload header, and a
+payload containing Opus Multistream data.
+
+| Octet | Bits | Meaning                  |
+|-------|------|--------------------------|
+| 0-11  | 0-7  | RTP header               |
+| 12    | 0-7  | RTP payload header       |
+| 13-N  | 0-7  | Opus Multistream payload |
+
+For each Bluetooth packet, the payload shall contain exactly one Opus
+Multistream packet, or a fragment of one. The Opus Multistream packet
+may be fragmented to several consecutive Bluetooth packets.
+
+The format of the Multistream data is the same as in the audio packets
+of RFC7845, or, as produced/consumed by the Opus Multistream API.
+
+(Note that we DO NOT follow RFC7587, as we want fragmentation and
+multichannel support.)
+
+## RTP Header
+
+See RFC3550.
+
+The RTP payload type is pt=96 (dynamic).
+
+## RTP Payload Header
+
+The RTP payload header is used to indicate if and how the Opus
+Multistream packet is fragmented across several consecutive Bluetooth
+packets.
+
+| Octet  | Bits | Meaning
+|--------|------|--------------------------------------------------------
+|   0    | 0-3  | Frame Count
+|   4    | 4    | RFA
+|   4    | 5    | Is Last Fragment
+|   4    | 6    | Is First Fragment
+|   4    | 7    | Is Fragmented
+
+In each packet, Frame Count indicates how many Bluetooth packets are
+still to be received (including the present packet) before the Opus
+Multistream packet is complete.
+
+The Is Fragment flag indicates whether the present packet contains
+fragmented payload.
+
+The Is Last Fragment flag indicates whether the present packet is the
+last part of fragmented payload.
+
+The Is First Fragment flag indicates whether the present packet is the
+first part of fragmented payload.
+
+In non-fragmented packets, Frame Count shall be (1), and the other bits
+in the header zero.
+
+## Opus Payload
+
+The Opus payload is a single Opus Multistream packet, or its fragment.
+
+In case of fragmentation, as indicated by the RTP payload header,
+concatenating the payloads of the fragment Bluetooth packets shall
+yield the total Opus Multistream packet.
+
+The SRC should choose encoder parameters such that Bluetooth bandwidth
+limitations are not exceeded.
+
+The SRC may include FEC data. The SNK may enable forward error
+correction instead of PLC.
+
+
+# References
+
+1. IETF RFC 3550: RFC3550
+2. IETF RFC 7587: RFC7587
+3. IETF RFC 7845: RFC7845
+
+RFC3550: https://datatracker.ietf.org/doc/html/rfc3550
+RFC7587: https://datatracker.ietf.org/doc/html/rfc7587
+RFC7845: https://datatracker.ietf.org/doc/html/rfc7845
+Assigned Numbers, Generic Audio: https://www.bluetooth.com/specifications/assigned-numbers/

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codec-aac.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codec-aac.c Changed

@@ -31,10 +31,16 @@
 #include <spa/utils/dict.h>
 
 #include <fdk-aac/aacenc_lib.h>
+#include <fdk-aac/aacdecoder_lib.h>
 
 #include "rtp.h"
 #include "a2dp-codecs.h"
 
+static struct spa_log *log;
+static struct spa_log_topic log_topic = SPA_LOG_TOPIC(0, "spa.bluez5.codecs.aac");
+#undef SPA_LOG_TOPIC_DEFAULT
+#define SPA_LOG_TOPIC_DEFAULT &log_topic
+
 #define DEFAULT_AAC_BITRATE	320000
 #define MIN_AAC_BITRATE		64000
 
@@ -44,6 +50,7 @@
 
 struct impl {
 	HANDLE_AACENCODER aacenc;
+	HANDLE_AACDECODER aacdec;
 
 	struct rtp_header *header;
 
@@ -170,7 +177,7 @@
 	return sizeof(conf);
 }
 
-static int codec_enum_config(const struct a2dp_codec *codec,
+static int codec_enum_config(const struct a2dp_codec *codec, uint32_t flags,
 		const void *caps, size_t caps_size, uint32_t id, uint32_t idx,
 		struct spa_pod_builder *b, struct spa_pod **param)
 {
@@ -289,7 +296,7 @@
 	return 0;
 }
 
-static void *codec_init_props(const struct a2dp_codec *codec, const struct spa_dict *settings)
+static void *codec_init_props(const struct a2dp_codec *codec, uint32_t flags, const struct spa_dict *settings)
 {
 	struct props *p = calloc(1, sizeof(struct props));
 	const char *str;
@@ -412,11 +419,39 @@
 
 	this->codesize = enc_info.frameLength * this->channels * this->samplesize;
 
+	this->aacdec = aacDecoder_Open(TT_MP4_LATM_MCP1, 1);
+	if (!this->aacdec) {
+		res = -EINVAL;
+		goto error;
+	}
+
+#ifdef AACDECODER_LIB_VL0
+	res = aacDecoder_SetParam(this->aacdec, AAC_PCM_MIN_OUTPUT_CHANNELS, this->channels);
+	if (res != AAC_DEC_OK) {
+		spa_log_debug(log, "Couldn't set min output channels: 0x%04X", res);
+		goto error;
+	}
+
+	res = aacDecoder_SetParam(this->aacdec, AAC_PCM_MAX_OUTPUT_CHANNELS, this->channels);
+	if (res != AAC_DEC_OK) {
+		spa_log_debug(log, "Couldn't set max output channels: 0x%04X", res);
+		goto error;
+	}
+#else
+	res = aacDecoder_SetParam(this->aacdec, AAC_PCM_OUTPUT_CHANNELS, this->channels);
+	if (res != AAC_DEC_OK) {
+		spa_log_debug(log, "Couldn't set output channels: 0x%04X", res);
+		goto error;
+	}
+#endif
+
 	return this;
 
 error:
 	if (this && this->aacenc)
 		aacEncClose(&this->aacenc);
+	if (this && this->aacdec)
+		aacDecoder_Close(this->aacdec);
 	free(this);
 	errno = -res;
 	return NULL;
@@ -427,6 +462,8 @@
 	struct impl *this = data;
 	if (this->aacenc)
 		aacEncClose(&this->aacenc);
+	if (this->aacdec)
+		aacDecoder_Close(this->aacdec);
 	free(this);
 }
 
@@ -502,6 +539,55 @@
 	return out_args.numInSamples * this->samplesize;
 }
 
+static int codec_start_decode (void *data,
+		const void *src, size_t src_size, uint16_t *seqnum, uint32_t *timestamp)
+{
+	const struct rtp_header *header = src;
+	size_t header_size = sizeof(struct rtp_header);
+
+	spa_return_val_if_fail (src_size > header_size, -EINVAL);
+
+	if (seqnum)
+		*seqnum = ntohs(header->sequence_number);
+	if (timestamp)
+		*timestamp = ntohl(header->timestamp);
+
+	return header_size;
+}
+
+static int codec_decode(void *data,
+		const void *src, size_t src_size,
+		void *dst, size_t dst_size,
+		size_t *dst_out)
+{
+	struct impl *this = data;
+	uint data_size = (uint)src_size;
+	uint bytes_valid = data_size;
+	CStreamInfo *aacinf;
+	int res;
+
+	res = aacDecoder_Fill(this->aacdec, (UCHAR **)&src, &data_size, &bytes_valid);
+	if (res != AAC_DEC_OK) {
+		spa_log_debug(log, "AAC buffer fill error: 0x%04X", res);
+		return -EINVAL;
+	}
+
+	res = aacDecoder_DecodeFrame(this->aacdec, dst, dst_size, 0);
+	if (res != AAC_DEC_OK) {
+		spa_log_debug(log, "AAC decode frame error: 0x%04X", res);
+		return -EINVAL;
+	}
+
+	aacinf = aacDecoder_GetStreamInfo(this->aacdec);
+	if (!aacinf) {
+		spa_log_debug(log, "AAC get stream info failed");
+		return -EINVAL;
+	}
+	*dst_out = aacinf->frameSize * aacinf->numChannels * this->samplesize;
+
+	return src_size - bytes_valid;
+}
+
 static int codec_abr_process (void *data, size_t unsent)
 {
 	return -ENOTSUP;
@@ -538,6 +624,12 @@
 	return codec_change_bitrate(this, (this->cur_bitrate * 4) / 3);
 }
 
+static void codec_set_log(struct spa_log *global_log)
+{
+	log = global_log;
+	spa_log_topic_init(log, &log_topic);
+}
+
 const struct a2dp_codec a2dp_codec_aac = {
 	.id = SPA_BLUETOOTH_AUDIO_CODEC_AAC,
 	.codec_id = A2DP_CODEC_MPEG24,
@@ -554,9 +646,12 @@
 	.get_block_size = codec_get_block_size,
 	.start_encode = codec_start_encode,
 	.encode = codec_encode,
+	.start_decode = codec_start_decode,
+	.decode = codec_decode,
 	.abr_process = codec_abr_process,
 	.reduce_bitpool = codec_reduce_bitpool,
 	.increase_bitpool = codec_increase_bitpool,
+	.set_log = codec_set_log,
 };
 
 A2DP_CODEC_EXPORT_DEF(

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codec-aptx.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codec-aptx.c Changed

@@ -218,7 +218,7 @@
 	return actual_conf_size;
 }
 
-static int codec_enum_config(const struct a2dp_codec *codec,
+static int codec_enum_config(const struct a2dp_codec *codec, uint32_t flags,
 		const void *caps, size_t caps_size, uint32_t id, uint32_t idx,
 		struct spa_pod_builder *b, struct spa_pod **param)
 {
@@ -458,7 +458,7 @@
  * When connected as SRC to SNK, aptX-LL sink may send back mSBC data.
  */
 
-static int msbc_enum_config(const struct a2dp_codec *codec,
+static int msbc_enum_config(const struct a2dp_codec *codec, uint32_t flags,
 		const void *caps, size_t caps_size, uint32_t id, uint32_t idx,
 		struct spa_pod_builder *b, struct spa_pod **param)
 {
@@ -710,6 +710,11 @@
 	.increase_bitpool = msbc_increase_bitpool,
 };
 
+static const struct spa_dict_item duplex_info_items = {
+	{ "duplex.boost", "true" },
+};
+static const struct spa_dict duplex_info = SPA_DICT_INIT_ARRAY(duplex_info_items);
+
 const struct a2dp_codec a2dp_codec_aptx_ll_duplex_0 = {
 	APTX_LL_COMMON_DEFS,
 	.id = SPA_BLUETOOTH_AUDIO_CODEC_APTX_LL_DUPLEX,
@@ -718,6 +723,7 @@
 	.name = "aptx_ll_duplex",
 	.endpoint_name = "aptx_ll_duplex_0",
 	.duplex_codec = &aptx_ll_msbc,
+	.info = &duplex_info,
 };
 
 const struct a2dp_codec a2dp_codec_aptx_ll_duplex_1 = {
@@ -728,6 +734,7 @@
 	.name = "aptx_ll_duplex",
 	.endpoint_name = "aptx_ll_duplex_1",
 	.duplex_codec = &aptx_ll_msbc,
+	.info = &duplex_info,
 };
 
 A2DP_CODEC_EXPORT_DEF(

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codec-caps.h -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codec-caps.h Changed

@@ -233,6 +233,54 @@
 #define LC3PLUS_HR_SAMPLING_FREQ_48000	(1 << 8)
 #define LC3PLUS_HR_SAMPLING_FREQ_96000	(1 << 7)
 
+#define OPUS_05_VENDOR_ID		0x000005f1
+#define OPUS_05_CODEC_ID		0x1005
+
+#define OPUS_05_MAPPING_FAMILY_0	(1 << 0)
+#define OPUS_05_MAPPING_FAMILY_1	(1 << 1)
+#define OPUS_05_MAPPING_FAMILY_255	(1 << 2)
+
+#define OPUS_05_FRAME_DURATION_25	(1 << 0)
+#define OPUS_05_FRAME_DURATION_50	(1 << 1)
+#define OPUS_05_FRAME_DURATION_100	(1 << 2)
+#define OPUS_05_FRAME_DURATION_200	(1 << 3)
+#define OPUS_05_FRAME_DURATION_400	(1 << 4)
+
+#define OPUS_05_GET_UINT16(a, field)			\
+	(((a).field ## 2 << 8) | (a).field ## 1)
+#define OPUS_05_INIT_UINT16(field, v)			\
+	.field ## 1 = ((v) & 0xff),			\
+	.field ## 2 = (((v) >> 8) & 0xff),
+#define OPUS_05_SET_UINT16(a, field, v)			\
+	do {						\
+		(a).field ## 1 = ((v) & 0xff);		\
+		(a).field ## 2 = (((v) >> 8) & 0xff);	\
+	} while (0)
+#define OPUS_05_GET_UINT32(a, field)				\
+	(((a).field ## 4 << 24) | ((a).field ## 3 << 16) |	\
+	((a).field ## 2 << 8) | (a).field ## 1)
+#define OPUS_05_INIT_UINT32(field, v)			\
+	.field ## 1 = ((v) & 0xff),			\
+	.field ## 2 = (((v) >> 8) & 0xff),		\
+	.field ## 3 = (((v) >> 16) & 0xff),		\
+	.field ## 4 = (((v) >> 24) & 0xff),
+#define OPUS_05_SET_UINT32(a, field, v)			\
+	do {						\
+		(a).field ## 1 = ((v) & 0xff);		\
+		(a).field ## 2 = (((v) >> 8) & 0xff);	\
+		(a).field ## 3 = (((v) >> 16) & 0xff);	\
+		(a).field ## 4 = (((v) >> 24) & 0xff);	\
+	} while (0)
+
+#define OPUS_05_GET_LOCATION(a) OPUS_05_GET_UINT32(a, location)
+#define OPUS_05_INIT_LOCATION(v) OPUS_05_INIT_UINT32(location, v)
+#define OPUS_05_SET_LOCATION(a, v) OPUS_05_SET_UINT32(a, location, v)
+
+#define OPUS_05_GET_BITRATE(a) OPUS_05_GET_UINT16(a, bitrate)
+#define OPUS_05_INIT_BITRATE(v) OPUS_05_INIT_UINT16(bitrate, v)
+#define OPUS_05_SET_BITRATE(a, v) OPUS_05_SET_UINT16(a, bitrate, v)
+
+
 typedef struct {
 	uint32_t vendor_id;
 	uint16_t codec_id;
@@ -391,4 +439,22 @@
 	uint8_t frequency2;
 } __attribute__ ((packed)) a2dp_lc3plus_hr_t;
 
+typedef struct {
+	uint8_t channels;
+	uint8_t coupled_streams;
+	uint8_t location1;
+	uint8_t location2;
+	uint8_t location3;
+	uint8_t location4;
+	uint8_t frame_duration;
+	uint8_t bitrate1;
+	uint8_t bitrate2;
+} __attribute__ ((packed)) a2dp_opus_05_direction_t;
+
+typedef struct {
+	a2dp_vendor_codec_t info;
+	a2dp_opus_05_direction_t main;
+	a2dp_opus_05_direction_t bidi;
+} __attribute__ ((packed)) a2dp_opus_05_t;
+
 #endif

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codec-faststream.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codec-faststream.c Changed

@@ -129,7 +129,7 @@
 	return sizeof(conf);
 }
 
-static int codec_enum_config(const struct a2dp_codec *codec,
+static int codec_enum_config(const struct a2dp_codec *codec, uint32_t flags,
 		const void *caps, size_t caps_size, uint32_t id, uint32_t idx,
 		struct spa_pod_builder *b, struct spa_pod **param)
 {
@@ -372,7 +372,7 @@
  * When connected as SRC to SNK, FastStream sink may send back SBC data.
  */
 
-static int duplex_enum_config(const struct a2dp_codec *codec,
+static int duplex_enum_config(const struct a2dp_codec *codec, uint32_t flags,
 		const void *caps, size_t caps_size, uint32_t id, uint32_t idx,
 		struct spa_pod_builder *b, struct spa_pod **param)
 {
@@ -614,17 +614,23 @@
 	.reduce_bitpool = codec_reduce_bitpool,		\
 	.increase_bitpool = codec_increase_bitpool
 
-const struct a2dp_codec a2dp_codec_faststream = {
+static const struct a2dp_codec a2dp_codec_faststream = {
 	FASTSTREAM_COMMON_DEFS,
 	.id = SPA_BLUETOOTH_AUDIO_CODEC_FASTSTREAM,
 	.name = "faststream",
 };
 
+static const struct spa_dict_item duplex_info_items = {
+	{ "duplex.boost", "true" },
+};
+static const struct spa_dict duplex_info = SPA_DICT_INIT_ARRAY(duplex_info_items);
+
 const struct a2dp_codec a2dp_codec_faststream_duplex = {
 	FASTSTREAM_COMMON_DEFS,
 	.id = SPA_BLUETOOTH_AUDIO_CODEC_FASTSTREAM_DUPLEX,
 	.name = "faststream_duplex",
 	.duplex_codec = &duplex_codec,
+	.info = &duplex_info,
 };
 
 A2DP_CODEC_EXPORT_DEF(

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codec-lc3plus.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codec-lc3plus.c Changed

@@ -150,8 +150,8 @@
 	return sizeof(conf);
 }
 
-static int codec_caps_preference_cmp(const struct a2dp_codec *codec, const void *caps1, size_t caps1_size,
-		const void *caps2, size_t caps2_size, const struct a2dp_codec_audio_info *info)
+static int codec_caps_preference_cmp(const struct a2dp_codec *codec, uint32_t flags, const void *caps1, size_t caps1_size,
+		const void *caps2, size_t caps2_size, const struct a2dp_codec_audio_info *info, const struct spa_dict *global_settings)
 {
 	a2dp_lc3plus_hr_t conf1, conf2;
 	a2dp_lc3plus_hr_t *conf;
@@ -160,7 +160,7 @@
 
 	/* Order selected configurations by preference */
 	res1 = codec->select_config(codec, 0, caps1, caps1_size, info, NULL, (uint8_t *)&conf1);
-	res2 = codec->select_config(codec, 0, caps2, caps2_size, info , NULL, (uint8_t *)&conf2);
+	res2 = codec->select_config(codec, 0, caps2, caps2_size, info, NULL, (uint8_t *)&conf2);
 
 #define PREFER_EXPR(expr)			\
 		do {				\
@@ -190,7 +190,7 @@
 #undef PREFER_BOOL
 }
 
-static int codec_enum_config(const struct a2dp_codec *codec,
+static int codec_enum_config(const struct a2dp_codec *codec, uint32_t flags,
 		const void *caps, size_t caps_size, uint32_t id, uint32_t idx,
 		struct spa_pod_builder *b, struct spa_pod **param)
 {

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codec-ldac.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codec-ldac.c Changed

pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codec-opus.c Added

@@ -0,0 +1,1437 @@
+/* Spa A2DP Opus Codec
+ *
+ * Copyright © 2020 Wim Taymans
+ * Copyright © 2022 Pauli Virtanen
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <unistd.h>
+#include <string.h>
+#include <stddef.h>
+#include <errno.h>
+#include <arpa/inet.h>
+#if __BYTE_ORDER != __LITTLE_ENDIAN
+#include <byteswap.h>
+#endif
+
+#include <spa/debug/types.h>
+#include <spa/param/audio/type-info.h>
+#include <spa/param/audio/raw.h>
+#include <spa/utils/string.h>
+#include <spa/utils/dict.h>
+#include <spa/param/audio/format.h>
+#include <spa/param/audio/format-utils.h>
+
+#include <opus.h>
+#include <opus_multistream.h>
+
+#include "rtp.h"
+#include "a2dp-codecs.h"
+
+static struct spa_log *log;
+static struct spa_log_topic log_topic = SPA_LOG_TOPIC(0, "spa.bluez5.codecs.opus");
+#undef SPA_LOG_TOPIC_DEFAULT
+#define SPA_LOG_TOPIC_DEFAULT &log_topic
+
+#define BUFSIZE_FROM_BITRATE(frame_dms,bitrate)	((bitrate)/8 * (frame_dms) / 10000 * 5/4)  /* estimate */
+
+/*
+ * Opus CVBR target bitrate. When connecting, it is set to the INITIAL
+ * value, and after that adjusted according to link quality between the MIN and
+ * MAX values. The bitrate adjusts up to either MAX or the value at
+ * which the socket buffer starts filling up, whichever is lower.
+ *
+ * With perfect connection quality, the target bitrate converges to the MAX
+ * value. Under realistic conditions, the upper limit may often be as low as
+ * 300-500kbit/s, so the INITIAL values are not higher than this.
+ *
+ * The MAX is here set to 2-2.5x and INITIAL to 1.5x the upper Opus recommended
+ * values 1, to be safer quality-wise for CVBR, and MIN to the lower
+ * recommended value.
+ *
+ * 1 https://wiki.xiph.org/Opus_Recommended_Settings
+ */
+#define BITRATE_INITIAL			192000
+#define BITRATE_MAX			320000
+#define BITRATE_MIN			96000
+
+#define BITRATE_INITIAL_51		384000
+#define BITRATE_MAX_51			600000
+#define BITRATE_MIN_51			128000
+
+#define BITRATE_INITIAL_71		450000
+#define BITRATE_MAX_71			900000
+#define BITRATE_MIN_71			256000
+
+#define BITRATE_DUPLEX_BIDI		160000
+
+#define OPUS_05_MAX_BYTES	(15 * 1024)
+
+struct props {
+	uint32_t channels;
+	uint32_t coupled_streams;
+	uint32_t location;
+	uint32_t max_bitrate;
+	uint8_t frame_duration;
+	int application;
+
+	uint32_t bidi_channels;
+	uint32_t bidi_coupled_streams;
+	uint32_t bidi_location;
+	uint32_t bidi_max_bitrate;
+	uint32_t bidi_frame_duration;
+	int bidi_application;
+};
+
+struct dec_data {
+	int fragment_size;
+	int fragment_count;
+	uint8_t fragmentOPUS_05_MAX_BYTES;
+};
+
+struct abr {
+	uint64_t now;
+	uint64_t last_update;
+
+	uint32_t buffer_level;
+	uint32_t packet_size;
+	uint32_t total_size;
+	bool bad;
+
+	uint64_t last_change;
+	uint64_t retry_interval;
+
+	bool prev_bad;
+};
+
+struct enc_data {
+	struct rtp_header *header;
+	struct rtp_payload *payload;
+
+	struct abr abr;
+
+	int samples;
+	int codesize;
+
+	int packet_size;
+	int fragment_size;
+	int fragment_count;
+	void *fragment;
+
+	int bitrate_min;
+	int bitrate_max;
+
+	int bitrate;
+	int next_bitrate;
+
+	int frame_dms;
+	int application;
+};
+
+struct impl {
+	OpusMSEncoder *enc;
+	OpusMSDecoder *dec;
+
+	int mtu;
+	int samplerate;
+	int application;
+
+	uint8_t channels;
+	uint8_t streams;
+	uint8_t coupled_streams;
+
+	bool is_bidi;
+
+	struct dec_data d;
+	struct enc_data e;
+};
+
+struct audio_location {
+	uint32_t mask;
+	enum spa_audio_channel position;
+};
+
+struct surround_encoder_mapping {
+	uint8_t channels;
+	uint8_t coupled_streams;
+	uint32_t location;
+	uint8_t mapping8;		/**< permutation streams -> vorbis order */
+	uint8_t inv_mapping8;		/**< permutation vorbis order -> streams */
+};
+
+/* Bluetooth SIG, Assigned Numbers, Generic Audio, Audio Location Definitions */
+#define BT_AUDIO_LOCATION_FL	0x00000001  /* Front Left */
+#define BT_AUDIO_LOCATION_FR	0x00000002  /* Front Right */
+#define BT_AUDIO_LOCATION_FC	0x00000004  /* Front Center */
+#define BT_AUDIO_LOCATION_LFE	0x00000008  /* Low Frequency Effects 1 */
+#define BT_AUDIO_LOCATION_RL	0x00000010  /* Back Left */
+#define BT_AUDIO_LOCATION_RR	0x00000020  /* Back Right */
+#define BT_AUDIO_LOCATION_FLC	0x00000040  /* Front Left of Center */
+#define BT_AUDIO_LOCATION_FRC	0x00000080  /* Front Right of Center */
+#define BT_AUDIO_LOCATION_RC	0x00000100  /* Back Center */
+#define BT_AUDIO_LOCATION_LFE2	0x00000200  /* Low Frequency Effects 2 */
+#define BT_AUDIO_LOCATION_SL	0x00000400  /* Side Left */
+#define BT_AUDIO_LOCATION_SR	0x00000800  /* Side Right */
+#define BT_AUDIO_LOCATION_TFL	0x00001000  /* Top Front Left */
+#define BT_AUDIO_LOCATION_TFR	0x00002000  /* Top Front Right */
+#define BT_AUDIO_LOCATION_TFC	0x00004000  /* Top Front Center */
+#define BT_AUDIO_LOCATION_TC	0x00008000  /* Top Center */
+#define BT_AUDIO_LOCATION_TRL	0x00010000  /* Top Back Left */
+#define BT_AUDIO_LOCATION_TRR	0x00020000  /* Top Back Right */
+#define BT_AUDIO_LOCATION_TSL	0x00040000  /* Top Side Left */
+#define BT_AUDIO_LOCATION_TSR	0x00080000  /* Top Side Right */
+#define BT_AUDIO_LOCATION_TRC	0x00100000  /* Top Back Center */
+#define BT_AUDIO_LOCATION_BC	0x00200000  /* Bottom Front Center */
+#define BT_AUDIO_LOCATION_BLC	0x00400000  /* Bottom Front Left */
+#define BT_AUDIO_LOCATION_BRC	0x00800000  /* Bottom Front Right */
+#define BT_AUDIO_LOCATION_FLW	0x01000000  /* Fron Left Wide */
+#define BT_AUDIO_LOCATION_FRW	0x02000000  /* Front Right Wide */
+#define BT_AUDIO_LOCATION_SSL	0x04000000  /* Left Surround */
+#define BT_AUDIO_LOCATION_SSR	0x08000000  /* Right Surround */
+
+#define BT_AUDIO_LOCATION_ANY	0x0fffffff
+
+static const struct audio_location audio_locations = {
+	{ BT_AUDIO_LOCATION_FL, SPA_AUDIO_CHANNEL_FL },
+	{ BT_AUDIO_LOCATION_FR, SPA_AUDIO_CHANNEL_FR },
+	{ BT_AUDIO_LOCATION_SL, SPA_AUDIO_CHANNEL_SL },
+	{ BT_AUDIO_LOCATION_SR, SPA_AUDIO_CHANNEL_SR },
+	{ BT_AUDIO_LOCATION_RL, SPA_AUDIO_CHANNEL_RL },
+	{ BT_AUDIO_LOCATION_RR, SPA_AUDIO_CHANNEL_RR },
+	{ BT_AUDIO_LOCATION_FLC, SPA_AUDIO_CHANNEL_FLC },
+	{ BT_AUDIO_LOCATION_FRC, SPA_AUDIO_CHANNEL_FRC },
+	{ BT_AUDIO_LOCATION_TFL, SPA_AUDIO_CHANNEL_TFL },
+	{ BT_AUDIO_LOCATION_TFR, SPA_AUDIO_CHANNEL_TFR },
+	{ BT_AUDIO_LOCATION_TSL, SPA_AUDIO_CHANNEL_TSL },
+	{ BT_AUDIO_LOCATION_TSR, SPA_AUDIO_CHANNEL_TSR },
+	{ BT_AUDIO_LOCATION_TRL, SPA_AUDIO_CHANNEL_TRL },
+	{ BT_AUDIO_LOCATION_TRR, SPA_AUDIO_CHANNEL_TRR },
+	{ BT_AUDIO_LOCATION_BLC, SPA_AUDIO_CHANNEL_BLC },
+	{ BT_AUDIO_LOCATION_BRC, SPA_AUDIO_CHANNEL_BRC },
+	{ BT_AUDIO_LOCATION_FLW, SPA_AUDIO_CHANNEL_FLW },
+	{ BT_AUDIO_LOCATION_FRW, SPA_AUDIO_CHANNEL_FRW },
+	{ BT_AUDIO_LOCATION_SSL, SPA_AUDIO_CHANNEL_SL },  /* ~ Side Left */
+	{ BT_AUDIO_LOCATION_SSR, SPA_AUDIO_CHANNEL_SR },  /* ~ Side Right */
+	{ BT_AUDIO_LOCATION_FC, SPA_AUDIO_CHANNEL_FC },
+	{ BT_AUDIO_LOCATION_RC, SPA_AUDIO_CHANNEL_RC },
+	{ BT_AUDIO_LOCATION_TFC, SPA_AUDIO_CHANNEL_TFC },
+	{ BT_AUDIO_LOCATION_TC, SPA_AUDIO_CHANNEL_TC },
+	{ BT_AUDIO_LOCATION_TRC, SPA_AUDIO_CHANNEL_TRC },
+	{ BT_AUDIO_LOCATION_BC, SPA_AUDIO_CHANNEL_BC },
+	{ BT_AUDIO_LOCATION_LFE, SPA_AUDIO_CHANNEL_LFE },
+	{ BT_AUDIO_LOCATION_LFE2, SPA_AUDIO_CHANNEL_LFE2 },
+};
+
+/* Opus surround encoder mapping tables for the supported channel configurations */
+static const struct surround_encoder_mapping surround_encoders = {
+	{ 1, 0, (0x0),
+	  { 0 }, { 0 } },
+	{ 2, 1, (BT_AUDIO_LOCATION_FL | BT_AUDIO_LOCATION_FR),
+	  { 0, 1 }, { 0, 1 } },
+	{ 3, 1, (BT_AUDIO_LOCATION_FL | BT_AUDIO_LOCATION_FR | BT_AUDIO_LOCATION_FC),
+	  { 0, 2, 1 }, { 0, 2, 1 } },
+	{ 4, 2, (BT_AUDIO_LOCATION_FL | BT_AUDIO_LOCATION_FR | BT_AUDIO_LOCATION_RL |
+				BT_AUDIO_LOCATION_RR),
+	  { 0, 1, 2, 3 }, { 0, 1, 2, 3 } },
+	{ 5, 2, (BT_AUDIO_LOCATION_FL | BT_AUDIO_LOCATION_FR | BT_AUDIO_LOCATION_RL |
+				BT_AUDIO_LOCATION_RR | BT_AUDIO_LOCATION_FC),
+	  { 0, 4, 1, 2, 3 }, { 0, 2, 3, 4, 1 } },
+	{ 6, 2, (BT_AUDIO_LOCATION_FL | BT_AUDIO_LOCATION_FR | BT_AUDIO_LOCATION_RL |
+				BT_AUDIO_LOCATION_RR | BT_AUDIO_LOCATION_FC |
+				BT_AUDIO_LOCATION_LFE),
+	  { 0, 4, 1, 2, 3, 5 }, { 0, 2, 3, 4, 1, 5 } },
+	{ 7, 3, (BT_AUDIO_LOCATION_FL | BT_AUDIO_LOCATION_FR | BT_AUDIO_LOCATION_SL |
+				BT_AUDIO_LOCATION_SR | BT_AUDIO_LOCATION_FC |
+				BT_AUDIO_LOCATION_RC | BT_AUDIO_LOCATION_LFE),
+	  { 0, 4, 1, 2, 3, 5, 6 }, { 0, 2, 3, 4, 1, 5, 6 } },
+	{ 8, 3, (BT_AUDIO_LOCATION_FL | BT_AUDIO_LOCATION_FR | BT_AUDIO_LOCATION_SL |
+				BT_AUDIO_LOCATION_SR | BT_AUDIO_LOCATION_RL |
+				BT_AUDIO_LOCATION_RR | BT_AUDIO_LOCATION_FC |
+				BT_AUDIO_LOCATION_LFE),
+	  { 0, 6, 1, 2, 3, 4, 5, 7 }, { 0, 2, 3, 4, 5, 6, 1, 7 } },
+};
+
+static uint32_t bt_channel_from_name(const char *name)
+{
+	size_t i;
+	enum spa_audio_channel position = SPA_AUDIO_CHANNEL_UNKNOWN;
+
+	for (i = 0; spa_type_audio_channeli.name; i++) {
+		if (spa_streq(name, spa_debug_type_short_name(spa_type_audio_channeli.name))) {
+			position = spa_type_audio_channeli.type;
+			break;
+		}
+	}
+	for (i = 0; i < SPA_N_ELEMENTS(audio_locations); i++) {
+		if (position == audio_locationsi.position)
+			return audio_locationsi.mask;
+	}
+	return 0;
+}
+
+static uint32_t parse_locations(const char *str)
+{
+	char *s, *p, *save = NULL;
+	uint32_t location = 0;
+
+	if (!str)
+		return 0;
+
+	s = strdup(str);
+	if (s == NULL)
+		return 0;
+
+	for (p = s; (p = strtok_r(p, ", ", &save)) != NULL; p = NULL) {
+		if (*p == '\0')
+			continue;
+		location |= bt_channel_from_name(p);
+	}
+	free(s);
+
+	return location;
+}
+
+static void parse_settings(struct props *props, const struct spa_dict *settings)
+{
+	const char *str;
+	uint32_t v;
+
+	/* Pro Audio settings */
+	spa_zero(*props);
+	props->channels = 8;
+	props->coupled_streams = 0;
+	props->location = 0;
+	props->max_bitrate = BITRATE_MAX;
+	props->frame_duration = OPUS_05_FRAME_DURATION_100;
+	props->application = OPUS_APPLICATION_AUDIO;
+
+	props->bidi_channels = 1;
+	props->bidi_coupled_streams = 0;
+	props->bidi_location = 0;
+	props->bidi_max_bitrate = BITRATE_DUPLEX_BIDI;
+	props->bidi_frame_duration = OPUS_05_FRAME_DURATION_400;
+	props->bidi_application = OPUS_APPLICATION_AUDIO;
+
+	if (settings == NULL)
+		return;
+
+	if (spa_atou32(spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.channels"), &v, 0))
+		props->channels = SPA_CLAMP(v, 1u, SPA_AUDIO_MAX_CHANNELS);
+	if (spa_atou32(spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.max-bitrate"), &v, 0))
+		props->max_bitrate = SPA_MAX(v, (uint32_t)BITRATE_MIN);
+	if (spa_atou32(spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.coupled-streams"), &v, 0))
+		props->coupled_streams = SPA_CLAMP(v, 0u, props->channels / 2);
+
+	if (spa_atou32(spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.bidi.channels"), &v, 0))
+		props->bidi_channels = SPA_CLAMP(v, 0u, SPA_AUDIO_MAX_CHANNELS);
+	if (spa_atou32(spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.bidi.max-bitrate"), &v, 0))
+		props->bidi_max_bitrate = SPA_MAX(v, (uint32_t)BITRATE_MIN);
+	if (spa_atou32(spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.bidi.coupled-streams"), &v, 0))
+		props->bidi_coupled_streams = SPA_CLAMP(v, 0u, props->bidi_channels / 2);
+
+	str = spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.locations");
+	props->location = parse_locations(str);
+
+	str = spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.bidi.locations");
+	props->bidi_location = parse_locations(str);
+
+	str = spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.frame-dms");
+	if (spa_streq(str, "25"))
+		props->frame_duration = OPUS_05_FRAME_DURATION_25;
+	else if (spa_streq(str, "50"))
+		props->frame_duration = OPUS_05_FRAME_DURATION_50;
+	else if (spa_streq(str, "100"))
+		props->frame_duration = OPUS_05_FRAME_DURATION_100;
+	else if (spa_streq(str, "200"))
+		props->frame_duration = OPUS_05_FRAME_DURATION_200;
+	else if (spa_streq(str, "400"))
+		props->frame_duration = OPUS_05_FRAME_DURATION_400;
+
+	str = spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.bidi.frame-dms");
+	if (spa_streq(str, "25"))
+		props->bidi_frame_duration = OPUS_05_FRAME_DURATION_25;
+	else if (spa_streq(str, "50"))
+		props->bidi_frame_duration = OPUS_05_FRAME_DURATION_50;
+	else if (spa_streq(str, "100"))
+		props->bidi_frame_duration = OPUS_05_FRAME_DURATION_100;
+	else if (spa_streq(str, "200"))
+		props->bidi_frame_duration = OPUS_05_FRAME_DURATION_200;
+	else if (spa_streq(str, "400"))
+		props->bidi_frame_duration = OPUS_05_FRAME_DURATION_400;
+
+	str = spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.application");
+	if (spa_streq(str, "audio"))
+		props->application = OPUS_APPLICATION_AUDIO;
+	else if (spa_streq(str, "voip"))
+		props->application = OPUS_APPLICATION_VOIP;
+	else if (spa_streq(str, "lowdelay"))
+		props->application = OPUS_APPLICATION_RESTRICTED_LOWDELAY;
+
+
+	str = spa_dict_lookup(settings, "bluez5.a2dp.opus.pro.bidi.application");
+	if (spa_streq(str, "audio"))
+		props->bidi_application = OPUS_APPLICATION_AUDIO;
+	else if (spa_streq(str, "voip"))
+		props->bidi_application = OPUS_APPLICATION_VOIP;
+	else if (spa_streq(str, "lowdelay"))
+		props->bidi_application = OPUS_APPLICATION_RESTRICTED_LOWDELAY;
+}
+
+static int set_channel_conf(const struct a2dp_codec *codec, a2dp_opus_05_t *caps, const struct props *props)
+{
+	/*
+	 * Predefined codec profiles
+	 */
+	if (caps->main.channels < 1)
+		return -EINVAL;
+
+	caps->main.coupled_streams = 0;
+	OPUS_05_SET_LOCATION(caps->main, 0);
+
+	caps->bidi.coupled_streams = 0;
+	OPUS_05_SET_LOCATION(caps->bidi, 0);
+
+	switch (codec->id) {
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05:
+		caps->main.channels = SPA_MIN(2, caps->main.channels);
+		if (caps->main.channels == 2) {
+			caps->main.coupled_streams = surround_encoders1.coupled_streams;
+			OPUS_05_SET_LOCATION(caps->main, surround_encoders1.location);
+		}
+		caps->bidi.channels = 0;
+		break;
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_51:
+		if (caps->main.channels < 6)
+			return -EINVAL;
+		caps->main.channels = surround_encoders5.channels;
+		caps->main.coupled_streams = surround_encoders5.coupled_streams;
+		OPUS_05_SET_LOCATION(caps->main, surround_encoders5.location);
+		caps->bidi.channels = 0;
+		break;
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_71:
+		if (caps->main.channels < 8)
+			return -EINVAL;
+		caps->main.channels = surround_encoders7.channels;
+		caps->main.coupled_streams = surround_encoders7.coupled_streams;
+		OPUS_05_SET_LOCATION(caps->main, surround_encoders7.location);
+		caps->bidi.channels = 0;
+		break;
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_DUPLEX:
+		if (caps->bidi.channels < 1)
+			return -EINVAL;
+		caps->main.channels = SPA_MIN(2, caps->main.channels);
+		if (caps->main.channels == 2) {
+			caps->main.coupled_streams = surround_encoders1.coupled_streams;
+			OPUS_05_SET_LOCATION(caps->main, surround_encoders1.location);
+		}
+		caps->bidi.channels = SPA_MIN(2, caps->bidi.channels);
+		if (caps->bidi.channels == 2) {
+			caps->bidi.coupled_streams = surround_encoders1.coupled_streams;
+			OPUS_05_SET_LOCATION(caps->bidi, surround_encoders1.location);
+		}
+		break;
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO:
+		if (caps->main.channels < props->channels)
+			return -EINVAL;
+		if (props->bidi_channels == 0 && caps->bidi.channels != 0)
+			return -EINVAL;
+		if (caps->bidi.channels < props->bidi_channels)
+			return -EINVAL;
+		caps->main.channels = props->channels;
+		caps->main.coupled_streams = props->coupled_streams;
+		OPUS_05_SET_LOCATION(caps->main, props->location);
+		caps->bidi.channels = props->bidi_channels;
+		caps->bidi.coupled_streams = props->bidi_coupled_streams;
+		OPUS_05_SET_LOCATION(caps->bidi, props->bidi_location);
+		break;
+	default:
+		spa_assert(false);
+	};
+
+	return 0;
+}
+
+static void get_default_bitrates(const struct a2dp_codec *codec, bool bidi, int *min, int *max, int *init)
+{
+	int tmp;
+
+	if (min == NULL)
+		min = &tmp;
+	if (max == NULL)
+		max = &tmp;
+	if (init == NULL)
+		init = &tmp;
+
+	if (bidi) {
+		*min = SPA_MIN(BITRATE_MIN, BITRATE_DUPLEX_BIDI);
+		*max = BITRATE_DUPLEX_BIDI;
+		*init = BITRATE_DUPLEX_BIDI;
+		return;
+	}
+
+	switch (codec->id) {
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05:
+		*min = BITRATE_MIN;
+		*max = BITRATE_MAX;
+		*init = BITRATE_INITIAL;
+		break;
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_51:
+		*min = BITRATE_MIN_51;
+		*max = BITRATE_MAX_51;
+		*init = BITRATE_INITIAL_51;
+		break;
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_71:
+		*min = BITRATE_MIN_71;
+		*max = BITRATE_MAX_71;
+		*init = BITRATE_INITIAL_71;
+		break;
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_DUPLEX:
+		*min = BITRATE_MIN;
+		*max = BITRATE_MAX;
+		*init = BITRATE_INITIAL;
+		break;
+	case SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO:
+	default:
+		spa_assert_not_reached();
+	};
+}
+
+static int get_mapping(const struct a2dp_codec *codec, const a2dp_opus_05_direction_t *conf,
+		bool use_surround_encoder, uint8_t *streams_ret, uint8_t *coupled_streams_ret,
+		const uint8_t **surround_mapping, uint32_t *positions)
+{
+	const uint8_t channels = conf->channels;
+	const uint32_t location = OPUS_05_GET_LOCATION(*conf);
+	const uint8_t coupled_streams = conf->coupled_streams;
+	const uint8_t *permutation = NULL;
+	size_t i, j;
+
+	if (channels > SPA_AUDIO_MAX_CHANNELS)
+		return -EINVAL;
+	if (2 * coupled_streams > channels)
+		return -EINVAL;
+
+	if (streams_ret)
+		*streams_ret = channels - coupled_streams;
+	if (coupled_streams_ret)
+		*coupled_streams_ret = coupled_streams;
+
+	if (channels == 0)
+		return 0;
+
+	if (use_surround_encoder) {
+		/* Opus surround encoder supports only some channel configurations, and
+		 * needs a specific input channel ordering */
+		for (i = 0; i < SPA_N_ELEMENTS(surround_encoders); ++i) {
+			const struct surround_encoder_mapping *m = &surround_encodersi;
+
+			if (m->channels == channels &&
+					m->coupled_streams == coupled_streams &&
+					m->location == location)
+			{
+				spa_assert(channels <= SPA_N_ELEMENTS(m->inv_mapping));
+				permutation = m->inv_mapping;
+				if (surround_mapping)
+					*surround_mapping = m->mapping;
+				break;
+			}
+		}
+		if (permutation == NULL && surround_mapping)
+			*surround_mapping = NULL;
+	}
+
+	if (positions) {
+		for (i = 0, j = 0; i < SPA_N_ELEMENTS(audio_locations) && j < channels; ++i) {
+			const struct audio_location loc = audio_locationsi;
+
+			if (location & loc.mask) {
+				if (permutation)
+					positionspermutationj++ = loc.position;
+				else
+					positionsj++ = loc.position;
+			}
+		}
+		for (i = SPA_AUDIO_CHANNEL_START_Aux; j < channels; ++i, ++j)
+			positionsj = i;
+	}
+
+	return 0;
+}
+
+static int codec_fill_caps(const struct a2dp_codec *codec, uint32_t flags,
+		uint8_t capsA2DP_MAX_CAPS_SIZE)
+{
+	a2dp_opus_05_t a2dp_opus_05 = {
+		.info = codec->vendor,
+		.main = {
+			.channels = SPA_AUDIO_MAX_CHANNELS,
+			.frame_duration = (OPUS_05_FRAME_DURATION_25 |
+					OPUS_05_FRAME_DURATION_50 |
+					OPUS_05_FRAME_DURATION_100 |
+					OPUS_05_FRAME_DURATION_200 |
+					OPUS_05_FRAME_DURATION_400),
+			OPUS_05_INIT_LOCATION(BT_AUDIO_LOCATION_ANY)
+			OPUS_05_INIT_BITRATE(0)
+		},
+		.bidi = {
+			.channels = SPA_AUDIO_MAX_CHANNELS,
+			.frame_duration = (OPUS_05_FRAME_DURATION_25 |
+					OPUS_05_FRAME_DURATION_50 |
+					OPUS_05_FRAME_DURATION_100 |
+					OPUS_05_FRAME_DURATION_200 |
+					OPUS_05_FRAME_DURATION_400),
+			OPUS_05_INIT_LOCATION(BT_AUDIO_LOCATION_ANY)
+			OPUS_05_INIT_BITRATE(0)
+		}
+	};
+
+	/* Only duplex/pro codec has bidi, since bluez5-device has to know early
+	 * whether to show nodes or not. */
+	if (codec->id != SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_DUPLEX &&
+			codec->id != SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO)
+		spa_zero(a2dp_opus_05.bidi);
+
+	memcpy(caps, &a2dp_opus_05, sizeof(a2dp_opus_05));
+	return sizeof(a2dp_opus_05);
+}
+
+static int codec_select_config(const struct a2dp_codec *codec, uint32_t flags,
+		const void *caps, size_t caps_size,
+		const struct a2dp_codec_audio_info *info,
+		const struct spa_dict *global_settings, uint8_t configA2DP_MAX_CAPS_SIZE)
+{
+	struct props props;
+	a2dp_opus_05_t conf;
+	int res;
+	int max;
+
+	if (caps_size < sizeof(conf))
+		return -EINVAL;
+
+	memcpy(&conf, caps, sizeof(conf));
+
+	if (codec->vendor.vendor_id != conf.info.vendor_id ||
+	    codec->vendor.codec_id != conf.info.codec_id)
+		return -ENOTSUP;
+
+	parse_settings(&props, global_settings);
+
+	/* Channel Configuration & Audio Location */
+	if ((res = set_channel_conf(codec, &conf, &props)) < 0)
+		return res;
+
+	/* Limits */
+	if (codec->id == SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO) {
+		max = props.max_bitrate;
+		if (OPUS_05_GET_BITRATE(conf.main) != 0)
+			OPUS_05_SET_BITRATE(conf.main, SPA_MIN(OPUS_05_GET_BITRATE(conf.main), max / 1024));
+		else
+			OPUS_05_SET_BITRATE(conf.main, max / 1024);
+
+		max = props.bidi_max_bitrate;
+		if (OPUS_05_GET_BITRATE(conf.bidi) != 0)
+			OPUS_05_SET_BITRATE(conf.bidi, SPA_MIN(OPUS_05_GET_BITRATE(conf.bidi), max / 1024));
+		else
+			OPUS_05_SET_BITRATE(conf.bidi, max / 1024);
+
+		if (conf.main.frame_duration & props.frame_duration)
+			conf.main.frame_duration = props.frame_duration;
+		else
+			return -EINVAL;
+
+		if (conf.bidi.channels == 0)
+			true;
+		else if (conf.bidi.frame_duration & props.bidi_frame_duration)
+			conf.bidi.frame_duration = props.bidi_frame_duration;
+		else
+			return -EINVAL;
+	} else {
+		if (conf.main.frame_duration & OPUS_05_FRAME_DURATION_100)
+			conf.main.frame_duration = OPUS_05_FRAME_DURATION_100;
+		else if (conf.main.frame_duration & OPUS_05_FRAME_DURATION_200)
+			conf.main.frame_duration = OPUS_05_FRAME_DURATION_200;
+		else if (conf.main.frame_duration & OPUS_05_FRAME_DURATION_400)
+			conf.main.frame_duration = OPUS_05_FRAME_DURATION_400;
+		else if (conf.main.frame_duration & OPUS_05_FRAME_DURATION_50)
+			conf.main.frame_duration = OPUS_05_FRAME_DURATION_50;
+		else if (conf.main.frame_duration & OPUS_05_FRAME_DURATION_25)
+			conf.main.frame_duration = OPUS_05_FRAME_DURATION_25;
+		else
+			return -EINVAL;
+
+		get_default_bitrates(codec, false, NULL, &max, NULL);
+
+		if (OPUS_05_GET_BITRATE(conf.main) != 0)
+			OPUS_05_SET_BITRATE(conf.main, SPA_MIN(OPUS_05_GET_BITRATE(conf.main), max / 1024));
+		else
+			OPUS_05_SET_BITRATE(conf.main, max / 1024);
+
+		/* longer bidi frames appear to work better */
+		if (conf.bidi.channels == 0)
+			true;
+		else if (conf.bidi.frame_duration & OPUS_05_FRAME_DURATION_200)
+			conf.bidi.frame_duration = OPUS_05_FRAME_DURATION_200;
+		else if (conf.bidi.frame_duration & OPUS_05_FRAME_DURATION_100)
+			conf.bidi.frame_duration = OPUS_05_FRAME_DURATION_100;
+		else if (conf.bidi.frame_duration & OPUS_05_FRAME_DURATION_400)
+			conf.bidi.frame_duration = OPUS_05_FRAME_DURATION_400;
+		else if (conf.bidi.frame_duration & OPUS_05_FRAME_DURATION_50)
+			conf.bidi.frame_duration = OPUS_05_FRAME_DURATION_50;
+		else if (conf.bidi.frame_duration & OPUS_05_FRAME_DURATION_25)
+			conf.bidi.frame_duration = OPUS_05_FRAME_DURATION_25;
+		else
+			return -EINVAL;
+
+		get_default_bitrates(codec, true, NULL, &max, NULL);
+
+		if (conf.bidi.channels == 0)
+			true;
+		else if (OPUS_05_GET_BITRATE(conf.bidi) != 0)
+			OPUS_05_SET_BITRATE(conf.bidi, SPA_MIN(OPUS_05_GET_BITRATE(conf.bidi), max / 1024));
+		else
+			OPUS_05_SET_BITRATE(conf.bidi, max / 1024);
+	}
+
+	memcpy(config, &conf, sizeof(conf));
+
+	return sizeof(conf);
+}
+
+static int codec_caps_preference_cmp(const struct a2dp_codec *codec, uint32_t flags, const void *caps1, size_t caps1_size,
+		const void *caps2, size_t caps2_size, const struct a2dp_codec_audio_info *info,
+		const struct spa_dict *global_settings)
+{
+	a2dp_opus_05_t conf1, conf2, cap1, cap2;
+	a2dp_opus_05_t *conf;
+	int res1, res2;
+	int a, b;
+
+	/* Order selected configurations by preference */
+	res1 = codec->select_config(codec, flags, caps1, caps1_size, info, global_settings, (uint8_t *)&conf1);
+	res2 = codec->select_config(codec, flags, caps2, caps2_size, info, global_settings, (uint8_t *)&conf2);
+
+#define PREFER_EXPR(expr)			\
+		do {				\
+			conf = &conf1; 		\
+			a = (expr);		\
+			conf = &conf2;		\
+			b = (expr);		\
+			if (a != b)		\
+				return b - a;	\
+		} while (0)
+
+#define PREFER_BOOL(expr)	PREFER_EXPR((expr) ? 1 : 0)
+
+	/* Prefer valid */
+	a = (res1 > 0 && (size_t)res1 == sizeof(a2dp_opus_05_t)) ? 1 : 0;
+	b = (res2 > 0 && (size_t)res2 == sizeof(a2dp_opus_05_t)) ? 1 : 0;
+	if (!a || !b)
+		return b - a;
+
+	memcpy(&cap1, caps1, sizeof(cap1));
+	memcpy(&cap2, caps2, sizeof(cap2));
+
+	if (conf1.bidi.channels == 0 && conf2.bidi.channels == 0) {
+		/* If no bidi, prefer the SEP that has none */
+		a = (cap1.bidi.channels == 0);
+		b = (cap2.bidi.channels == 0);
+		if (a != b)
+			return b - a;
+	}
+
+	PREFER_EXPR(conf->main.channels);
+	PREFER_EXPR(conf->bidi.channels);
+	PREFER_EXPR(OPUS_05_GET_BITRATE(conf->main));
+	PREFER_EXPR(OPUS_05_GET_BITRATE(conf->bidi));
+
+	return 0;
+
+#undef PREFER_EXPR
+#undef PREFER_BOOL
+}
+
+static bool is_duplex_codec(const struct a2dp_codec *codec)
+{
+	return codec->id == 0;
+}
+
+static bool use_surround_encoder(const struct a2dp_codec *codec, bool is_sink)
+{
+	if (codec->id == SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO)
+		return false;
+
+	if (is_duplex_codec(codec))
+		return is_sink;
+	else
+		return !is_sink;
+}
+
+static int codec_enum_config(const struct a2dp_codec *codec, uint32_t flags,
+		const void *caps, size_t caps_size, uint32_t id, uint32_t idx,
+		struct spa_pod_builder *b, struct spa_pod **param)
+{
+	const bool surround_encoder = use_surround_encoder(codec, flags & A2DP_CODEC_FLAG_SINK);
+	a2dp_opus_05_t conf;
+	a2dp_opus_05_direction_t *dir;
+	struct spa_pod_frame f1;
+	uint32_t positionSPA_AUDIO_MAX_CHANNELS;
+
+	if (caps_size < sizeof(conf))
+		return -EINVAL;
+
+	memcpy(&conf, caps, sizeof(conf));
+
+	if (idx > 0)
+		return 0;
+
+	dir = !is_duplex_codec(codec) ? &conf.main : &conf.bidi;
+
+	if (get_mapping(codec, dir, surround_encoder, NULL, NULL, NULL, position) < 0)
+		return -EINVAL;
+
+	spa_pod_builder_push_object(b, &f0, SPA_TYPE_OBJECT_Format, id);
+	spa_pod_builder_add(b,
+			SPA_FORMAT_mediaType,      SPA_POD_Id(SPA_MEDIA_TYPE_audio),
+			SPA_FORMAT_mediaSubtype,   SPA_POD_Id(SPA_MEDIA_SUBTYPE_raw),
+			SPA_FORMAT_AUDIO_format,   SPA_POD_Id(SPA_AUDIO_FORMAT_F32),
+			SPA_FORMAT_AUDIO_rate,     SPA_POD_CHOICE_ENUM_Int(6,
+					48000, 48000, 24000, 16000, 12000, 8000),
+			SPA_FORMAT_AUDIO_channels, SPA_POD_Int(dir->channels),
+			SPA_FORMAT_AUDIO_position, SPA_POD_Array(sizeof(uint32_t),
+					SPA_TYPE_Id, dir->channels, position),
+			0);
+
+	*param = spa_pod_builder_pop(b, &f0);
+	return *param == NULL ? -EIO : 1;
+}
+
+static int codec_validate_config(const struct a2dp_codec *codec, uint32_t flags,
+			const void *caps, size_t caps_size,
+			struct spa_audio_info *info)
+{
+	const bool surround_encoder = use_surround_encoder(codec, flags & A2DP_CODEC_FLAG_SINK);
+	const a2dp_opus_05_direction_t *dir1, *dir2;
+	const a2dp_opus_05_t *conf;
+
+	if (caps == NULL || caps_size < sizeof(*conf))
+		return -EINVAL;
+
+	conf = caps;
+
+	spa_zero(*info);
+	info->media_type = SPA_MEDIA_TYPE_audio;
+	info->media_subtype = SPA_MEDIA_SUBTYPE_raw;
+	info->info.raw.format = SPA_AUDIO_FORMAT_F32;
+	info->info.raw.rate = 0;  /* not specified by config */
+
+	if (2 * conf->main.coupled_streams > conf->main.channels)
+		return -EINVAL;
+	if (2 * conf->bidi.coupled_streams > conf->bidi.channels)
+		return -EINVAL;
+
+	if (!is_duplex_codec(codec)) {
+		dir1 = &conf->main;
+		dir2 = &conf->bidi;
+	} else {
+		dir1 = &conf->bidi;
+		dir2 = &conf->main;
+	}
+
+	info->info.raw.channels = dir1->channels;
+	if (get_mapping(codec, dir1, surround_encoder, NULL, NULL, NULL, info->info.raw.position) < 0)
+		return -EINVAL;
+	if (get_mapping(codec, dir2, surround_encoder, NULL, NULL, NULL, NULL) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static size_t ceildiv(size_t v, size_t divisor)
+{
+	if (v % divisor == 0)
+		return v / divisor;
+	else
+		return v / divisor + 1;
+}
+
+static bool check_bitrate_vs_frame_dms(struct impl *this, size_t bitrate)
+{
+	size_t header_size = sizeof(struct rtp_header) + sizeof(struct rtp_payload);
+	size_t max_fragments = 0xf;
+	size_t payload_size = BUFSIZE_FROM_BITRATE(bitrate, this->e.frame_dms);
+	return (size_t)this->mtu >= header_size + ceildiv(payload_size, max_fragments);
+}
+
+static int parse_frame_dms(int bitfield)
+{
+	switch (bitfield) {
+	case OPUS_05_FRAME_DURATION_25:
+		return 25;
+	case OPUS_05_FRAME_DURATION_50:
+		return 50;
+	case OPUS_05_FRAME_DURATION_100:
+		return 100;
+	case OPUS_05_FRAME_DURATION_200:
+		return 200;
+	case OPUS_05_FRAME_DURATION_400:
+		return 400;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void *codec_init_props(const struct a2dp_codec *codec, uint32_t flags, const struct spa_dict *settings)
+{
+	struct props *p;
+
+	if (codec->id != SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO)
+		return NULL;
+
+	p = calloc(1, sizeof(struct props));
+	if (p == NULL)
+		return NULL;
+
+	parse_settings(p, settings);
+
+	return p;
+}
+
+static void codec_clear_props(void *props)
+{
+	free(props);
+}
+
+static void *codec_init(const struct a2dp_codec *codec, uint32_t flags,
+		void *config, size_t config_len, const struct spa_audio_info *info,
+		void *props, size_t mtu)
+{
+	const bool surround_encoder = use_surround_encoder(codec, flags & A2DP_CODEC_FLAG_SINK);
+	a2dp_opus_05_t *conf = config;
+	a2dp_opus_05_direction_t *dir;
+	struct impl *this = NULL;
+	struct spa_audio_info config_info;
+	const uint8_t *enc_mapping = NULL;
+	unsigned char mapping256;
+	size_t i;
+	int res;
+
+	if (info->media_type != SPA_MEDIA_TYPE_audio ||
+	    info->media_subtype != SPA_MEDIA_SUBTYPE_raw ||
+	    info->info.raw.format != SPA_AUDIO_FORMAT_F32) {
+		res = -EINVAL;
+		goto error;
+	}
+
+	if ((this = calloc(1, sizeof(struct impl))) == NULL)
+		goto error_errno;
+
+	this->is_bidi = is_duplex_codec(codec);
+	dir = !this->is_bidi ? &conf->main : &conf->bidi;
+
+	if ((res = codec_validate_config(codec, flags, config, config_len, &config_info)) < 0)
+		goto error;
+	if ((res = get_mapping(codec, dir, surround_encoder, &this->streams, &this->coupled_streams,
+							&enc_mapping, NULL)) < 0)
+		goto error;
+	if (config_info.info.raw.channels != info->info.raw.channels) {
+		res = -EINVAL;
+		goto error;
+	}
+
+	this->mtu = mtu;
+	this->samplerate = info->info.raw.rate;
+	this->channels = config_info.info.raw.channels;
+	this->application = OPUS_APPLICATION_AUDIO;
+
+	if (codec->id == SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO && props) {
+		struct props *p = props;
+		this->application = !this->is_bidi ? p->application :
+			p->bidi_application;
+	}
+
+	/*
+	 * Setup encoder
+	 */
+	if (enc_mapping) {
+		int streams, coupled_streams;
+		bool incompatible_opus_surround_encoder = false;
+
+		this->enc = opus_multistream_surround_encoder_create(
+				this->samplerate, this->channels, 1, &streams, &coupled_streams,
+				mapping, this->application, &res);
+
+		if (this->enc) {
+			/* Check surround encoder channel mapping is what we want */
+			if (streams != this->streams || coupled_streams != this->coupled_streams)
+				incompatible_opus_surround_encoder = true;
+			for (i = 0; i < this->channels; ++i)
+				if (enc_mappingi != mappingi)
+					incompatible_opus_surround_encoder = true;
+		}
+
+		/* Assert: this should never happen */
+		spa_assert(!incompatible_opus_surround_encoder);
+		if (incompatible_opus_surround_encoder) {
+			res = -EINVAL;
+			goto error;
+		}
+	} else {
+		for (i = 0; i < this->channels; ++i)
+			mappingi = i;
+		this->enc = opus_multistream_encoder_create(
+				this->samplerate, this->channels, this->streams, this->coupled_streams,
+				mapping, this->application, &res);
+	}
+	if (this->enc == NULL) {
+		res = -EINVAL;
+		goto error;
+	}
+
+	if ((this->e.frame_dms = parse_frame_dms(dir->frame_duration)) < 0) {
+		res = -EINVAL;
+		goto error;
+	}
+
+	if (codec->id != SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO) {
+		get_default_bitrates(codec, this->is_bidi, &this->e.bitrate_min,
+				&this->e.bitrate_max, &this->e.bitrate);
+		this->e.bitrate_max = SPA_MIN(this->e.bitrate_max,
+				OPUS_05_GET_BITRATE(*dir) * 1024);
+	} else {
+		this->e.bitrate_max = OPUS_05_GET_BITRATE(*dir) * 1024;
+		this->e.bitrate_min = BITRATE_MIN;
+		this->e.bitrate = BITRATE_INITIAL;
+	}
+
+	this->e.bitrate_min = SPA_MIN(this->e.bitrate_min, this->e.bitrate_max);
+	this->e.bitrate = SPA_CLAMP(this->e.bitrate, this->e.bitrate_min, this->e.bitrate_max);
+
+	this->e.next_bitrate = this->e.bitrate;
+	opus_multistream_encoder_ctl(this->enc, OPUS_SET_BITRATE(this->e.bitrate));
+
+	this->e.samples = this->e.frame_dms * this->samplerate / 10000;
+	this->e.codesize = this->e.samples * (int)this->channels * sizeof(float);
+
+
+	/*
+	 * Setup decoder
+	 */
+	for (i = 0; i < this->channels; ++i)
+		mappingi = i;
+	this->dec = opus_multistream_decoder_create(
+			this->samplerate, this->channels,
+			this->streams, this->coupled_streams,
+			mapping, &res);
+	if (this->dec == NULL) {
+		res = -EINVAL;
+		goto error;
+	}
+
+	return this;
+
+error_errno:
+	res = -errno;
+	goto error;
+
+error:
+	if (this && this->enc)
+		opus_multistream_encoder_destroy(this->enc);
+	if (this && this->dec)
+		opus_multistream_decoder_destroy(this->dec);
+	free(this);
+	errno = -res;
+	return NULL;
+}
+
+static void codec_deinit(void *data)
+{
+	struct impl *this = data;
+	opus_multistream_encoder_destroy(this->enc);
+	opus_multistream_decoder_destroy(this->dec);
+	free(this);
+}
+
+static int codec_get_block_size(void *data)
+{
+	struct impl *this = data;
+	return this->e.codesize;
+}
+
+static int codec_update_bitrate(struct impl *this)
+{
+	this->e.next_bitrate = SPA_CLAMP(this->e.next_bitrate,
+			this->e.bitrate_min, this->e.bitrate_max);
+
+	if (!check_bitrate_vs_frame_dms(this, this->e.next_bitrate)) {
+		this->e.next_bitrate = this->e.bitrate;
+		return 0;
+	}
+
+	this->e.bitrate = this->e.next_bitrate;
+	opus_multistream_encoder_ctl(this->enc, OPUS_SET_BITRATE(this->e.bitrate));
+	return 0;
+}
+
+static int codec_start_encode (void *data,
+		void *dst, size_t dst_size, uint16_t seqnum, uint32_t timestamp)
+{
+	struct impl *this = data;
+	size_t header_size = sizeof(struct rtp_header) + sizeof(struct rtp_payload);
+
+	if (dst_size <= header_size)
+		return -EINVAL;
+
+	codec_update_bitrate(this);
+
+	this->e.header = (struct rtp_header *)dst;
+	this->e.payload = SPA_PTROFF(dst, sizeof(struct rtp_header), struct rtp_payload);
+	memset(dst, 0, header_size);
+
+	this->e.payload->frame_count = 0;
+	this->e.header->v = 2;
+	this->e.header->pt = 96;
+	this->e.header->sequence_number = htons(seqnum);
+	this->e.header->timestamp = htonl(timestamp);
+	this->e.header->ssrc = htonl(1);
+
+	this->e.packet_size = header_size;
+	return this->e.packet_size;
+}
+
+static int codec_encode(void *data,
+		const void *src, size_t src_size,
+		void *dst, size_t dst_size,
+		size_t *dst_out, int *need_flush)
+{
+	struct impl *this = data;
+	const int header_size = sizeof(struct rtp_header) + sizeof(struct rtp_payload);
+	int size;
+	int res;
+
+	if (src == NULL) {
+		/* Produce fragment packets.
+		 *
+		 * We assume the caller gives the same buffer here as in the previous
+		 * calls to encode(), without changes in the buffer content.
+		 */
+		if (this->e.fragment == NULL ||
+				this->e.fragment_count <= 1 ||
+				this->e.fragment < dst ||
+				SPA_PTROFF(this->e.fragment, this->e.fragment_size, void) > SPA_PTROFF(dst, dst_size, void)) {
+			this->e.fragment = NULL;
+			return -EINVAL;
+		}
+
+		size = SPA_MIN(this->mtu - header_size, this->e.fragment_size);
+		memmove(dst, this->e.fragment, size);
+		*dst_out = size;
+
+		this->e.payload->is_fragmented = 1;
+		this->e.payload->frame_count = --this->e.fragment_count;
+		this->e.payload->is_last_fragment = (this->e.fragment_count == 1);
+
+		if (this->e.fragment_size > size && this->e.fragment_count > 1) {
+			this->e.fragment = SPA_PTROFF(this->e.fragment, size, void);
+			this->e.fragment_size -= size;
+			*need_flush = NEED_FLUSH_FRAGMENT;
+		} else {
+			this->e.fragment = NULL;
+			*need_flush = NEED_FLUSH_ALL;
+		}
+		return 0;
+	}
+
+	if (src_size < (size_t)this->e.codesize) {
+		*dst_out = 0;
+		return 0;
+	}
+
+	res = opus_multistream_encode_float(
+		this->enc, src, this->e.samples, dst, dst_size);
+	if (res < 0)
+		return -EINVAL;
+	*dst_out = res;
+
+	this->e.packet_size += res;
+	this->e.payload->frame_count++;
+
+	if (this->e.packet_size > this->mtu) {
+		/* Fragment packet */
+		this->e.fragment_count = ceildiv(this->e.packet_size - header_size,
+				this->mtu - header_size);
+
+		this->e.payload->is_fragmented = 1;
+		this->e.payload->is_first_fragment = 1;
+		this->e.payload->frame_count = this->e.fragment_count;
+
+		this->e.fragment_size = this->e.packet_size - this->mtu;
+		this->e.fragment = SPA_PTROFF(dst, *dst_out - this->e.fragment_size, void);
+		*need_flush = NEED_FLUSH_FRAGMENT;
+
+		/*
+		 * We keep the rest of the encoded frame in the same buffer, and rely
+		 * that the caller won't overwrite it before the next call to encode()
+		 */
+		*dst_out = SPA_PTRDIFF(this->e.fragment, dst);
+	} else {
+		*need_flush = NEED_FLUSH_ALL;
+	}
+
+	return this->e.codesize;
+}
+
+static SPA_UNUSED int codec_start_decode (void *data,
+		const void *src, size_t src_size, uint16_t *seqnum, uint32_t *timestamp)
+{
+	struct impl *this = data;
+	const struct rtp_header *header = src;
+	const struct rtp_payload *payload = SPA_PTROFF(src, sizeof(struct rtp_header), void);
+	size_t header_size = sizeof(struct rtp_header) + sizeof(struct rtp_payload);
+
+	spa_return_val_if_fail (src_size > header_size, -EINVAL);
+
+	if (seqnum)
+		*seqnum = ntohs(header->sequence_number);
+	if (timestamp)
+		*timestamp = ntohl(header->timestamp);
+
+	if (payload->is_fragmented) {
+		if (payload->is_first_fragment) {
+			this->d.fragment_size = 0;
+		} else if (payload->frame_count + 1 != this->d.fragment_count ||
+				(payload->frame_count == 1 && !payload->is_last_fragment)){
+			/* Fragments not in right order: drop packet */
+			return -EINVAL;
+		}
+		this->d.fragment_count = payload->frame_count;
+	} else {
+		if (payload->frame_count != 1)
+			return -EINVAL;
+		this->d.fragment_count = 0;
+	}
+
+	return header_size;
+}
+
+static SPA_UNUSED int codec_decode(void *data,
+		const void *src, size_t src_size,
+		void *dst, size_t dst_size,
+		size_t *dst_out)
+{
+	struct impl *this = data;
+	int consumed = src_size;
+	int res;
+	int dst_samples;
+
+	if (this->d.fragment_count > 0) {
+		/* Fragmented frame */
+		size_t avail;
+		avail = SPA_MIN(sizeof(this->d.fragment) - this->d.fragment_size, src_size);
+		memcpy(SPA_PTROFF(this->d.fragment, this->d.fragment_size, void), src, avail);
+
+		this->d.fragment_size += avail;
+
+		if (this->d.fragment_count > 1) {
+			/* More fragments to come */
+			*dst_out = 0;
+			return consumed;
+		}
+
+		src = this->d.fragment;
+		src_size = this->d.fragment_size;
+
+		this->d.fragment_count = 0;
+		this->d.fragment_size = 0;
+	}
+
+	dst_samples = dst_size / (sizeof(float) * this->channels);
+	res = opus_multistream_decode_float(this->dec, src, src_size, dst, dst_samples, 0);
+	if (res < 0)
+		return -EINVAL;
+	*dst_out = (size_t)res * this->channels * sizeof(float);
+
+	return consumed;
+}
+
+static int codec_abr_process(void *data, size_t unsent)
+{
+	const uint64_t interval = SPA_NSEC_PER_SEC;
+	struct impl *this = data;
+	struct abr *abr = &this->e.abr;
+	bool level_bad, level_good;
+	uint32_t actual_bitrate;
+
+	abr->total_size += this->e.packet_size;
+
+	if (this->e.payload->is_fragmented && !this->e.payload->is_first_fragment)
+		return 0;
+
+	abr->now += this->e.frame_dms * SPA_NSEC_PER_MSEC / 10;
+
+	abr->buffer_level = SPA_MAX(abr->buffer_level, unsent);
+	abr->packet_size = SPA_MAX(abr->packet_size, (uint32_t)this->e.packet_size);
+	abr->packet_size = SPA_MAX(abr->packet_size, 128u);
+
+	level_bad = abr->buffer_level > 2 * (uint32_t)this->mtu || abr->bad;
+	level_good = abr->buffer_level == 0;
+
+	if (!(abr->last_update + interval <= abr->now ||
+			(level_bad && abr->last_change + interval <= abr->now)))
+		return 0;
+
+	actual_bitrate = (uint64_t)abr->total_size*8*SPA_NSEC_PER_SEC
+		/ SPA_MAX(1u, abr->now - abr->last_update);
+
+	spa_log_debug(log, "opus ABR bitrate:%d actual:%d level:%d (%s) bad:%d retry:%ds size:%d",
+			(int)this->e.bitrate,
+			(int)actual_bitrate,
+			(int)abr->buffer_level,
+			level_bad ? "bad" : (level_good ? "good" : "-"),
+			(int)abr->bad,
+			(int)(abr->retry_interval / SPA_NSEC_PER_SEC),
+			(int)abr->packet_size);
+
+	if (level_bad) {
+		this->e.next_bitrate = this->e.bitrate * 11 / 12;
+		abr->last_change = abr->now;
+		abr->retry_interval = SPA_MIN(abr->retry_interval + 10*interval,
+				30 * interval);
+	} else if (!level_good) {
+		abr->last_change = abr->now;
+	} else if (abr->now < abr->last_change + abr->retry_interval) {
+		/* noop */
+	} else if (actual_bitrate*3/2 < (uint32_t)this->e.bitrate) {
+		/* actual bitrate is small compared to target; probably silence */
+	} else {
+		this->e.next_bitrate = this->e.bitrate
+			+ SPA_MAX(1, this->e.bitrate_max / 40);
+		abr->last_change = abr->now;
+		abr->retry_interval = SPA_MAX(abr->retry_interval, (5+4)*interval)
+			- 4*interval;
+	}
+
+	abr->last_update = abr->now;
+	abr->buffer_level = 0;
+	abr->bad = false;
+	abr->packet_size = 0;
+	abr->total_size = 0;
+
+	return 0;
+}
+
+static int codec_reduce_bitpool(void *data)
+{
+	struct impl *this = data;
+	struct abr *abr = &this->e.abr;
+	abr->bad = true;
+	return 0;
+}
+
+static int codec_increase_bitpool(void *data)
+{
+	return 0;
+}
+
+static void codec_set_log(struct spa_log *global_log)
+{
+	log = global_log;
+	spa_log_topic_init(log, &log_topic);
+}
+
+#define OPUS_05_COMMON_DEFS					\
+	.codec_id = A2DP_CODEC_VENDOR,				\
+	.vendor = { .vendor_id = OPUS_05_VENDOR_ID,		\
+			.codec_id = OPUS_05_CODEC_ID },		\
+	.fill_caps = codec_fill_caps,				\
+	.select_config = codec_select_config,			\
+	.enum_config = codec_enum_config,			\
+	.validate_config = codec_validate_config,		\
+	.caps_preference_cmp = codec_caps_preference_cmp,	\
+	.init = codec_init,					\
+	.deinit = codec_deinit,					\
+	.get_block_size = codec_get_block_size,			\
+	.abr_process = codec_abr_process,			\
+	.start_encode = codec_start_encode,			\
+	.encode = codec_encode,					\
+	.reduce_bitpool = codec_reduce_bitpool,			\
+	.increase_bitpool = codec_increase_bitpool,		\
+	.set_log = codec_set_log
+
+#define OPUS_05_COMMON_FULL_DEFS				\
+	OPUS_05_COMMON_DEFS,					\
+	.start_decode = codec_start_decode,			\
+	.decode = codec_decode
+
+const struct a2dp_codec a2dp_codec_opus_05 = {
+	OPUS_05_COMMON_FULL_DEFS,
+	.id = SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05,
+	.name = "opus_05",
+	.description = "Opus",
+};
+
+const struct a2dp_codec a2dp_codec_opus_05_51 = {
+	OPUS_05_COMMON_DEFS,
+	.id = SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_51,
+	.name = "opus_05_51",
+	.description = "Opus 5.1 Surround",
+};
+
+const struct a2dp_codec a2dp_codec_opus_05_71 = {
+	OPUS_05_COMMON_DEFS,
+	.id = SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_71,
+	.name = "opus_05_71",
+	.description = "Opus 7.1 Surround",
+};
+
+/* Bidi return channel codec: doesn't have endpoints */
+const struct a2dp_codec a2dp_codec_opus_05_return = {
+	OPUS_05_COMMON_FULL_DEFS,
+	.id = 0,
+	.name = "opus_05_duplex_bidi",
+	.description = "Opus Duplex Bidi channel",
+};
+
+const struct a2dp_codec a2dp_codec_opus_05_duplex = {
+	OPUS_05_COMMON_FULL_DEFS,
+	.id = SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_DUPLEX,
+	.name = "opus_05_duplex",
+	.description = "Opus Duplex",
+	.duplex_codec = &a2dp_codec_opus_05_return,
+};
+
+const struct a2dp_codec a2dp_codec_opus_05_pro = {
+	OPUS_05_COMMON_DEFS,
+	.id = SPA_BLUETOOTH_AUDIO_CODEC_OPUS_05_PRO,
+	.name = "opus_05_pro",
+	.description = "Opus Pro Audio",
+	.init_props = codec_init_props,
+	.clear_props = codec_clear_props,
+	.duplex_codec = &a2dp_codec_opus_05_return,
+};
+
+A2DP_CODEC_EXPORT_DEF(
+	"opus",
+	&a2dp_codec_opus_05,
+	&a2dp_codec_opus_05_51,
+	&a2dp_codec_opus_05_71,
+	&a2dp_codec_opus_05_duplex,
+	&a2dp_codec_opus_05_pro
+);

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codec-sbc.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codec-sbc.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codecs.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codecs.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-codecs.h -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-codecs.h Changed

@@ -33,6 +33,7 @@
 #include <spa/support/plugin.h>
 #include <spa/pod/pod.h>
 #include <spa/pod/builder.h>
+#include <spa/support/log.h>
 
 #include "a2dp-codec-caps.h"
 
@@ -43,7 +44,7 @@
 
 #define SPA_TYPE_INTERFACE_Bluez5CodecA2DP	SPA_TYPE_INFO_INTERFACE_BASE "Bluez5:Codec:A2DP:Private"
 
-#define SPA_VERSION_BLUEZ5_CODEC_A2DP		1
+#define SPA_VERSION_BLUEZ5_CODEC_A2DP		5
 
 struct spa_bluez5_codec_a2dp {
 	struct spa_interface iface;
@@ -62,6 +63,7 @@
 extern const char *codec_plugin_factory_name;
 #endif
 
+#define A2DP_CODEC_FLAG_SINK		(1 << 0)
 
 #define A2DP_CODEC_DEFAULT_RATE		48000
 #define A2DP_CODEC_DEFAULT_CHANNELS	2
@@ -96,8 +98,8 @@
 	int (*select_config) (const struct a2dp_codec *codec, uint32_t flags,
 			const void *caps, size_t caps_size,
 			const struct a2dp_codec_audio_info *info,
-			const struct spa_dict *settings, uint8_t configA2DP_MAX_CAPS_SIZE);
-	int (*enum_config) (const struct a2dp_codec *codec,
+			const struct spa_dict *global_settings, uint8_t configA2DP_MAX_CAPS_SIZE);
+	int (*enum_config) (const struct a2dp_codec *codec, uint32_t flags,
 			const void *caps, size_t caps_size, uint32_t id, uint32_t idx,
 			struct spa_pod_builder *builder, struct spa_pod **param);
 	int (*validate_config) (const struct a2dp_codec *codec, uint32_t flags,
@@ -109,10 +111,11 @@
 	 * The caps handed in correspond to this codec_id, but are
 	 * otherwise not checked beforehand.
 	 */
-	int (*caps_preference_cmp) (const struct a2dp_codec *codec, const void *caps1, size_t caps1_size,
-			const void *caps2, size_t caps2_size, const struct a2dp_codec_audio_info *info);
+	int (*caps_preference_cmp) (const struct a2dp_codec *codec, uint32_t flags, const void *caps1, size_t caps1_size,
+			const void *caps2, size_t caps2_size, const struct a2dp_codec_audio_info *info,
+			const struct spa_dict *global_settings);
 
-	void *(*init_props) (const struct a2dp_codec *codec, const struct spa_dict *settings);
+	void *(*init_props) (const struct a2dp_codec *codec, uint32_t flags, const struct spa_dict *settings);
 	void (*clear_props) (void *);
 	int (*enum_props) (void *props, const struct spa_dict *settings, uint32_t id, uint32_t idx,
 			struct spa_pod_builder *builder, struct spa_pod **param);
@@ -144,6 +147,8 @@
 
 	int (*reduce_bitpool) (void *data);
 	int (*increase_bitpool) (void *data);
+
+	void (*set_log) (struct spa_log *global_log);
 };
 
 struct a2dp_codec_config {
@@ -156,6 +161,7 @@
 	uint32_t cap, int preferred_value);
 
 bool a2dp_codec_check_caps(const struct a2dp_codec *codec, unsigned int codec_id,
-	const void *caps, size_t caps_size, const struct a2dp_codec_audio_info *info);
+	const void *caps, size_t caps_size, const struct a2dp_codec_audio_info *info,
+	const struct spa_dict *global_settings);
 
 #endif

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-sink.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-sink.c Changed

@@ -137,6 +137,8 @@
 	unsigned int started:1;
 	unsigned int following:1;
 
+	unsigned int is_duplex:1;
+
 	struct spa_source source;
 	int timerfd;
 	struct spa_source flush_source;
@@ -908,7 +910,8 @@
 	for (i = 0; i < size; i++)
 		spa_log_debug(this->log, "  %d: %02x", i, confi);
 
-	this->codec_data = this->codec->init(this->codec, 0,
+	this->codec_data = this->codec->init(this->codec,
+			this->is_duplex ? A2DP_CODEC_FLAG_SINK : 0,
 			this->transport->configuration,
 			this->transport->configuration_len,
 			&port->current_format,
@@ -1195,6 +1198,7 @@
 			return -EIO;
 
 		if ((res = this->codec->enum_config(this->codec,
+					this->is_duplex ? A2DP_CODEC_FLAG_SINK : 0,
 					this->transport->configuration,
 					this->transport->configuration_len,
 					id, result.index, &b, &param)) != 1)
@@ -1457,8 +1461,8 @@
 	spa_return_val_if_fail(this != NULL, -EINVAL);
 
 	port = &this->port;
-	io = port->io;
-	spa_return_val_if_fail(io != NULL, -EIO);
+	if ((io = port->io) == NULL)
+		return -EIO;
 
 	if (this->position && this->position->clock.flags & SPA_IO_CLOCK_FLAG_FREEWHEEL) {
 		io->status = SPA_STATUS_NEED_DATA;
@@ -1697,6 +1701,9 @@
 
 	spa_list_init(&port->ready);
 
+	if (info && (str = spa_dict_lookup(info, "api.bluez5.a2dp-duplex")) != NULL)
+		this->is_duplex = spa_atob(str);
+
 	if (info && (str = spa_dict_lookup(info, SPA_KEY_API_BLUEZ5_TRANSPORT)))
 		sscanf(str, "pointer:%p", &this->transport);
 
@@ -1708,9 +1715,20 @@
 		spa_log_error(this->log, "a transport codec is needed");
 		return -EINVAL;
 	}
+
 	this->codec = this->transport->a2dp_codec;
+
+	if (this->is_duplex) {
+		if (!this->codec->duplex_codec) {
+			spa_log_error(this->log, "transport codec doesn't support duplex");
+			return -EINVAL;
+		}
+		this->codec = this->codec->duplex_codec;
+	}
+
 	if (this->codec->init_props != NULL)
 		this->codec_props = this->codec->init_props(this->codec,
+					this->is_duplex ? A2DP_CODEC_FLAG_SINK : 0,
 					this->transport->device->settings);
 
 	reset_props(this, &this->props);

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/a2dp-source.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/a2dp-source.c Changed

@@ -142,6 +142,7 @@
 
 	unsigned int is_input:1;
 	unsigned int is_duplex:1;
+	unsigned int use_duplex_source:1;
 
 	int fd;
 	struct spa_source source;
@@ -629,7 +630,8 @@
 
 	this->transport_acquired = true;
 
-	this->codec_data = this->codec->init(this->codec, 0,
+	this->codec_data = this->codec->init(this->codec,
+			this->is_duplex ? 0 : A2DP_CODEC_FLAG_SINK,
 			this->transport->configuration,
 			this->transport->configuration_len,
 			&port->current_format,
@@ -668,7 +670,7 @@
 
 	this->source.data = this;
 
-	if (!this->is_duplex) {
+	if (!this->use_duplex_source) {
 		this->source.fd = this->transport->fd;
 		this->source.func = a2dp_on_ready_read;
 		this->source.mask = SPA_IO_IN;
@@ -683,7 +685,8 @@
 		 * XXX: The reason for this should be found and fixed.
 		 * XXX: To work around this, for now we just do the stupid thing and poll
 		 * XXX: on a timer, chosen so that it's fast enough for the aptX-LL codec
-		 * XXX: we currently support (which sends mSBC data).
+		 * XXX: we currently support (which sends mSBC data), and also for Opus
+		 * XXX: forward stream.
 		 */
 		this->source.fd = this->duplex_timerfd;
 		this->source.func = a2dp_on_duplex_timeout;
@@ -691,7 +694,7 @@
 		this->source.rmask = 0;
 		spa_loop_add_source(this->data_loop, &this->source);
 
-		this->duplex_timeout = SPA_NSEC_PER_MSEC * 75/10;
+		this->duplex_timeout = SPA_NSEC_PER_MSEC * 25/10;
 		set_duplex_timeout(this, this->duplex_timeout);
 	}
 
@@ -718,13 +721,13 @@
 	if (this->started)
 		return 0;
 
+	spa_return_val_if_fail(this->transport != NULL, -EIO);
+
 	this->following = is_following(this);
 
 	spa_log_debug(this->log, "%p: start state:%d following:%d",
 			this, this->transport->state, this->following);
 
-	spa_return_val_if_fail(this->transport != NULL, -EIO);
-
 	if (this->transport->state >= SPA_BT_TRANSPORT_STATE_PENDING ||
 			this->is_duplex)
 		res = transport_start(this);
@@ -965,6 +968,7 @@
 			return -EIO;
 
 		if ((res = this->codec->enum_config(this->codec,
+					this->is_duplex ? 0 : A2DP_CODEC_FLAG_SINK,
 					this->transport->configuration,
 					this->transport->configuration_len,
 					id, result.index, &b, &param)) != 1)
@@ -1341,8 +1345,8 @@
 	spa_return_val_if_fail(this != NULL, -EINVAL);
 
 	port = &this->port;
-	io = port->io;
-	spa_return_val_if_fail(io != NULL, -EIO);
+	if ((io = port->io) == NULL)
+		return -EIO;
 
 	spa_log_trace(this->log, "%p status:%d", this, io->status);
 
@@ -1575,9 +1579,11 @@
 		this->codec = this->codec->duplex_codec;
 		this->is_input = true;
 	}
+	this->use_duplex_source = this->is_duplex || (this->codec->duplex_codec != NULL);
 
 	if (this->codec->init_props != NULL)
 		this->codec_props = this->codec->init_props(this->codec,
+					this->is_duplex ? 0 : A2DP_CODEC_FLAG_SINK,
 					this->transport->device->settings);
 
 	spa_bt_transport_add_listener(this->transport,
@@ -1586,7 +1592,7 @@
 	this->timerfd = spa_system_timerfd_create(this->data_system,
 			CLOCK_MONOTONIC, SPA_FD_CLOEXEC | SPA_FD_NONBLOCK);
 
-	if (this->is_duplex) {
+	if (this->use_duplex_source) {
 		this->duplex_timerfd = spa_system_timerfd_create(this->data_system,
 				CLOCK_MONOTONIC, SPA_FD_CLOEXEC | SPA_FD_NONBLOCK);
 	} else {

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/bluez-hardware.conf -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/bluez-hardware.conf Changed

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/bluez5-dbus.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/bluez5-dbus.c Changed

@@ -125,6 +125,10 @@
 
 	struct spa_bt_quirks *quirks;
 
+#define MAX_SETTINGS 128
+	struct spa_dict_item global_setting_itemsMAX_SETTINGS;
+	struct spa_dict global_settings;
+
 	/* A reference audio info for A2DP codec configuration. */
 	struct a2dp_codec_audio_info default_audio_info;
 };
@@ -437,18 +441,21 @@
 	return 0;
 }
 
-static const struct a2dp_codec *a2dp_endpoint_to_codec(struct spa_bt_monitor *monitor, const char *endpoint)
+static const struct a2dp_codec *a2dp_endpoint_to_codec(struct spa_bt_monitor *monitor, const char *endpoint, bool *sink)
 {
 	const char *ep_name;
 	const struct a2dp_codec * const * const a2dp_codecs = monitor->a2dp_codecs;
 	int i;
 
-	if (spa_strstartswith(endpoint, A2DP_SINK_ENDPOINT "/"))
+	if (spa_strstartswith(endpoint, A2DP_SINK_ENDPOINT "/")) {
 		ep_name = endpoint + strlen(A2DP_SINK_ENDPOINT "/");
-	else if (spa_strstartswith(endpoint, A2DP_SOURCE_ENDPOINT "/"))
+		*sink = true;
+	} else if (spa_strstartswith(endpoint, A2DP_SOURCE_ENDPOINT "/")) {
 		ep_name = endpoint + strlen(A2DP_SOURCE_ENDPOINT "/");
-	else
+		*sink = false;
+	} else {
 		return NULL;
+	}
 
 	for (i = 0; a2dp_codecsi; i++) {
 		const struct a2dp_codec *codec = a2dp_codecsi;
@@ -486,6 +493,7 @@
 	DBusError err;
 	int i, size, res;
 	const struct a2dp_codec *codec;
+	bool sink;
 
 	dbus_error_init(&err);
 
@@ -501,14 +509,15 @@
 	for (i = 0; i < size; i++)
 		spa_log_debug(monitor->log, "  %d: %02x", i, capi);
 
-	codec = a2dp_endpoint_to_codec(monitor, path);
+	codec = a2dp_endpoint_to_codec(monitor, path, &sink);
 	if (codec != NULL)
 		/* FIXME: We can't determine which device the SelectConfiguration()
 		 * call is associated with, therefore device settings are not passed.
 		 * This causes inconsistency with SelectConfiguration() triggered
 		 * by codec switching.
 		  */
-		res = codec->select_config(codec, 0, cap, size, &monitor->default_audio_info, NULL, config);
+		res = codec->select_config(codec, sink ? A2DP_CODEC_FLAG_SINK : 0, cap, size, &monitor->default_audio_info,
+				&monitor->global_settings, config);
 	else
 		res = -ENOTSUP;
 
@@ -1543,7 +1552,7 @@
 	return device->adapter && device->address;
 }
 
-bool spa_bt_device_supports_a2dp_codec(struct spa_bt_device *device, const struct a2dp_codec *codec)
+bool spa_bt_device_supports_a2dp_codec(struct spa_bt_device *device, const struct a2dp_codec *codec, bool sink)
 {
 	struct spa_bt_monitor *monitor = device->monitor;
 	struct spa_bt_remote_endpoint *ep;
@@ -1579,15 +1588,22 @@
 	}
 
 	spa_list_for_each(ep, &device->remote_endpoint_list, device_link) {
+		const enum spa_bt_profile profile = spa_bt_profile_from_uuid(ep->uuid);
+		const enum spa_bt_profile expected = sink ?
+			SPA_BT_PROFILE_A2DP_SINK : SPA_BT_PROFILE_A2DP_SOURCE;
+
+		if (profile != expected)
+			continue;
+
 		if (a2dp_codec_check_caps(codec, ep->codec, ep->capabilities, ep->capabilities_len,
-					  &ep->monitor->default_audio_info))
+						&ep->monitor->default_audio_info, &monitor->global_settings))
 			return true;
 	}
 
 	return false;
 }
 
-const struct a2dp_codec **spa_bt_device_get_supported_a2dp_codecs(struct spa_bt_device *device, size_t *count)
+const struct a2dp_codec **spa_bt_device_get_supported_a2dp_codecs(struct spa_bt_device *device, size_t *count, bool sink)
 {
 	struct spa_bt_monitor *monitor = device->monitor;
 	const struct a2dp_codec * const * const a2dp_codecs = monitor->a2dp_codecs;
@@ -1603,7 +1619,7 @@
 
 	j = 0;
 	for (i = 0; a2dp_codecsi != NULL; ++i) {
-		if (spa_bt_device_supports_a2dp_codec(device, a2dp_codecsi)) {
+		if (spa_bt_device_supports_a2dp_codec(device, a2dp_codecsi, sink)) {
 			supported_codecsj = a2dp_codecsi;
 			++j;
 		}
@@ -2511,7 +2527,7 @@
 	.set_volume = transport_set_volume,
 };
 
-static void append_basic_array_variant_dict_entry(DBusMessageIter *dict, int key_type_int, void* key, const char* variant_type_str, const char* array_type_str, int array_type_int, void* data, int data_size);
+static void append_basic_array_variant_dict_entry(DBusMessageIter *dict, const char* key, const char* variant_type_str, const char* array_type_str, int array_type_int, void* data, int data_size);
 
 static void a2dp_codec_switch_reply(DBusPendingCall *pending, void *userdata);
 
@@ -2569,10 +2585,10 @@
 	char *local_endpoint = NULL;
 	int res, config_size;
 	dbus_bool_t dbus_ret;
-	const char *str;
 	DBusMessage *m;
 	DBusMessageIter iter, d;
 	int i;
+	bool sink;
 
 	/* Try setting configuration for current codec on current endpoint in list */
 
@@ -2603,8 +2619,10 @@
 
 	if (sw->profile & SPA_BT_PROFILE_A2DP_SINK) {
 		local_endpoint_base = A2DP_SOURCE_ENDPOINT;
+		sink = false;
 	} else if (sw->profile & SPA_BT_PROFILE_A2DP_SOURCE) {
 		local_endpoint_base = A2DP_SINK_ENDPOINT;
+		sink = true;
 	} else {
 		spa_log_debug(sw->device->monitor->log, "a2dp codec switch %p: bad profile (%d), try next",
 		              sw, sw->profile);
@@ -2630,9 +2648,9 @@
 		}
 	}
 
-	res = codec->select_config(codec, 0, ep->capabilities, ep->capabilities_len,
+	res = codec->select_config(codec, sink ? A2DP_CODEC_FLAG_SINK : 0, ep->capabilities, ep->capabilities_len,
 				   &sw->device->monitor->default_audio_info,
-				   sw->device->settings, config);
+				   &sw->device->monitor->global_settings, config);
 	if (res < 0) {
 		spa_log_debug(sw->device->monitor->log, "a2dp codec switch %p: incompatible capabilities (%d), try next",
 		              sw, res);
@@ -2659,8 +2677,7 @@
 	dbus_message_iter_init_append(m, &iter);
 	dbus_message_iter_append_basic(&iter, DBUS_TYPE_OBJECT_PATH, &local_endpoint);
 	dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, "{sv}", &d);
-	str = "Capabilities";
-	append_basic_array_variant_dict_entry(&d, DBUS_TYPE_STRING, &str, "ay", "y", DBUS_TYPE_BYTE, config, config_size);
+	append_basic_array_variant_dict_entry(&d, "Capabilities", "ay", "y", DBUS_TYPE_BYTE, config, config_size);
 	dbus_message_iter_close_container(&iter, &d);
 
 	spa_assert(sw->pending == NULL);
@@ -2878,6 +2895,7 @@
 	const struct a2dp_codec *codec = *sw->codec_iter;
 	const char *path1 = *(char **)a, *path2 = *(char **)b;
 	struct spa_bt_remote_endpoint *ep1, *ep2;
+	uint32_t flags;
 
 	ep1 = device_remote_endpoint_find(sw->device, path1);
 	ep2 = device_remote_endpoint_find(sw->device, path2);
@@ -2886,6 +2904,10 @@
 		ep1 = NULL;
 	if (ep2 != NULL && (ep2->uuid == NULL || ep2->codec != codec->codec_id || ep2->capabilities == NULL))
 		ep2 = NULL;
+	if (ep1 && ep2 && !spa_streq(ep1->uuid, ep2->uuid)) {
+		ep1 = NULL;
+		ep2 = NULL;
+	}
 
 	if (ep1 == NULL && ep2 == NULL)
 		return 0;
@@ -2894,8 +2916,11 @@
 	else if (ep2 == NULL)
 		return -1;
 
-	return codec->caps_preference_cmp(codec, ep1->capabilities, ep1->capabilities_len,
-			ep2->capabilities, ep2->capabilities_len, &sw->device->monitor->default_audio_info);
+	flags = spa_streq(ep1->uuid, SPA_BT_UUID_A2DP_SOURCE) ? A2DP_CODEC_FLAG_SINK : 0;
+
+	return codec->caps_preference_cmp(codec, flags, ep1->capabilities, ep1->capabilities_len,
+			ep2->capabilities, ep2->capabilities_len, &sw->device->monitor->default_audio_info,
+			&sw->device->monitor->global_settings);
 }
 
 /* Ensure there's a transport for at least one of the listed codecs */
@@ -2913,7 +2938,7 @@
 	}
 
 	for (i = 0; codecsi != NULL; ++i) {
-		if (spa_bt_device_supports_a2dp_codec(device, codecsi)) {
+		if (spa_bt_device_supports_a2dp_codec(device, codecsi, true)) {
 			preferred_codec = codecsi;
 			break;
 		}
@@ -3031,6 +3056,7 @@
 	struct spa_bt_transport *transport;
 	const struct a2dp_codec *codec;
 	int profile;
+	bool sink;
 
 	if (!dbus_message_has_signature(m, "oa{sv}")) {
 		spa_log_warn(monitor->log, "invalid SetConfiguration() signature");
@@ -3039,7 +3065,7 @@
 	endpoint = dbus_message_get_path(m);
 
 	profile = a2dp_endpoint_to_profile(endpoint);
-	codec = a2dp_endpoint_to_codec(monitor, endpoint);
+	codec = a2dp_endpoint_to_codec(monitor, endpoint, &sink);
 	if (codec == NULL) {
 		spa_log_warn(monitor->log, "unknown SetConfiguration() codec");
 		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
@@ -3100,7 +3126,7 @@
 
 	if (codec->validate_config) {
 		struct spa_audio_info info;
-		if (codec->validate_config(codec, 0,
+		if (codec->validate_config(codec, sink ? A2DP_CODEC_FLAG_SINK : 0,
 					transport->configuration, transport->configuration_len,
 					&info) < 0) {
 			spa_log_error(monitor->log, "invalid transport configuration");
@@ -3256,10 +3282,10 @@
 	dbus_pending_call_unref(pending);
 }
 
-static void append_basic_variant_dict_entry(DBusMessageIter *dict, int key_type_int, void* key, int variant_type_int, const char* variant_type_str, void* variant) {
+static void append_basic_variant_dict_entry(DBusMessageIter *dict, const char* key, int variant_type_int, const char* variant_type_str, void* variant) {
 	DBusMessageIter dict_entry_it, variant_it;
 	dbus_message_iter_open_container(dict, DBUS_TYPE_DICT_ENTRY, NULL, &dict_entry_it);
-	dbus_message_iter_append_basic(&dict_entry_it, key_type_int, key);
+	dbus_message_iter_append_basic(&dict_entry_it, DBUS_TYPE_STRING, &key);
 
 	dbus_message_iter_open_container(&dict_entry_it, DBUS_TYPE_VARIANT, variant_type_str, &variant_it);
 	dbus_message_iter_append_basic(&variant_it, variant_type_int, variant);
@@ -3267,10 +3293,10 @@
 	dbus_message_iter_close_container(dict, &dict_entry_it);
 }
 
-static void append_basic_array_variant_dict_entry(DBusMessageIter *dict, int key_type_int, void* key, const char* variant_type_str, const char* array_type_str, int array_type_int, void* data, int data_size) {
+static void append_basic_array_variant_dict_entry(DBusMessageIter *dict, const char* key, const char* variant_type_str, const char* array_type_str, int array_type_int, void* data, int data_size) {
 	DBusMessageIter dict_entry_it, variant_it, array_it;
 	dbus_message_iter_open_container(dict, DBUS_TYPE_DICT_ENTRY, NULL, &dict_entry_it);
-	dbus_message_iter_append_basic(&dict_entry_it, key_type_int, key);
+	dbus_message_iter_append_basic(&dict_entry_it, DBUS_TYPE_STRING, &key);
 
 	dbus_message_iter_open_container(&dict_entry_it, DBUS_TYPE_VARIANT, variant_type_str, &variant_it);
 	dbus_message_iter_open_container(&variant_it, DBUS_TYPE_ARRAY, array_type_str, &array_it);
@@ -3283,19 +3309,22 @@
 static int bluez_register_endpoint(struct spa_bt_monitor *monitor,
                              const char *path, const char *endpoint,
 			     const char *uuid, const struct a2dp_codec *codec) {
-	char *str, *object_path = NULL;
+	char *object_path = NULL;
 	DBusMessage *m;
 	DBusMessageIter object_it, dict_it;
 	DBusPendingCall *call;
 	uint8_t capsA2DP_MAX_CAPS_SIZE;
 	int ret, caps_size;
 	uint16_t codec_id = codec->codec_id;
+	bool sink;
 
 	ret = a2dp_codec_to_endpoint(codec, endpoint, &object_path);
 	if (ret < 0)
 		goto error;
 
-	ret = caps_size = codec->fill_caps(codec, 0, caps);
+	sink = spa_streq(endpoint, A2DP_SINK_ENDPOINT);
+
+	ret = caps_size = codec->fill_caps(codec, sink ? A2DP_CODEC_FLAG_SINK : 0, caps);
 	if (ret < 0)
 		goto error;
 
@@ -3313,12 +3342,9 @@
 
 	dbus_message_iter_open_container(&object_it, DBUS_TYPE_ARRAY, "{sv}", &dict_it);
 
-	str = "UUID";
-	append_basic_variant_dict_entry(&dict_it, DBUS_TYPE_STRING, &str, DBUS_TYPE_STRING, "s", &uuid);
-	str = "Codec";
-	append_basic_variant_dict_entry(&dict_it, DBUS_TYPE_STRING, &str, DBUS_TYPE_BYTE, "y", &codec_id);
-	str = "Capabilities";
-	append_basic_array_variant_dict_entry(&dict_it, DBUS_TYPE_STRING, &str, "ay", "y", DBUS_TYPE_BYTE, caps, caps_size);
+	append_basic_variant_dict_entry(&dict_it,"UUID", DBUS_TYPE_STRING, "s", &uuid);
+	append_basic_variant_dict_entry(&dict_it, "Codec", DBUS_TYPE_BYTE, "y", &codec_id);
+	append_basic_array_variant_dict_entry(&dict_it, "Capabilities", "ay", "y", DBUS_TYPE_BYTE, caps, caps_size);
 
 	dbus_message_iter_close_container(&object_it, &dict_it);
 
@@ -3422,7 +3448,6 @@
 static void append_a2dp_object(DBusMessageIter *iter, const char *endpoint,
 		const char *uuid, uint8_t codec_id, uint8_t *caps, size_t caps_size)
 {
-	char* str;
 	const char *interface_name = BLUEZ_MEDIA_ENDPOINT_INTERFACE;
 	DBusMessageIter object, array, entry, dict;
 	dbus_bool_t delay_reporting;
@@ -3437,16 +3462,12 @@
 
 	dbus_message_iter_open_container(&entry, DBUS_TYPE_ARRAY, "{sv}", &dict);
 
-	str = "UUID";
-	append_basic_variant_dict_entry(&dict, DBUS_TYPE_STRING, &str, DBUS_TYPE_STRING, "s", &uuid);
-	str = "Codec";
-	append_basic_variant_dict_entry(&dict, DBUS_TYPE_STRING, &str, DBUS_TYPE_BYTE, "y", &codec_id);
-	str = "Capabilities";
-	append_basic_array_variant_dict_entry(&dict, DBUS_TYPE_STRING, &str, "ay", "y", DBUS_TYPE_BYTE, caps, caps_size);
+	append_basic_variant_dict_entry(&dict, "UUID", DBUS_TYPE_STRING, "s", &uuid);
+	append_basic_variant_dict_entry(&dict, "Codec", DBUS_TYPE_BYTE, "y", &codec_id);
+	append_basic_array_variant_dict_entry(&dict, "Capabilities", "ay", "y", DBUS_TYPE_BYTE, caps, caps_size);
 	if (spa_bt_profile_from_uuid(uuid) & SPA_BT_PROFILE_A2DP_SOURCE) {
-		str = "DelayReporting";
 		delay_reporting = TRUE;
-		append_basic_variant_dict_entry(&dict, DBUS_TYPE_STRING, &str, DBUS_TYPE_BOOLEAN, "b", &delay_reporting);
+		append_basic_variant_dict_entry(&dict, "DelayReporting", DBUS_TYPE_BOOLEAN, "b", &delay_reporting);
 	}
 
 	dbus_message_iter_close_container(&entry, &dict);
@@ -3501,11 +3522,11 @@
 			if (!is_a2dp_codec_enabled(monitor, codec))
 				continue;
 
-			caps_size = codec->fill_caps(codec, 0, caps);
-			if (caps_size < 0)
-				continue;
-
 			if (codec->decode != NULL) {
+				caps_size = codec->fill_caps(codec, A2DP_CODEC_FLAG_SINK, caps);
+				if (caps_size < 0)
+					continue;
+
 				ret = a2dp_codec_to_endpoint(codec, A2DP_SINK_ENDPOINT, &endpoint);
 				if (ret == 0) {
 					spa_log_info(monitor->log, "register A2DP sink codec %s: %s", a2dp_codecsi->name, endpoint);
@@ -3516,6 +3537,10 @@
 			}
 
 			if (codec->encode != NULL) {
+				caps_size = codec->fill_caps(codec, 0, caps);
+				if (caps_size < 0)
+					continue;
+
 				ret = a2dp_codec_to_endpoint(codec, A2DP_SOURCE_ENDPOINT, &endpoint);
 				if (ret == 0) {
 					spa_log_info(monitor->log, "register A2DP source codec %s: %s", a2dp_codecsi->name, endpoint);
@@ -4286,6 +4311,7 @@
 	struct spa_bt_device *d;
 	struct spa_bt_remote_endpoint *ep;
 	struct spa_bt_transport *t;
+	const struct spa_dict_item *it;
 	size_t i;
 
 	monitor = (struct spa_bt_monitor *) handle;
@@ -4317,6 +4343,11 @@
 		monitor->backendsi = NULL;
 	}
 
+	spa_dict_for_each(it, &monitor->global_settings) {
+		free((void *)it->key);
+		free((void *)it->value);
+	}
+
 	free((void*)monitor->enabled_codecs.items);
 	spa_zero(monitor->enabled_codecs);
 
@@ -4453,6 +4484,26 @@
 	return 0;
 }
 
+static void get_global_settings(struct spa_bt_monitor *this, const struct spa_dict *dict)
+{
+	uint32_t n_items = 0;
+	uint32_t i;
+
+	if (dict == NULL) {
+		this->global_settings = SPA_DICT_INIT(this->global_setting_items, 0);
+		return;
+	}
+
+	for (i = 0; i < dict->n_items && n_items < SPA_N_ELEMENTS(this->global_setting_items); i++) {
+		const struct spa_dict_item *it = &dict->itemsi;
+		if (spa_strstartswith(it->key, "bluez5.") && it->value != NULL)
+			this->global_setting_itemsn_items++ =
+				SPA_DICT_ITEM_INIT(strdup(it->key), strdup(it->value));
+	}
+
+	this->global_settings = SPA_DICT_INIT(this->global_setting_items, n_items);
+}
+
 static int
 impl_init(const struct spa_handle_factory *factory,
 	  struct spa_handle *handle,
@@ -4546,6 +4597,8 @@
 
 	this->backend_selection = BACKEND_NATIVE;
 
+	get_global_settings(this, info);
+
 	if (info) {
 		const char *str;
 		uint32_t tmp;

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/bluez5-device.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/bluez5-device.c Changed

@@ -301,6 +301,8 @@
 
 static float get_soft_volume_boost(struct node *node)
 {
+	const struct a2dp_codec *codec = node->transport ? node->transport->a2dp_codec : NULL;
+
 	/*
 	 * For A2DP duplex, the duplex microphone channel sometimes does not appear
 	 * to have hardware gain, and input volume is very low.
@@ -310,7 +312,8 @@
 	 * If this causes clipping, the user can just reduce the mic volume to
 	 * bring SW gain below 1.
 	 */
-	if (node->a2dp_duplex && node->transport &&
+	if (node->a2dp_duplex && node->transport && codec && codec->info &&
+			spa_atob(spa_dict_lookup(codec->info, "duplex.boost")) &&
 			node->id == DEVICE_ID_SOURCE &&
 			!node->transport->volumesSPA_BT_VOLUME_ID_RX.active)
 		return 10.0f;	/* 20 dB boost */
@@ -912,7 +915,7 @@
 	if (this->bt_dev->connected_profiles & SPA_BT_PROFILE_A2DP_SINK) {
 		free(this->supported_codecs);
 		this->supported_codecs = spa_bt_device_get_supported_a2dp_codecs(
-			this->bt_dev, &this->supported_codec_count);
+			this->bt_dev, &this->supported_codec_count, true);
 	}
 
 	switch (this->profile) {
@@ -1127,7 +1130,7 @@
 	if (this->supported_codecs)
 		free(this->supported_codecs);
 	this->supported_codecs = spa_bt_device_get_supported_a2dp_codecs(
-					this->bt_dev, &this->supported_codec_count);
+		this->bt_dev, &this->supported_codec_count, true);
 
 	/* Prefer A2DP, then HFP, then null, but select AG if the device
 	   appears not to have A2DP_SINK or any HEAD_UNIT profile */

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/codec-loader.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/codec-loader.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/decode-buffer.h -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/decode-buffer.h Changed

@@ -389,7 +389,8 @@
 static void spa_bt_decode_buffer_process(struct spa_bt_decode_buffer *this, uint32_t samples, uint32_t duration)
 {
 	const uint32_t data_size = samples * this->frame_size;
-	const int32_t max_level = SPA_MAX(8 * this->packet_size.max, (int32_t)duration);
+	const int32_t packet_size = SPA_CLAMP(this->packet_size.max, 0, INT32_MAX/8);
+	const int32_t max_level = SPA_MAX(8 * packet_size, (int32_t)duration);
 	uint32_t avail;
 
 	if (SPA_UNLIKELY(duration != this->prev_duration)) {
@@ -405,8 +406,8 @@
 		spa_log_trace(this->log, "%p buffering size:%d", this, (int)size);
 
 		if (this->received &&
-				this->packet_size.max > 0 &&
-				size >= SPA_MAX(3*this->packet_size.max, (int32_t)duration))
+				packet_size > 0 &&
+				size >= SPA_MAX(3*packet_size, (int32_t)duration))
 			this->buffering = false;
 		else
 			return;
@@ -428,7 +429,7 @@
 		spa_bt_ptp_update(&this->spike, this->ctl.avg - level, this->prev_consumed);
 
 		/* Update target level */
-		target = BUFFERING_TARGET(this->spike.max, this->packet_size.max);
+		target = BUFFERING_TARGET(this->spike.max, packet_size);
 
 		if (level > SPA_MAX(4 * target, 2*(int32_t)duration) &&
 				avail > data_size) {

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/defs.h -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/defs.h Changed

@@ -134,13 +134,13 @@
 
 #define BLUEZ_ERROR_NOT_SUPPORTED "org.bluez.Error.NotSupported"
 
-#define SPA_BT_UUID_A2DP_SOURCE "0000110A-0000-1000-8000-00805F9B34FB"
-#define SPA_BT_UUID_A2DP_SINK   "0000110B-0000-1000-8000-00805F9B34FB"
-#define SPA_BT_UUID_HSP_HS      "00001108-0000-1000-8000-00805F9B34FB"
-#define SPA_BT_UUID_HSP_HS_ALT  "00001131-0000-1000-8000-00805F9B34FB"
-#define SPA_BT_UUID_HSP_AG      "00001112-0000-1000-8000-00805F9B34FB"
-#define SPA_BT_UUID_HFP_HF      "0000111E-0000-1000-8000-00805F9B34FB"
-#define SPA_BT_UUID_HFP_AG      "0000111F-0000-1000-8000-00805F9B34FB"
+#define SPA_BT_UUID_A2DP_SOURCE "0000110a-0000-1000-8000-00805f9b34fb"
+#define SPA_BT_UUID_A2DP_SINK   "0000110b-0000-1000-8000-00805f9b34fb"
+#define SPA_BT_UUID_HSP_HS      "00001108-0000-1000-8000-00805f9b34fb"
+#define SPA_BT_UUID_HSP_HS_ALT  "00001131-0000-1000-8000-00805f9b34fb"
+#define SPA_BT_UUID_HSP_AG      "00001112-0000-1000-8000-00805f9b34fb"
+#define SPA_BT_UUID_HFP_HF      "0000111e-0000-1000-8000-00805f9b34fb"
+#define SPA_BT_UUID_HFP_AG      "0000111f-0000-1000-8000-00805f9b34fb"
 
 #define PROFILE_HSP_AG	"/Profile/HSPAG"
 #define PROFILE_HSP_HS	"/Profile/HSPHS"
@@ -490,8 +490,8 @@
 int spa_bt_device_connect_profile(struct spa_bt_device *device, enum spa_bt_profile profile);
 int spa_bt_device_check_profiles(struct spa_bt_device *device, bool force);
 int spa_bt_device_ensure_a2dp_codec(struct spa_bt_device *device, const struct a2dp_codec * const *codecs);
-bool spa_bt_device_supports_a2dp_codec(struct spa_bt_device *device, const struct a2dp_codec *codec);
-const struct a2dp_codec **spa_bt_device_get_supported_a2dp_codecs(struct spa_bt_device *device, size_t *count);
+bool spa_bt_device_supports_a2dp_codec(struct spa_bt_device *device, const struct a2dp_codec *codec, bool sink);
+const struct a2dp_codec **spa_bt_device_get_supported_a2dp_codecs(struct spa_bt_device *device, size_t *count, bool sink);
 int spa_bt_device_ensure_hfp_codec(struct spa_bt_device *device, unsigned int codec);
 int spa_bt_device_supports_hfp_codec(struct spa_bt_device *device, unsigned int codec);
 int spa_bt_device_release_transports(struct spa_bt_device *device);

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/meson.build -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/meson.build Changed

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/sco-sink.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/sco-sink.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/bluez5/sco-source.c -> pipewire-0.3.57.tar.gz/spa/plugins/bluez5/sco-source.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/control/mixer.c -> pipewire-0.3.57.tar.gz/spa/plugins/control/mixer.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/libcamera/libcamera-device.cpp -> pipewire-0.3.57.tar.gz/spa/plugins/libcamera/libcamera-device.cpp Changed

@@ -78,35 +78,32 @@
 	std::shared_ptr<Camera> camera;
 };
 
-std::string cameraModel(const Camera *camera)
+static std::string cameraModel(const Camera *camera)
 {
 	const ControlList &props = camera->properties();
-	std::string name;
-	if (props.contains(properties::Model))
-		name = props.get(properties::Model);
-	else
-		name = camera->id();
-        return name;
+
+	if (auto model = props.get(properties::Model))
+		return std::move(model.value());
+
+	return camera->id();
 }
 
-std::string cameraLoc(const Camera *camera)
+static const char *cameraLoc(const Camera *camera)
 {
 	const ControlList &props = camera->properties();
-	std::string location;
-	if (props.contains(properties::Location)) {
-		switch (props.get(properties::Location)) {
+
+	if (auto location = props.get(properties::Location)) {
+		switch (location.value()) {
 		case properties::CameraLocationFront:
-			location = "front";
-			break;
+			return "front";
 		case properties::CameraLocationBack:
-			location = "back";
-			break;
+			return "back";
 		case properties::CameraLocationExternal:
-			location = "external";
-			break;
+			return "external";
 		}
 	}
-	return location;
+
+	return nullptr;
 }
 
 static int emit_info(struct impl *impl, bool full)
@@ -116,7 +113,7 @@
 	uint32_t n_items = 0;
 	struct spa_device_info info;
 	struct spa_param_info params2;
-	char path256, location10, model256, name256;
+	char path256, model256, name256;
 
 	info = SPA_DEVICE_INFO_INIT();
 
@@ -127,9 +124,11 @@
 	ADD_ITEM(SPA_KEY_OBJECT_PATH, path);
 	ADD_ITEM(SPA_KEY_DEVICE_API, "libcamera");
 	ADD_ITEM(SPA_KEY_MEDIA_CLASS, "Video/Device");
-	ADD_ITEM(SPA_KEY_API_LIBCAMERA_PATH, (char *)impl->props.device);
-	snprintf(location, sizeof(location), "%s", cameraLoc(impl->camera.get()).c_str());
-	ADD_ITEM(SPA_KEY_API_LIBCAMERA_LOCATION, location);
+	ADD_ITEM(SPA_KEY_API_LIBCAMERA_PATH, impl->props.device);
+
+	if (auto location = cameraLoc(impl->camera.get()))
+		ADD_ITEM(SPA_KEY_API_LIBCAMERA_LOCATION, location);
+
 	snprintf(model, sizeof(model), "%s", cameraModel(impl->camera.get()).c_str());
 	ADD_ITEM(SPA_KEY_DEVICE_PRODUCT_NAME, model);
 	ADD_ITEM(SPA_KEY_DEVICE_DESCRIPTION, model);

pipewire-0.3.56.tar.gz/spa/plugins/libcamera/libcamera-source.cpp -> pipewire-0.3.57.tar.gz/spa/plugins/libcamera/libcamera-source.cpp Changed

pipewire-0.3.56.tar.gz/spa/plugins/meson.build -> pipewire-0.3.57.tar.gz/spa/plugins/meson.build Changed

pipewire-0.3.56.tar.gz/spa/plugins/support/loop.c -> pipewire-0.3.57.tar.gz/spa/plugins/support/loop.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/support/null-audio-sink.c -> pipewire-0.3.57.tar.gz/spa/plugins/support/null-audio-sink.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/test/fakesink.c -> pipewire-0.3.57.tar.gz/spa/plugins/test/fakesink.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/test/fakesrc.c -> pipewire-0.3.57.tar.gz/spa/plugins/test/fakesrc.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/v4l2/v4l2-source.c -> pipewire-0.3.57.tar.gz/spa/plugins/v4l2/v4l2-source.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/videotestsrc/videotestsrc.c -> pipewire-0.3.57.tar.gz/spa/plugins/videotestsrc/videotestsrc.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/volume/volume.c -> pipewire-0.3.57.tar.gz/spa/plugins/volume/volume.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/vulkan/vulkan-compute-filter.c -> pipewire-0.3.57.tar.gz/spa/plugins/vulkan/vulkan-compute-filter.c Changed

pipewire-0.3.56.tar.gz/spa/plugins/vulkan/vulkan-compute-source.c -> pipewire-0.3.57.tar.gz/spa/plugins/vulkan/vulkan-compute-source.c Changed

pipewire-0.3.57.tar.gz/src/daemon/systemd/user/filter-chain.service.in Added

pipewire-0.3.56.tar.gz/src/daemon/systemd/user/meson.build -> pipewire-0.3.57.tar.gz/src/daemon/systemd/user/meson.build Changed

pipewire-0.3.56.tar.gz/src/gst/gstpipewiresrc.c -> pipewire-0.3.57.tar.gz/src/gst/gstpipewiresrc.c Changed

@@ -568,19 +568,23 @@
       meta->height = crop->region.size.height;
     }
   }
-  gst_buffer_add_parent_buffer_meta (buf, data->buf);
-  gst_buffer_unref (data->buf);
   for (i = 0; i < b->buffer->n_datas; i++) {
     struct spa_data *d = &b->buffer->datasi;
     GstMemory *pmem = gst_buffer_peek_memory (data->buf, i);
     if (pmem) {
-      GstMemory *mem = gst_memory_share (pmem, d->chunk->offset, d->chunk->size);
+      GstMemory *mem;
+      if (!pwsrc->always_copy)
+        mem = gst_memory_share (pmem, d->chunk->offset, d->chunk->size);
+      else
+        mem = gst_memory_copy (pmem, d->chunk->offset, d->chunk->size);
       gst_buffer_insert_memory (buf, i, mem);
-      spa_assert_se(mem->size <= mem->maxsize);
     }
     if (d->chunk->flags & SPA_CHUNK_FLAG_CORRUPTED)
       GST_BUFFER_FLAG_SET (buf, GST_BUFFER_FLAG_CORRUPTED);
   }
+  if (!pwsrc->always_copy)
+    gst_buffer_add_parent_buffer_meta (buf, data->buf);
+  gst_buffer_unref (data->buf);
   return buf;
 }
 
@@ -1091,12 +1095,7 @@
   }
   pw_thread_loop_unlock (pwsrc->core->loop);
 
-  if (pwsrc->always_copy) {
-    *buffer = gst_buffer_copy_deep (buf);
-    gst_buffer_unref (buf);
-  }
-  else
-    *buffer = buf;
+  *buffer = buf;
 
   if (pwsrc->is_live)
     base_time = GST_ELEMENT_CAST (psrc)->base_time;

pipewire-0.3.57.tar.gz/src/modules/flatpak-utils.h Added

@@ -0,0 +1,156 @@
+/* PipeWire
+ *
+ * Copyright © 2018 Wim Taymans
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef FLATPAK_UTILS_H
+#define FLATPAK_UTILS_H
+
+#include <stdio.h>
+#include <string.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#ifdef HAVE_SYS_VFS_H
+#include <sys/vfs.h>
+#endif
+
+#include "config.h"
+
+#ifdef HAVE_GLIB2
+#include <glib.h>
+#endif
+
+#include <spa/utils/result.h>
+#include <pipewire/log.h>
+
+static int pw_check_flatpak_parse_metadata(const char *buf, size_t size, char **app_id, char **devices)
+{
+#ifdef HAVE_GLIB2
+	/*
+	 * See flatpak-metadata(5)
+	 *
+	 * The .flatpak-info file is in GLib key_file .ini format.
+	 */
+	g_autoptr(GKeyFile) metadata = NULL;
+	char *s;
+
+	metadata = g_key_file_new();
+	if (!g_key_file_load_from_data(metadata, buf, size, G_KEY_FILE_NONE, NULL))
+		return -EINVAL;
+
+	if (app_id) {
+		s = g_key_file_get_value(metadata, "Application", "name", NULL);
+		*app_id = s ? strdup(s) : NULL;
+		g_free(s);
+	}
+
+	if (devices) {
+		s = g_key_file_get_value(metadata, "Context", "devices", NULL);
+		*devices = s ? strdup(s) : NULL;
+		g_free(s);
+	}
+
+	return 0;
+#else
+	return -ENOTSUP;
+#endif
+}
+
+static int pw_check_flatpak(pid_t pid, char **app_id, char **devices)
+{
+#if defined(__linux__)
+	char root_path2048;
+	int root_fd, info_fd, res;
+	struct stat stat_buf;
+
+	if (app_id)
+		*app_id = NULL;
+	if (devices)
+		*devices = NULL;
+
+	snprintf(root_path, sizeof(root_path), "/proc/%d/root", (int)pid);
+	root_fd = openat (AT_FDCWD, root_path, O_RDONLY | O_NONBLOCK | O_DIRECTORY | O_CLOEXEC | O_NOCTTY);
+	if (root_fd == -1) {
+		res = -errno;
+		if (res == -EACCES) {
+			struct statfs buf;
+			/* Access to the root dir isn't allowed. This can happen if the root is on a fuse
+			 * filesystem, such as in a toolbox container. We will never have a fuse rootfs
+			 * in the flatpak case, so in that case its safe to ignore this and
+			 * continue to detect other types of apps. */
+			if (statfs(root_path, &buf) == 0 &&
+			    buf.f_type == 0x65735546) /* FUSE_SUPER_MAGIC */
+				return 0;
+		}
+		/* Not able to open the root dir shouldn't happen. Probably the app died and
+		 * we're failing due to /proc/$pid not existing. In that case fail instead
+		 * of treating this as privileged. */
+		pw_log_info("failed to open \"%s\": %s", root_path, spa_strerror(res));
+		return res;
+	}
+	info_fd = openat (root_fd, ".flatpak-info", O_RDONLY | O_CLOEXEC | O_NOCTTY);
+	close (root_fd);
+	if (info_fd == -1) {
+		if (errno == ENOENT) {
+			pw_log_debug("no .flatpak-info, client on the host");
+			/* No file => on the host */
+			return 0;
+		}
+		res = -errno;
+		pw_log_error("error opening .flatpak-info: %m");
+		return res;
+        }
+	if (fstat (info_fd, &stat_buf) != 0 || !S_ISREG (stat_buf.st_mode)) {
+		/* Some weird fd => failure, assume sandboxed */
+		pw_log_error("error fstat .flatpak-info: %m");
+	} else if (app_id || devices) {
+		/* Parse the application ID if needed */
+		const size_t size = stat_buf.st_size;
+
+		if (size > 0) {
+			void *buf = mmap(NULL, size, PROT_READ, MAP_PRIVATE, info_fd, 0);
+			if (buf != MAP_FAILED) {
+				res = pw_check_flatpak_parse_metadata(buf, size, app_id, devices);
+				munmap(buf, size);
+			} else {
+				res = -errno;
+			}
+		} else {
+			res = -EINVAL;
+		}
+
+		if (res == -EINVAL)
+			pw_log_error("PID %d .flatpak-info file is malformed",
+					(int)pid);
+		else if (res < 0)
+			pw_log_error("PID %d .flatpak-info parsing failed: %s",
+					(int)pid, spa_strerror(res));
+	}
+	close(info_fd);
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+#endif /* FLATPAK_UTILS_H */

pipewire-0.3.56.tar.gz/src/modules/meson.build -> pipewire-0.3.57.tar.gz/src/modules/meson.build Changed

@@ -33,12 +33,17 @@
   'module-x11-bell.c',
 
 
+pipewire_module_access_deps = spa_dep, mathlib, dl_lib, pipewire_dep
+if flatpak_support
+  pipewire_module_access_deps += glib2_dep
+endif
+
 pipewire_module_access = shared_library('pipewire-module-access',  'module-access.c' ,
   include_directories : configinc,
   install : true,
   install_dir : modules_install_dir,
   install_rpath: modules_install_dir,
-  dependencies : spa_dep, mathlib, dl_lib, pipewire_dep,
+  dependencies : pipewire_module_access_deps
 )
 
 pipewire_module_loopback = shared_library('pipewire-module-loopback',
@@ -277,6 +282,10 @@
   cdata.set('HAVE_AVAHI', true)
 endif
 
+if flatpak_support
+  pipewire_module_protocol_pulse_deps += glib2_dep
+endif
+
 pipewire_module_protocol_pulse = shared_library('pipewire-module-protocol-pulse',
   pipewire_module_protocol_pulse_sources,
   include_directories : configinc,
@@ -470,7 +479,7 @@
 endif
 summary({'raop-sink (requires OpenSSL)': build_module_raop}, bool_yn: true, section: 'Optional Modules')
 
-roc_lib = cc.find_library('roc', required: get_option('roc'))
+roc_lib = cc.find_library('roc', has_headers: 'roc/config.h' , required: get_option('roc'))
 summary({'ROC': roc_lib.found()}, bool_yn: true, section: 'Streaming between daemons')
 
 build_module_roc = roc_lib.found()
@@ -518,7 +527,7 @@
   dependencies : mathlib, dl_lib, rt_lib, pipewire_dep,
 )
 
-build_module_avb = get_option('avb').allowed()
+build_module_avb = get_option('avb').require(host_machine.system() == 'linux', error_message: 'AVB support is only available on Linux').allowed()
 if build_module_avb
 pipewire_module_avb = shared_library('pipewire-module-avb',
    'module-avb.c',

pipewire-0.3.56.tar.gz/src/modules/module-access.c -> pipewire-0.3.57.tar.gz/src/modules/module-access.c Changed

@@ -46,6 +46,8 @@
 #include <pipewire/impl.h>
 #include <pipewire/private.h>
 
+#include "flatpak-utils.h"
+
 /** \page page_module_access PipeWire Module: Access
  *
  *
@@ -75,6 +77,9 @@
  *       on an external actor to update that property once permission is
  *       granted or rejected.
  *
+ * For connections from applications running inside Flatpak not mediated
+ * by a portal, the `access` module itself sets the `pipewire.access.portal.app_id`
+ * property to the Flatpak application ID.
  *
  * ## Module Options
  *
@@ -184,54 +189,6 @@
 	return res;
 }
 
-#if defined(__linux__)
-static int check_flatpak(struct pw_impl_client *client, int pid)
-{
-	char root_path2048;
-	int root_fd, info_fd, res;
-	struct stat stat_buf;
-
-	sprintf(root_path, "/proc/%u/root", pid);
-	root_fd = openat (AT_FDCWD, root_path, O_RDONLY | O_NONBLOCK | O_DIRECTORY | O_CLOEXEC | O_NOCTTY);
-	if (root_fd == -1) {
-		res = -errno;
-		if (res == -EACCES) {
-			struct statfs buf;
-			/* Access to the root dir isn't allowed. This can happen if the root is on a fuse
-			 * filesystem, such as in a toolbox container. We will never have a fuse rootfs
-			 * in the flatpak case, so in that case its safe to ignore this and
-			 * continue to detect other types of apps. */
-			if (statfs(root_path, &buf) == 0 &&
-			    buf.f_type == 0x65735546) /* FUSE_SUPER_MAGIC */
-				return 0;
-		}
-		/* Not able to open the root dir shouldn't happen. Probably the app died and
-		 * we're failing due to /proc/$pid not existing. In that case fail instead
-		 * of treating this as privileged. */
-		pw_log_info("failed to open \"%s\": %s", root_path, spa_strerror(res));
-		return res;
-	}
-	info_fd = openat (root_fd, ".flatpak-info", O_RDONLY | O_CLOEXEC | O_NOCTTY);
-	close (root_fd);
-	if (info_fd == -1) {
-		if (errno == ENOENT) {
-			pw_log_debug("no .flatpak-info, client on the host");
-			/* No file => on the host */
-			return 0;
-		}
-		res = -errno;
-		pw_log_error("error opening .flatpak-info: %m");
-		return res;
-        }
-	if (fstat (info_fd, &stat_buf) != 0 || !S_ISREG (stat_buf.st_mode)) {
-		/* Some weird fd => failure, assume sandboxed */
-		pw_log_error("error fstat .flatpak-info: %m");
-	}
-	close(info_fd);
-	return 1;
-}
-#endif
-
 static void
 context_check_access(void *data, struct pw_impl_client *client)
 {
@@ -240,6 +197,8 @@
 	struct spa_dict_item items2;
 	const struct pw_properties *props;
 	const char *str, *access;
+	char *flatpak_app_id = NULL;
+	int nitems = 0;
 	int pid, res;
 
 	pid = -EINVAL;
@@ -298,8 +257,7 @@
 	    (access = pw_properties_get(impl->properties, "access.force")) != NULL)
 		goto wait_permissions;
 
-#if defined(__linux__)
-	res = check_flatpak(client, pid);
+	res = pw_check_flatpak(pid, &flatpak_app_id, NULL);
 	if (res != 0) {
 		if (res < 0) {
 			if (res == -EACCES) {
@@ -313,9 +271,11 @@
 			pw_log_debug(" %p: flatpak client %p added", impl, client);
 		}
 		access = "flatpak";
+		itemsnitems++ = SPA_DICT_ITEM_INIT("pipewire.access.portal.app_id",
+				flatpak_app_id);
 		goto wait_permissions;
 	}
-#endif
+
 	if ((access = pw_properties_get(props, PW_KEY_CLIENT_ACCESS)) == NULL)
 		access = "unrestricted";
 
@@ -326,24 +286,28 @@
 
 granted:
 	pw_log_info("%p: client %p '%s' access granted", impl, client, access);
-	items0 = SPA_DICT_ITEM_INIT(PW_KEY_ACCESS, access);
-	pw_impl_client_update_properties(client, &SPA_DICT_INIT(items, 1));
+	itemsnitems++ = SPA_DICT_ITEM_INIT(PW_KEY_ACCESS, access);
+	pw_impl_client_update_properties(client, &SPA_DICT_INIT(items, nitems));
 
 	permissions0 = PW_PERMISSION_INIT(PW_ID_ANY, PW_PERM_ALL);
 	pw_impl_client_update_permissions(client, 1, permissions);
-	return;
+	goto done;
 
 wait_permissions:
 	pw_log_info("%p: client %p wait for '%s' permissions",
 			impl, client, access);
-	items0 = SPA_DICT_ITEM_INIT(PW_KEY_ACCESS, access);
-	pw_impl_client_update_properties(client, &SPA_DICT_INIT(items, 1));
-	return;
+	itemsnitems++ = SPA_DICT_ITEM_INIT(PW_KEY_ACCESS, access);
+	pw_impl_client_update_properties(client, &SPA_DICT_INIT(items, nitems));
+	goto done;
 
 rejected:
 	pw_resource_error(pw_impl_client_get_core_resource(client), res, access);
-	items0 = SPA_DICT_ITEM_INIT(PW_KEY_ACCESS, access);
-	pw_impl_client_update_properties(client, &SPA_DICT_INIT(items, 1));
+	itemsnitems++ = SPA_DICT_ITEM_INIT(PW_KEY_ACCESS, access);
+	pw_impl_client_update_properties(client, &SPA_DICT_INIT(items, nitems));
+	goto done;
+
+done:
+	free(flatpak_app_id);
 	return;
 }

pipewire-0.3.56.tar.gz/src/modules/module-avb/aaf.h -> pipewire-0.3.57.tar.gz/src/modules/module-avb/aaf.h Changed

pipewire-0.3.56.tar.gz/src/modules/module-avb/iec61883.h -> pipewire-0.3.57.tar.gz/src/modules/module-avb/iec61883.h Changed

pipewire-0.3.56.tar.gz/src/modules/module-avb/maap.c -> pipewire-0.3.57.tar.gz/src/modules/module-avb/maap.c Changed

pipewire-0.3.56.tar.gz/src/modules/module-client-node/remote-node.c -> pipewire-0.3.57.tar.gz/src/modules/module-client-node/remote-node.c Changed

pipewire-0.3.56.tar.gz/src/modules/module-echo-cancel.c -> pipewire-0.3.57.tar.gz/src/modules/module-echo-cancel.c Changed

pipewire-0.3.56.tar.gz/src/modules/module-filter-chain/convolver.c -> pipewire-0.3.57.tar.gz/src/modules/module-filter-chain/convolver.c Changed

pipewire-0.3.56.tar.gz/src/modules/module-filter-chain/lv2_plugin.c -> pipewire-0.3.57.tar.gz/src/modules/module-filter-chain/lv2_plugin.c Changed

pipewire-0.3.56.tar.gz/src/modules/module-protocol-native.c -> pipewire-0.3.57.tar.gz/src/modules/module-protocol-native.c Changed

@@ -103,6 +103,11 @@
  * - XDG_RUNTIME_DIR
  * - USERPROFILE
  *
+ * The socket address will be written into the notification file descriptor
+ * if the following environment variable is set:
+ *
+ * - PIPEWIRE_NOTIFICATION_FD
+ *
  * When a client connect, the connection will be made to:
  *
  * - PIPEWIRE_REMOTE : the environment with the remote name
@@ -605,12 +610,15 @@
 	if (client == NULL)
 		goto exit;
 
-
 	this = pw_impl_client_get_user_data(client);
 	spa_list_append(&s->this.client_list, &this->protocol_link);
 
 	this->server = s;
 	this->client = client;
+	pw_map_init(&this->compat_v2.types, 0, 32);
+
+	pw_impl_client_add_listener(client, &this->client_listener, &client_events, this);
+
 	this->source = pw_loop_add_io(pw_context_get_main_loop(context),
 				      fd, SPA_IO_ERR | SPA_IO_HUP, true,
 				      connection_data, this);
@@ -625,15 +633,11 @@
 		goto cleanup_client;
 	}
 
-	pw_map_init(&this->compat_v2.types, 0, 32);
-
 	pw_protocol_native_connection_add_listener(this->connection,
 						   &this->conn_listener,
 						   &server_conn_events,
 						   this);
 
-	pw_impl_client_add_listener(client, &this->client_listener, &client_events, this);
-
 	if ((res = pw_impl_client_register(client, NULL)) < 0)
 		goto cleanup_client;
 
@@ -761,6 +765,44 @@
 	}
 }
 
+static int write_socket_address(struct server *s)
+{
+	long v;
+	int fd, res = 0;
+	char *endptr;
+	const char *env = getenv("PIPEWIRE_NOTIFICATION_FD");
+
+	if (env == NULL || env0 == '\0')
+		return 0;
+
+	errno = 0;
+	v = strtol(env, &endptr, 10);
+	if (endptr0 != '\0')
+		errno = EINVAL;
+	if (errno != 0) {
+		res = -errno;
+		pw_log_error("server %p: strtol() failed with error: %m", s);
+		goto error;
+	}
+	fd = (int)v;
+	if (v != fd) {
+		res = -ERANGE;
+		pw_log_error("server %p: invalid fd %ld: %s", s, v, spa_strerror(res));
+		goto error;
+	}
+	if (dprintf(fd, "%s\n", s->addr.sun_path) < 0) {
+		res = -errno;
+		pw_log_error("server %p: dprintf() failed with error: %m", s);
+		goto error;
+	}
+	close(fd);
+	unsetenv("PIPEWIRE_NOTIFICATION_FD");
+	return 0;
+
+error:
+	return res;
+}
+
 static int add_socket(struct pw_protocol *protocol, struct server *s)
 {
 	socklen_t size;
@@ -815,6 +857,12 @@
 		}
 	}
 
+	res = write_socket_address(s);
+	if (res < 0) {
+		pw_log_error("server %p: failed to write socket address: %s", s,
+				spa_strerror(res));
+		goto error_close;
+	}
 	s->activated = activated;
 	s->loop = pw_context_get_main_loop(protocol->context);
 	if (s->loop == NULL) {
@@ -990,35 +1038,9 @@
 	goto done;
 }
 
-static void on_client_connection_destroy(void *data)
-{
-	struct client *impl = data;
-	spa_hook_remove(&impl->conn_listener);
-}
-
-static void on_client_need_flush(void *data)
-{
-        struct client *impl = data;
-
-	pw_log_trace("need flush");
-	impl->need_flush = true;
-
-	if (impl->source && !(impl->source->mask & SPA_IO_OUT)) {
-		pw_loop_update_io(impl->context->main_loop,
-				impl->source, impl->source->mask | SPA_IO_OUT);
-	}
-}
-
-static const struct pw_protocol_native_connection_events client_conn_events = {
-	PW_VERSION_PROTOCOL_NATIVE_CONNECTION_EVENTS,
-	.destroy = on_client_connection_destroy,
-	.need_flush = on_client_need_flush,
-};
-
 static int impl_connect_fd(struct pw_protocol_client *client, int fd, bool do_close)
 {
 	struct client *impl = SPA_CONTAINER_OF(client, struct client, this);
-	int res;
 
 	impl->connected = false;
 	impl->disconnecting = false;
@@ -1028,23 +1050,10 @@
 					fd,
 					SPA_IO_IN | SPA_IO_OUT | SPA_IO_HUP | SPA_IO_ERR,
 					do_close, on_remote_data, impl);
-	if (impl->source == NULL) {
-		res = -errno;
-		goto error_cleanup;
-	}
+	if (impl->source == NULL)
+		return -errno;
 
-	pw_protocol_native_connection_add_listener(impl->connection,
-						   &impl->conn_listener,
-						   &client_conn_events,
-						   impl);
 	return 0;
-
-error_cleanup:
-	if (impl->connection) {
-		pw_protocol_native_connection_destroy(impl->connection);
-		impl->connection = NULL;
-	}
-	return res;
 }
 
 static void impl_disconnect(struct pw_protocol_client *client)
@@ -1057,9 +1066,7 @@
                 pw_loop_destroy_source(impl->context->main_loop, impl->source);
 	impl->source = NULL;
 
-	if (impl->connection)
-                pw_protocol_native_connection_destroy(impl->connection);
-	impl->connection = NULL;
+	pw_protocol_native_connection_set_fd(impl->connection, -1);
 }
 
 static void impl_destroy(struct pw_protocol_client *client)
@@ -1068,6 +1075,10 @@
 
 	impl_disconnect(client);
 
+	if (impl->connection)
+                pw_protocol_native_connection_destroy(impl->connection);
+	impl->connection = NULL;
+
 	spa_list_remove(&client->link);
 	client_unref(impl);
 }
@@ -1134,6 +1145,31 @@
 	goto done;
 }
 
+static void on_client_connection_destroy(void *data)
+{
+	struct client *impl = data;
+	spa_hook_remove(&impl->conn_listener);
+}
+
+static void on_client_need_flush(void *data)
+{
+        struct client *impl = data;
+
+	pw_log_trace("need flush");
+	impl->need_flush = true;
+
+	if (impl->source && !(impl->source->mask & SPA_IO_OUT)) {
+		pw_loop_update_io(impl->context->main_loop,
+				impl->source, impl->source->mask | SPA_IO_OUT);
+	}
+}
+
+static const struct pw_protocol_native_connection_events client_conn_events = {
+	PW_VERSION_PROTOCOL_NATIVE_CONNECTION_EVENTS,
+	.destroy = on_client_connection_destroy,
+	.need_flush = on_client_need_flush,
+};
+
 static struct pw_protocol_client *
 impl_new_client(struct pw_protocol *protocol,
 		struct pw_core *core,
@@ -1160,6 +1196,10 @@
 		res = -errno;
 		goto error_free;
 	}
+	pw_protocol_native_connection_add_listener(impl->connection,
+						   &impl->conn_listener,
+						   &client_conn_events,
+						   impl);
 
 	if (props) {
 		str = spa_dict_lookup(props, PW_KEY_REMOTE_INTENTION);

pipewire-0.3.56.tar.gz/src/modules/module-protocol-pulse/pulse-server.c -> pipewire-0.3.57.tar.gz/src/modules/module-protocol-pulse/pulse-server.c Changed

pipewire-0.3.56.tar.gz/src/modules/module-protocol-pulse/server.c -> pipewire-0.3.57.tar.gz/src/modules/module-protocol-pulse/server.c Changed

@@ -60,6 +60,7 @@
 #include "server.h"
 #include "stream.h"
 #include "utils.h"
+#include "flatpak-utils.h"
 
 #define LISTEN_BACKLOG 32
 #define MAX_CLIENTS 64
@@ -417,14 +418,47 @@
 		client_access = server->client_access;
 
 	if (server->addr.ss_family == AF_UNIX) {
+		char *app_id = NULL, *devices = NULL;
+
 #ifdef SO_PRIORITY
 		val = 6;
 		if (setsockopt(client_fd, SOL_SOCKET, SO_PRIORITY, &val, sizeof(val)) < 0)
 			pw_log_warn("setsockopt(SO_PRIORITY) failed: %m");
 #endif
 		pid = get_client_pid(client, client_fd);
-		if (pid != 0 && check_flatpak(client, pid) == 1)
+		if (pid != 0 && pw_check_flatpak(pid, &app_id, &devices) == 1) {
+			/*
+			 * XXX: we should really use Portal client access here
+			 *
+			 * However, session managers currently support only camera
+			 * permissions, and the XDG Portal doesn't have a "Sound Manager"
+			 * permission defined. So for now, use access=flatpak, and determine
+			 * extra permissions here.
+			 *
+			 * The application has access to the Pulseaudio socket,
+			 * and with real PA it would always then have full sound access.
+			 * We'll restrict the full access here behind devices=all;
+			 * if the application can access all devices it can then
+			 * also sound and camera devices directly, so granting also the
+			 * Manager permissions here is reasonable.
+			 *
+			 * The "Manager" permission in any case is also currently not safe
+			 * as the session manager does not check any permission store
+			 * for it.
+			 */
 			client_access = "flatpak";
+			pw_properties_set(client->props, "pipewire.access.portal.app_id",
+					app_id);
+
+			if (devices && (spa_streq(devices, "all") ||
+							spa_strstartswith(devices, "all;") ||
+							strstr(devices, ";all;")))
+				pw_properties_set(client->props, PW_KEY_MEDIA_CATEGORY, "Manager");
+			else
+				pw_properties_set(client->props, PW_KEY_MEDIA_CATEGORY, NULL);
+		}
+		free(devices);
+		free(app_id);
 	}
 	else if (server->addr.ss_family == AF_INET || server->addr.ss_family == AF_INET6) {

pipewire-0.3.56.tar.gz/src/modules/module-pulse-tunnel.c -> pipewire-0.3.57.tar.gz/src/modules/module-pulse-tunnel.c Changed

@@ -278,7 +278,7 @@
 	} else {
 		float error, corr;
 
-		error = (float)(impl->current_latency) - (float)impl->target_latency;
+		error = (float)impl->target_latency - (float)impl->current_latency;
 		error = SPA_CLAMP(error, -impl->max_error, impl->max_error);
 
 		corr = spa_dll_update(&impl->dll, error);
@@ -422,33 +422,47 @@
 static void context_state_cb(pa_context *c, void *userdata)
 {
 	struct impl *impl = userdata;
+	bool do_destroy = false;
 	switch (pa_context_get_state(c)) {
-	case PA_CONTEXT_READY:
 	case PA_CONTEXT_TERMINATED:
 	case PA_CONTEXT_FAILED:
+		do_destroy = true;
+		SPA_FALLTHROUGH;
+	case PA_CONTEXT_READY:
 		pa_threaded_mainloop_signal(impl->pa_mainloop, 0);
 		break;
 	case PA_CONTEXT_UNCONNECTED:
+		do_destroy = true;
+		break;
 	case PA_CONTEXT_CONNECTING:
 	case PA_CONTEXT_AUTHORIZING:
 	case PA_CONTEXT_SETTING_NAME:
 		break;
 	}
+	if (do_destroy)
+		pw_impl_module_schedule_destroy(impl->module);
 }
 
 static void stream_state_cb(pa_stream *s, void * userdata)
 {
 	struct impl *impl = userdata;
+	bool do_destroy = false;
 	switch (pa_stream_get_state(s)) {
-	case PA_STREAM_READY:
 	case PA_STREAM_FAILED:
 	case PA_STREAM_TERMINATED:
+		do_destroy = true;
+		SPA_FALLTHROUGH;
+	case PA_STREAM_READY:
 		pa_threaded_mainloop_signal(impl->pa_mainloop, 0);
 		break;
 	case PA_STREAM_UNCONNECTED:
+		do_destroy = true;
+		break;
 	case PA_STREAM_CREATING:
 		break;
 	}
+	if (do_destroy)
+		pw_impl_module_schedule_destroy(impl->module);
 }
 
 static void stream_read_request_cb(pa_stream *s, size_t length, void *userdata)

pipewire-0.3.56.tar.gz/src/modules/module-rt.c -> pipewire-0.3.57.tar.gz/src/modules/module-rt.c Changed

@@ -153,6 +153,11 @@
 #ifdef HAVE_DBUS
 #define RTKIT_SERVICE_NAME "org.freedesktop.RealtimeKit1"
 #define RTKIT_OBJECT_PATH "/org/freedesktop/RealtimeKit1"
+#define RTKIT_INTERFACE "org.freedesktop.RealtimeKit1"
+
+#define XDG_PORTAL_SERVICE_NAME "org.freedesktop.portal.Desktop"
+#define XDG_PORTAL_OBJECT_PATH "/org/freedesktop/portal/desktop"
+#define XDG_PORTAL_INTERFACE "org.freedesktop.portal.Realtime"
 
 /** \cond */
 struct pw_rtkit_bus {
@@ -184,7 +189,11 @@
 
 #ifdef HAVE_DBUS
 	bool use_rtkit;
-	struct pw_rtkit_bus *system_bus;
+	/* For D-Bus. These are const static. */
+	const char* service_name;
+	const char* object_path;
+	const char* interface;
+	struct pw_rtkit_bus *rtkit_bus;
 
 	/* These are only for the RTKit implementation to fill in the `thread`
 	 * struct. Since there's barely any overhead here we'll do this
@@ -215,7 +224,7 @@
 }
 
 #ifdef HAVE_DBUS
-struct pw_rtkit_bus *pw_rtkit_bus_get_system(void)
+struct pw_rtkit_bus *pw_rtkit_bus_get(DBusBusType bus_type)
 {
 	struct pw_rtkit_bus *bus;
 	DBusError error;
@@ -231,7 +240,7 @@
 	if (bus == NULL)
 		return NULL;
 
-	bus->bus = dbus_bus_get_private(DBUS_BUS_SYSTEM, &error);
+	bus->bus = dbus_bus_get_private(bus_type, &error);
 	if (bus->bus == NULL)
 		goto error;
 
@@ -241,12 +250,41 @@
 
 error:
 	free(bus);
-	pw_log_error("Failed to connect to system bus: %s", error.message);
+	pw_log_error("Failed to connect to %s bus: %s",
+		     bus_type == DBUS_BUS_SYSTEM ? "system" : "session", error.message);
 	dbus_error_free(&error);
 	errno = ECONNREFUSED;
 	return NULL;
 }
 
+struct pw_rtkit_bus *pw_rtkit_bus_get_system(void)
+{
+	return pw_rtkit_bus_get(DBUS_BUS_SYSTEM);
+}
+
+struct pw_rtkit_bus *pw_rtkit_bus_get_session(void)
+{
+	return pw_rtkit_bus_get(DBUS_BUS_SESSION);
+}
+
+bool pw_rtkit_check_xdg_portal(struct pw_rtkit_bus *system_bus)
+{
+	DBusError error;
+        bool ret = true;
+
+	dbus_error_init(&error);
+
+	if (!dbus_bus_name_has_owner(system_bus->bus, XDG_PORTAL_SERVICE_NAME, &error)) {
+		pw_log_warn("Can't find xdg-portal: %s", error.name);
+		ret = false;
+		goto finish;
+	}
+finish:
+	dbus_error_free(&error);
+
+	return ret;
+}
+
 void pw_rtkit_bus_free(struct pw_rtkit_bus *system_bus)
 {
 	dbus_connection_close(system_bus->bus);
@@ -270,7 +308,7 @@
 	return -EIO;
 }
 
-static long long rtkit_get_int_property(struct pw_rtkit_bus *connection, const char *propname,
+static long long rtkit_get_int_property(struct impl *impl, const char *propname,
 					long long *propval)
 {
 	DBusMessage *m = NULL, *r = NULL;
@@ -280,19 +318,19 @@
 	DBusError error;
 	int current_type;
 	long long ret;
-	const char *interfacestr = "org.freedesktop.RealtimeKit1";
+	struct pw_rtkit_bus *connection = impl->rtkit_bus;
 
 	dbus_error_init(&error);
 
-	if (!(m = dbus_message_new_method_call(RTKIT_SERVICE_NAME,
-					       RTKIT_OBJECT_PATH,
+	if (!(m = dbus_message_new_method_call(impl->service_name,
+					       impl->object_path,
 					       "org.freedesktop.DBus.Properties", "Get"))) {
 		ret = -ENOMEM;
 		goto finish;
 	}
 
 	if (!dbus_message_append_args(m,
-				      DBUS_TYPE_STRING, &interfacestr,
+				      DBUS_TYPE_STRING, &impl->interface,
 				      DBUS_TYPE_STRING, &propname, DBUS_TYPE_INVALID)) {
 		ret = -ENOMEM;
 		goto finish;
@@ -349,60 +387,63 @@
 	return ret;
 }
 
-int pw_rtkit_get_max_realtime_priority(struct pw_rtkit_bus *connection)
+int pw_rtkit_get_max_realtime_priority(struct impl *impl)
 {
 	long long retval;
 	int err;
 
-	err = rtkit_get_int_property(connection, "MaxRealtimePriority", &retval);
+	err = rtkit_get_int_property(impl, "MaxRealtimePriority", &retval);
 	return err < 0 ? err : retval;
 }
 
-int pw_rtkit_get_min_nice_level(struct pw_rtkit_bus *connection, int *min_nice_level)
+int pw_rtkit_get_min_nice_level(struct impl *impl, int *min_nice_level)
 {
 	long long retval;
 	int err;
 
-	err = rtkit_get_int_property(connection, "MinNiceLevel", &retval);
+	err = rtkit_get_int_property(impl, "MinNiceLevel", &retval);
 	if (err >= 0)
 		*min_nice_level = retval;
 	return err;
 }
 
-long long pw_rtkit_get_rttime_usec_max(struct pw_rtkit_bus *connection)
+long long pw_rtkit_get_rttime_usec_max(struct impl *impl)
 {
 	long long retval;
 	int err;
 
-	err = rtkit_get_int_property(connection, "RTTimeUSecMax", &retval);
+	err = rtkit_get_int_property(impl, "RTTimeUSecMax", &retval);
 	return err < 0 ? err : retval;
 }
 
-int pw_rtkit_make_realtime(struct pw_rtkit_bus *connection, pid_t thread, int priority)
+int pw_rtkit_make_realtime(struct impl *impl, pid_t thread, int priority)
 {
 	DBusMessage *m = NULL, *r = NULL;
+	dbus_uint64_t pid;
 	dbus_uint64_t u64;
 	dbus_uint32_t u32;
 	DBusError error;
 	int ret;
+	struct pw_rtkit_bus *connection = impl->rtkit_bus;
 
 	dbus_error_init(&error);
 
 	if (thread == 0)
 		thread = _gettid();
 
-	if (!(m = dbus_message_new_method_call(RTKIT_SERVICE_NAME,
-					       RTKIT_OBJECT_PATH,
-					       "org.freedesktop.RealtimeKit1",
-					       "MakeThreadRealtime"))) {
+	if (!(m = dbus_message_new_method_call(impl->service_name,
+					       impl->object_path, impl->interface,
+					       "MakeThreadRealtimeWithPID"))) {
 		ret = -ENOMEM;
 		goto finish;
 	}
 
+	pid = (dbus_uint64_t) getpid();
 	u64 = (dbus_uint64_t) thread;
 	u32 = (dbus_uint32_t) priority;
 
 	if (!dbus_message_append_args(m,
+				      DBUS_TYPE_UINT64, &pid,
 				      DBUS_TYPE_UINT64, &u64,
 				      DBUS_TYPE_UINT32, &u32, DBUS_TYPE_INVALID)) {
 		ret = -ENOMEM;
@@ -435,31 +476,34 @@
 	return ret;
 }
 
-int pw_rtkit_make_high_priority(struct pw_rtkit_bus *connection, pid_t thread, int nice_level)
+int pw_rtkit_make_high_priority(struct impl *impl, pid_t thread, int nice_level)
 {
 	DBusMessage *m = NULL, *r = NULL;
+	dbus_uint64_t pid;
 	dbus_uint64_t u64;
 	dbus_int32_t s32;
 	DBusError error;
 	int ret;
+	struct pw_rtkit_bus *connection = impl->rtkit_bus;
 
 	dbus_error_init(&error);
 
 	if (thread == 0)
 		thread = _gettid();
 
-	if (!(m = dbus_message_new_method_call(RTKIT_SERVICE_NAME,
-					       RTKIT_OBJECT_PATH,
-					       "org.freedesktop.RealtimeKit1",
-					       "MakeThreadHighPriority"))) {
+	if (!(m = dbus_message_new_method_call(impl->service_name,
+					       impl->object_path, impl->interface,
+					       "MakeThreadHighPriorityWithPID"))) {
 		ret = -ENOMEM;
 		goto finish;
 	}
 
+	pid = (dbus_uint64_t) getpid();
 	u64 = (dbus_uint64_t) thread;
 	s32 = (dbus_int32_t) nice_level;
 
 	if (!dbus_message_append_args(m,
+				      DBUS_TYPE_UINT64, &pid,
 				      DBUS_TYPE_UINT64, &u64,
 				      DBUS_TYPE_INT32, &s32, DBUS_TYPE_INVALID)) {
 		ret = -ENOMEM;
@@ -502,8 +546,8 @@
 	spa_hook_remove(&impl->module_listener);
 
 #ifdef HAVE_DBUS
-	if (impl->system_bus)
-		pw_rtkit_bus_free(impl->system_bus);
+	if (impl->rtkit_bus)
+		pw_rtkit_bus_free(impl->rtkit_bus);
 #endif
 
 	free(impl);
@@ -560,13 +604,13 @@
 		return -errno;
 }
 
-static int set_nice(struct impl *impl, int nice_level)
+static int set_nice(struct impl *impl, int nice_level, bool warn)
 {
 	int res = 0;
 
 #ifdef HAVE_DBUS
 	if (impl->use_rtkit)
-		res = pw_rtkit_make_high_priority(impl->system_bus, 0, nice_level);
+		res = pw_rtkit_make_high_priority(impl, 0, nice_level);
 	else
 		res = sched_set_nice(nice_level);
 #else
@@ -574,13 +618,13 @@
 #endif
 
 	if (res < 0) {
-		pw_log_warn("could not set nice-level to %d: %s",
-				nice_level, spa_strerror(res));
+		if (warn)
+			pw_log_warn("could not set nice-level to %d: %s",
+					nice_level, spa_strerror(res));
 	} else {
 		pw_log_info("main thread nice level set to %d",
 				nice_level);
 	}
-
 	return res;
 }
 
@@ -596,7 +640,7 @@
 #ifdef HAVE_DBUS
 	if (impl->use_rtkit) {
 		long long rttime;
-		rttime = pw_rtkit_get_rttime_usec_max(impl->system_bus);
+		rttime = pw_rtkit_get_rttime_usec_max(impl);
 		if (rttime >= 0) {
 			if ((rlim_t)rttime < rl.rlim_cur) {
 				pw_log_debug("clamping rt.time.soft from %llu to %lld because of RTKit",
@@ -741,7 +785,7 @@
 		if (min)
 			*min = 1;
 		if (max)
-			*max = pw_rtkit_get_max_realtime_priority(impl->system_bus);
+			*max = pw_rtkit_get_max_realtime_priority(impl);
 	} else {
 		if (min)
 			*min = sched_get_priority_min(REALTIME_POLICY);
@@ -782,7 +826,7 @@
 
 	if (impl->use_rtkit) {
 		pid = impl_gettid(impl, pt);
-		rtprio_limit = pw_rtkit_get_max_realtime_priority(impl->system_bus);
+		rtprio_limit = pw_rtkit_get_max_realtime_priority(impl);
 		if (rtprio_limit >= 0 && rtprio_limit < priority) {
 			pw_log_info("dropping requested priority %d for thread %d down to %d because of RTKit limits", priority, pid, rtprio_limit);
 			priority = rtprio_limit;
@@ -795,7 +839,7 @@
 			pw_log_debug("SCHED_OTHER|SCHED_RESET_ON_FORK worked.");
 		}
 
-		if ((err = pw_rtkit_make_realtime(impl->system_bus, pid, priority)) < 0) {
+		if ((err = pw_rtkit_make_realtime(impl, pid, priority)) < 0) {
 			pw_log_warn("could not make thread %d realtime using RTKit: %s", pid, spa_strerror(err));
 			return err;
 		}
@@ -863,31 +907,17 @@
 
 
 #ifdef HAVE_DBUS
-static int should_use_rtkit(struct impl *impl, struct pw_context *context, bool *use_rtkit)
+static int check_rtkit(struct impl *impl, struct pw_context *context, bool *can_use_rtkit)
 {
 	const struct pw_properties *context_props;
 	const char *str;
 
-	*use_rtkit = true;
+	*can_use_rtkit = true;
 
 	if ((context_props = pw_context_get_properties(context)) != NULL &&
 	    (str = pw_properties_get(context_props, "support.dbus")) != NULL &&
 	    !pw_properties_parse_bool(str))
-		*use_rtkit = false;
-
-	/* If the user has permissions to use regular realtime scheduling, then
-	 * we'll use that instead of RTKit */
-	if (check_realtime_privileges(impl->rt_prio)) {
-		*use_rtkit = false;
-	} else {
-		if (!(*use_rtkit)) {
-			pw_log_warn("neither regular realtime scheduling nor RTKit are available");
-			return -ENOTSUP;
-		}
-
-		/* TODO: Should this be pw_log_warn or pw_log_debug instead? */
-		pw_log_info("could not use realtime scheduling, falling back to using RTKit instead");
-	}
+		*can_use_rtkit = false;
 
 	return 0;
 }
@@ -921,35 +951,68 @@
 	impl->rt_time_soft = pw_properties_get_int32(props, "rt.time.soft", DEFAULT_RT_TIME_SOFT);
 	impl->rt_time_hard = pw_properties_get_int32(props, "rt.time.hard", DEFAULT_RT_TIME_HARD);
 
+	bool can_use_rtkit = false, use_rtkit = false;
+
 #ifdef HAVE_DBUS
 	spa_list_init(&impl->threads_list);
 	pthread_mutex_init(&impl->lock, NULL);
 	pthread_cond_init(&impl->cond, NULL);
 
-	if ((res = should_use_rtkit(impl, context, &impl->use_rtkit)) < 0) {
+	if ((res = check_rtkit(impl, context, &can_use_rtkit)) < 0)
 		goto error;
+#endif
+	/* If the user has permissions to use regular realtime scheduling, as well as
+	 * the nice level we want, then we'll use that instead of RTKit */
+	if (!check_realtime_privileges(impl->rt_prio)) {
+		if (!can_use_rtkit) {
+			res = -ENOTSUP;
+			pw_log_warn("regular realtime scheduling not available (RTKit fallback disabled)");
+			goto error;
+		}
+		use_rtkit = true;
 	}
 
+	if (IS_VALID_NICE_LEVEL(impl->nice_level)) {
+		if (set_nice(impl, impl->nice_level, !can_use_rtkit) < 0)
+			use_rtkit = can_use_rtkit;
+	}
+	set_rlimit(impl);
+
+#ifdef HAVE_DBUS
+	impl->use_rtkit = use_rtkit;
 	if (impl->use_rtkit) {
-		impl->system_bus = pw_rtkit_bus_get_system();
-		if (impl->system_bus == NULL) {
-			res = -errno;
-			pw_log_warn("could not get system bus: %m");
-			goto error;
+		/* Checking xdg-desktop-portal. It works fine in all situations. */
+		impl->rtkit_bus = pw_rtkit_bus_get_session();
+		if (impl->rtkit_bus != NULL) {
+			if (pw_rtkit_check_xdg_portal(impl->rtkit_bus)) {
+				impl->service_name = XDG_PORTAL_SERVICE_NAME;
+				impl->object_path = XDG_PORTAL_OBJECT_PATH;
+				impl->interface = XDG_PORTAL_INTERFACE;
+			} else {
+				pw_log_warn("found session bus but no portal");
+				pw_rtkit_bus_free(impl->rtkit_bus);
+				impl->rtkit_bus = NULL;
+			}
 		}
-	}
-#else
-	if (!check_realtime_privileges(impl->rt_prio)) {
-		res = -ENOTSUP;
-		pw_log_warn("regular realtime scheduling not available (RTKit fallback disabled)");
-		goto error;
+		/* Failed to get xdg-desktop-portal, try to use rtkit. */
+		if (impl->rtkit_bus == NULL) {
+			impl->rtkit_bus = pw_rtkit_bus_get_system();
+			if (impl->rtkit_bus != NULL) {
+				impl->service_name = RTKIT_SERVICE_NAME;
+				impl->object_path = RTKIT_OBJECT_PATH;
+				impl->interface = RTKIT_INTERFACE;
+			} else {
+				res = -errno;
+				pw_log_warn("could not get system bus: %m");
+				goto error;
+			}
+		}
+		/* Retry set_nice with rtkit */
+		if (IS_VALID_NICE_LEVEL(impl->nice_level))
+			set_nice(impl, impl->nice_level, true);
 	}
 #endif
 
-	if (IS_VALID_NICE_LEVEL(impl->nice_level))
-		set_nice(impl, impl->nice_level);
-	set_rlimit(impl);
-
 	impl->thread_utils.iface = SPA_INTERFACE_INIT(
 			SPA_TYPE_INTERFACE_ThreadUtils,
 			SPA_VERSION_THREAD_UTILS,
@@ -977,8 +1040,8 @@
 
 error:
 #ifdef HAVE_DBUS
-	if (impl->system_bus)
-		pw_rtkit_bus_free(impl->system_bus);
+	if (impl->rtkit_bus)
+		pw_rtkit_bus_free(impl->rtkit_bus);
 #endif
 	free(impl);
 done:

pipewire-0.3.56.tar.gz/src/pipewire/conf.c -> pipewire-0.3.57.tar.gz/src/pipewire/conf.c Changed

@@ -39,8 +39,10 @@
 #include <pwd.h>
 #endif
 #if defined(__FreeBSD__) || defined(__MidnightBSD__)
+#ifndef O_PATH
 #define O_PATH 0
 #endif
+#endif
 
 #include <spa/utils/result.h>
 #include <spa/utils/string.h>
@@ -190,6 +192,9 @@
 		return -ENOENT;
 	}
 
+	if (pw_check_option("no-config", "true"))
+		goto no_config;
+
 	if ((res = get_envconf_path(path, size, prefix, name)) != 0) {
 		if ((*level)++ == 0)
 			return res;
@@ -198,20 +203,18 @@
 
 	if (*level == 0) {
 		(*level)++;
-		if ((res = get_confdata_path(path, size, prefix, name)) != 0)
+		if ((res = get_homeconf_path(path, size, prefix, name)) != 0)
 			return res;
 	}
-	if (pw_check_option("no-config", "true"))
-		return 0;
-
 	if (*level == 1) {
 		(*level)++;
 		if ((res = get_configdir_path(path, size, prefix, name)) != 0)
 			return res;
 	}
 	if (*level == 2) {
+no_config:
 		(*level)++;
-		if ((res = get_homeconf_path(path, size, prefix, name)) != 0)
+		if ((res = get_confdata_path(path, size, prefix, name)) != 0)
 			return res;
 	}
 	return 0;
@@ -405,12 +408,17 @@
 
 	if (fstat(fd, &sbuf) < 0)
 		goto error_close;
-	if ((data = mmap(NULL, sbuf.st_size, PROT_READ, MAP_PRIVATE, fd, 0)) == MAP_FAILED)
-		goto error_close;
-	close(fd);
 
-	count = pw_properties_update_string(conf, data, sbuf.st_size);
-	munmap(data, sbuf.st_size);
+	if (sbuf.st_size > 0) {
+		if ((data = mmap(NULL, sbuf.st_size, PROT_READ, MAP_PRIVATE, fd, 0)) == MAP_FAILED)
+			goto error_close;
+
+		count = pw_properties_update_string(conf, data, sbuf.st_size);
+		munmap(data, sbuf.st_size);
+	} else {
+		count = 0;
+	}
+	close(fd);
 
 	pw_log_info("%p: loaded config '%s' with %d items", conf, path, count);
 
@@ -423,13 +431,33 @@
 	return -errno;
 }
 
+static bool check_override(struct pw_properties *conf, const char *name, int level)
+{
+	const struct spa_dict_item *it;
+
+	spa_dict_for_each(it, &conf->dict) {
+		int lev, idx;
+
+		if (!spa_streq(name, it->value))
+			continue;
+		if (sscanf(it->key, "override.%d.%d.config.name", &lev, &idx) != 2)
+			continue;
+		if (lev < level)
+			return false;
+	}
+	return true;
+}
+
 static void add_override(struct pw_properties *conf, struct pw_properties *override,
-		const char *path, int level, int index)
+		const char *path, const char *name, int level, int index)
 {
 	const struct spa_dict_item *it;
 	char key1024;
+
 	snprintf(key, sizeof(key), "override.%d.%d.config.path", level, index);
 	pw_properties_set(conf, key, path);
+	snprintf(key, sizeof(key), "override.%d.%d.config.name", level, index);
+	pw_properties_set(conf, key, name);
 	spa_dict_for_each(it, &override->dict) {
 		snprintf(key, sizeof(key), "override.%d.%d.%s", level, index, it->key);
 		pw_properties_set(conf, key, it->value);
@@ -488,10 +516,16 @@
 			return -errno;
 
 		for (i = 0; i < n; i++) {
-			snprintf(fname, sizeof(fname), "%s/%s", path, entriesi->d_name);
-			if (conf_load(fname, override) >= 0)
-				add_override(conf, override, fname, level, i);
-			pw_properties_clear(override);
+			const char *name = entriesi->d_name;
+
+			snprintf(fname, sizeof(fname), "%s/%s", path, name);
+			if (check_override(conf, name, level)) {
+				if (conf_load(fname, override) >= 0)
+					add_override(conf, override, fname, name, level, i);
+				pw_properties_clear(override);
+			} else {
+				pw_log_info("skip override %s with lower priority", fname);
+			}
 			free(entriesi);
 		}
 		free(entries);
@@ -891,6 +925,75 @@
 	return 0;
 }
 
+static int try_load_conf(const char *conf_prefix, const char *conf_name,
+			 struct pw_properties *conf)
+{
+	int res;
+
+	if (conf_name == NULL)
+		return -EINVAL;
+	if (spa_streq(conf_name, "null"))
+		return 0;
+	if ((res = pw_conf_load_conf(conf_prefix, conf_name, conf)) < 0) {
+		bool skip_prefix = conf_prefix == NULL || conf_name0 == '/';
+		pw_log_warn("can't load config %s%s%s: %s",
+				skip_prefix ? "" : conf_prefix,
+				skip_prefix ? "" : "/",
+				conf_name, spa_strerror(res));
+	}
+	return res;
+}
+
+SPA_EXPORT
+int pw_conf_load_conf_for_context(struct pw_properties *props, struct pw_properties *conf)
+{
+	const char *conf_prefix, *conf_name;
+	int res;
+
+	conf_prefix = getenv("PIPEWIRE_CONFIG_PREFIX");
+	if (conf_prefix == NULL)
+		conf_prefix = pw_properties_get(props, PW_KEY_CONFIG_PREFIX);
+
+	conf_name = getenv("PIPEWIRE_CONFIG_NAME");
+	if ((res = try_load_conf(conf_prefix, conf_name, conf)) < 0) {
+		conf_name = pw_properties_get(props, PW_KEY_CONFIG_NAME);
+		if ((res = try_load_conf(conf_prefix, conf_name, conf)) < 0) {
+			conf_name = "client.conf";
+			if ((res = try_load_conf(conf_prefix, conf_name, conf)) < 0) {
+				pw_log_error("can't load default config %s: %s",
+					conf_name, spa_strerror(res));
+				return res;
+			}
+		}
+	}
+
+	conf_name = pw_properties_get(props, PW_KEY_CONFIG_OVERRIDE_NAME);
+	if (conf_name != NULL) {
+		struct pw_properties *override;
+		const char *path, *name;
+
+		override = pw_properties_new(NULL, NULL);
+		if (override == NULL) {
+			res = -errno;
+			return res;
+		}
+
+		conf_prefix = pw_properties_get(props, PW_KEY_CONFIG_OVERRIDE_PREFIX);
+		if ((res = try_load_conf(conf_prefix, conf_name, override)) < 0) {
+			pw_log_error("can't load default override config %s: %s",
+				conf_name, spa_strerror(res));
+			pw_properties_free (override);
+			return res;
+		}
+		path = pw_properties_get(override, "config.path");
+		name = pw_properties_get(override, "config.name");
+		add_override(conf, override, path, name, 0, 1);
+		pw_properties_free(override);
+	}
+
+	return res;
+}
+
 SPA_EXPORT
 int pw_context_conf_update_props(struct pw_context *context,
 		const char *section, struct pw_properties *props)

pipewire-0.3.56.tar.gz/src/pipewire/conf.h -> pipewire-0.3.57.tar.gz/src/pipewire/conf.h Changed

pipewire-0.3.56.tar.gz/src/pipewire/context.c -> pipewire-0.3.57.tar.gz/src/pipewire/context.c Changed

@@ -101,26 +101,6 @@
 	pw_properties_set(properties, PW_KEY_CORE_NAME, context->core->info.name);
 }
 
-static int try_load_conf(struct pw_context *this, const char *conf_prefix,
-		const char *conf_name, struct pw_properties *conf)
-{
-	int res;
-
-	if (conf_name == NULL)
-		return -EINVAL;
-	if (spa_streq(conf_name, "null"))
-		return 0;
-	if ((res = pw_conf_load_conf(conf_prefix, conf_name, conf)) < 0) {
-		bool skip_prefix = conf_prefix == NULL || conf_name0 == '/';
-		pw_log_warn("%p: can't load config %s%s%s: %s",
-				this,
-				skip_prefix ? "" : conf_prefix,
-				skip_prefix ? "" : "/",
-				conf_name, spa_strerror(res));
-	}
-	return res;
-}
-
 static int context_set_freewheel(struct pw_context *context, bool freewheel)
 {
 	struct spa_thread *thr;
@@ -211,7 +191,7 @@
 {
 	struct impl *impl;
 	struct pw_context *this;
-	const char *lib, *str, *conf_prefix, *conf_name;
+	const char *lib, *str;
 	void *dbus_iface = NULL;
 	uint32_t n_support;
 	struct pw_properties *pr, *conf;
@@ -270,23 +250,8 @@
 		goto error_free;
 	}
 	this->conf = conf;
-
-	conf_prefix = getenv("PIPEWIRE_CONFIG_PREFIX");
-	if (conf_prefix == NULL)
-		conf_prefix = pw_properties_get(properties, PW_KEY_CONFIG_PREFIX);
-
-	conf_name = getenv("PIPEWIRE_CONFIG_NAME");
-	if (try_load_conf(this, conf_prefix, conf_name, conf) < 0) {
-		conf_name = pw_properties_get(properties, PW_KEY_CONFIG_NAME);
-		if (try_load_conf(this, conf_prefix, conf_name, conf) < 0) {
-			conf_name = "client.conf";
-			if ((res = try_load_conf(this, conf_prefix, conf_name, conf)) < 0) {
-				pw_log_error("%p: can't load config %s: %s",
-					this, conf_name, spa_strerror(res));
-				goto error_free;
-			}
-		}
-	}
+	if ((res = pw_conf_load_conf_for_context (properties, conf)) < 0)
+		goto error_free;
 
 	n_support = pw_get_support(this->support, SPA_N_ELEMENTS(this->support) - 6);
 	cpu = spa_support_find(this->support, n_support, SPA_TYPE_INTERFACE_CPU);
@@ -627,98 +592,6 @@
 	return global;
 }
 
-/** Find a port to link with
- *
- * \param context a context
- * \param other_port a port to find a link with
- * \param id the id of a port or PW_ID_ANY
- * \param props extra properties
- * \param n_format_filters number of filters
- * \param format_filters array of format filters
- * \paramout error an error when something is wrong
- * \return a port that can be used to link to \a otherport or NULL on error
- */
-struct pw_impl_port *pw_context_find_port(struct pw_context *context,
-				  struct pw_impl_port *other_port,
-				  uint32_t id,
-				  struct pw_properties *props,
-				  uint32_t n_format_filters,
-				  struct spa_pod **format_filters,
-				  char **error)
-{
-	struct pw_impl_port *best = NULL;
-	bool have_id;
-	struct pw_impl_node *n;
-
-	have_id = id != PW_ID_ANY;
-
-	pw_log_debug("%p: id:%u", context, id);
-
-	spa_list_for_each(n, &context->node_list, link) {
-		if (n->global == NULL)
-			continue;
-
-		if (other_port->node == n)
-			continue;
-
-		if (!global_can_read(context, n->global))
-			continue;
-
-		pw_log_debug("%p: node id:%d", context, n->global->id);
-
-		if (have_id) {
-			if (n->global->id == id) {
-				pw_log_debug("%p: id:%u matches node %p", context, id, n);
-
-				best =
-				    pw_impl_node_find_port(n,
-						pw_direction_reverse(other_port->direction),
-						PW_ID_ANY);
-				if (best)
-					break;
-			}
-		} else {
-			struct pw_impl_port *p, *pin, *pout;
-			uint8_t buf4096;
-			struct spa_pod_builder b = SPA_POD_BUILDER_INIT(buf, sizeof(buf));
-			struct spa_pod *dummy;
-
-			p = pw_impl_node_find_port(n,
-					pw_direction_reverse(other_port->direction),
-					PW_ID_ANY);
-			if (p == NULL)
-				continue;
-
-			if (p->direction == PW_DIRECTION_OUTPUT) {
-				pin = other_port;
-				pout = p;
-			} else {
-				pin = p;
-				pout = other_port;
-			}
-
-			if (pw_context_find_format(context,
-						pout,
-						pin,
-						props,
-						n_format_filters,
-						format_filters,
-						&dummy,
-						&b,
-						error) < 0) {
-				free(*error);
-				continue;
-			}
-			best = p;
-			break;
-		}
-	}
-	if (best == NULL) {
-		*error = spa_aprintf("No matching Node found");
-	}
-	return best;
-}
-
 SPA_PRINTF_FUNC(7, 8) int pw_context_debug_port_params(struct pw_context *this,
 		struct spa_node *node, enum spa_direction direction,
 		uint32_t port_id, uint32_t id, int err, const char *debug, ...)
@@ -1382,6 +1255,9 @@
 			 * panding change. Apply the change to the position now so
 			 * that we have the right values when we change the node
 			 * states of the driver and followers to RUNNING below */
+			pw_log_debug("%p: apply duration:%"PRIu64" rate:%u/%u", context,
+					n->current_quantum, n->current_rate.num,
+					n->current_rate.denom);
 			n->rt.position->clock.duration = n->current_quantum;
 			n->rt.position->clock.rate = n->current_rate;
 			n->current_pending = false;

pipewire-0.3.56.tar.gz/src/pipewire/data-loop.c -> pipewire-0.3.57.tar.gz/src/pipewire/data-loop.c Changed

pipewire-0.3.56.tar.gz/src/pipewire/impl-link.c -> pipewire-0.3.57.tar.gz/src/pipewire/impl-link.c Changed

pipewire-0.3.56.tar.gz/src/pipewire/impl-node.c -> pipewire-0.3.57.tar.gz/src/pipewire/impl-node.c Changed

@@ -1047,7 +1047,7 @@
 		if (pw_node_activation_state_dec(state, 1)) {
 			a->status = PW_NODE_ACTIVATION_TRIGGERED;
 			a->signal_time = nsec;
-			t->signal(t->data);
+			t->signal_func(t->data);
 		}
 	}
 	return 0;
@@ -1145,7 +1145,7 @@
 				this->name, this->info.id, cmd - 1);
 
 		pw_log_trace_fp("%p: got process", this);
-		this->rt.target.signal(this->rt.target.data);
+		this->rt.target.signal_func(this->rt.target.data);
 	}
 }
 
@@ -1262,9 +1262,9 @@
 	this->rt.activation = this->activation->map->ptr;
 	this->rt.target.activation = this->rt.activation;
 	this->rt.target.node = this;
-	this->rt.target.signal = process_node;
+	this->rt.target.signal_func = process_node;
 	this->rt.target.data = this;
-	this->rt.driver_target.signal = process_node;
+	this->rt.driver_target.signal_func = process_node;
 
 	reset_position(this, &this->rt.activation->position);
 	this->rt.activation->sync_timeout = DEFAULT_SYNC_TIMEOUT;
@@ -1613,7 +1613,7 @@
 						state->pending, state->required);
 				dump_states(node);
 			}
-			node->rt.target.signal(node->rt.target.data);
+			node->rt.target.signal_func(node->rt.target.data);
 		}
 
 		if (node->current_pending) {

pipewire-0.3.56.tar.gz/src/pipewire/impl-port.c -> pipewire-0.3.57.tar.gz/src/pipewire/impl-port.c Changed

@@ -209,6 +209,7 @@
 int pw_impl_port_init_mix(struct pw_impl_port *port, struct pw_impl_port_mix *mix)
 {
 	uint32_t port_id;
+	struct pw_impl_node *node = port->node;
 	int res = 0;
 
 	port_id = pw_map_insert_new(&port->mix_port_map, mix);
@@ -252,6 +253,13 @@
 			port->n_mix, port->port_id, mix->port.port_id,
 			mix->io, spa_strerror(res));
 
+	if (port->n_mix == 1) {
+		pw_log_debug("%p: setting port io", port);
+		spa_node_port_set_io(node->node,
+				     port->direction, port->port_id,
+				     SPA_IO_Buffers,
+				     &port->rt.io, sizeof(port->rt.io));
+	}
 	return res;
 
 error_remove_port:
@@ -266,6 +274,7 @@
 {
 	int res = 0;
 	uint32_t port_id = mix->port.port_id;
+	struct pw_impl_node *node = port->node;
 
 	pw_map_remove(&port->mix_port_map, port_id);
 	spa_list_remove(&mix->link);
@@ -280,6 +289,13 @@
 	pw_log_debug("%p: release mix %d %d.%d", port,
 			port->n_mix, port->port_id, mix->port.port_id);
 
+	if (port->n_mix == 0) {
+		pw_log_debug("%p: clearing port io", port);
+		spa_node_port_set_io(node->node,
+				     port->direction, port->port_id,
+				     SPA_IO_Buffers,
+				     NULL, sizeof(port->rt.io));
+	}
 	return res;
 }
 
@@ -1025,12 +1041,7 @@
 	if (control) {
 		pw_log_debug("%p: setting node control", port);
 	} else {
-		pw_log_debug("%p: setting node io", port);
-		spa_node_port_set_io(node->node,
-				     port->direction, port->port_id,
-				     SPA_IO_Buffers,
-				     &port->rt.io, sizeof(port->rt.io));
-
+		pw_log_debug("%p: setting mixer io", port);
 		spa_node_port_set_io(port->mix,
 			     pw_direction_reverse(port->direction), 0,
 			     SPA_IO_Buffers,

pipewire-0.3.56.tar.gz/src/pipewire/keys.h -> pipewire-0.3.57.tar.gz/src/pipewire/keys.h Changed

@@ -76,6 +76,8 @@
 /* config */
 #define PW_KEY_CONFIG_PREFIX		"config.prefix"		/**< a config prefix directory */
 #define PW_KEY_CONFIG_NAME		"config.name"		/**< a config file name */
+#define PW_KEY_CONFIG_OVERRIDE_PREFIX	"config.override.prefix"	/**< a config override prefix directory */
+#define PW_KEY_CONFIG_OVERRIDE_NAME	"config.override.name"	/**< a config override file name */
 
 /* context */
 #define PW_KEY_CONTEXT_PROFILE_MODULES	"context.profile.modules"	/**< a context profile for modules, deprecated */
@@ -170,7 +172,10 @@
 #define PW_KEY_NODE_FORCE_RATE		"node.force-rate"	/**< force a rate while the node is
 								  *  active */
 
-#define PW_KEY_NODE_DONT_RECONNECT	"node.dont-reconnect"	/**< don't reconnect this node */
+#define PW_KEY_NODE_DONT_RECONNECT	"node.dont-reconnect"	/**< don't reconnect this node. The node is
+								  *  initially linked to node.target or
+								  *  target.object or the default node. If the
+								  *  targets is removed, the node is destroyed */
 #define PW_KEY_NODE_ALWAYS_PROCESS	"node.always-process"	/**< process even when unlinked */
 #define PW_KEY_NODE_WANT_DRIVER		"node.want-driver"	/**< the node wants to be grouped with a driver
 								  *  node in order to schedule the graph. */

pipewire-0.3.56.tar.gz/src/pipewire/mem.c -> pipewire-0.3.57.tar.gz/src/pipewire/mem.c Changed

pipewire-0.3.56.tar.gz/src/pipewire/meson.build -> pipewire-0.3.57.tar.gz/src/pipewire/meson.build Changed

pipewire-0.3.56.tar.gz/src/pipewire/private.h -> pipewire-0.3.57.tar.gz/src/pipewire/private.h Changed

pipewire-0.3.56.tar.gz/src/pipewire/stream.c -> pipewire-0.3.57.tar.gz/src/pipewire/stream.c Changed

@@ -1261,11 +1261,9 @@
 	{
 		struct spa_pod_prop *prop;
 		struct spa_pod_object *obj = (struct spa_pod_object *) param;
-		union {
-			float f;
-			double d;
-			bool b;
-		} value;
+		float value_f;
+		double value_d;
+		bool value_b;
 		float *values;
 		uint32_t i, n_values;
 
@@ -1278,24 +1276,24 @@
 
 			switch (c->container) {
 			case SPA_TYPE_Float:
-				if (spa_pod_get_float(&prop->value, &value.f) < 0)
+				if (spa_pod_get_float(&prop->value, &value_f) < 0)
 					continue;
 				n_values = 1;
-				values = &value.f;
+				values = &value_f;
 				break;
 			case SPA_TYPE_Double:
-				if (spa_pod_get_double(&prop->value, &value.d) < 0)
+				if (spa_pod_get_double(&prop->value, &value_d) < 0)
 					continue;
 				n_values = 1;
-				value.f = value.d;
-				values = &value.f;
+				value_f = value_d;
+				values = &value_f;
 				break;
 			case SPA_TYPE_Bool:
-				if (spa_pod_get_bool(&prop->value, &value.b) < 0)
+				if (spa_pod_get_bool(&prop->value, &value_b) < 0)
 					continue;
-				value.f = value.b ? 1.0f : 0.0f;
+				value_f = value_b ? 1.0f : 0.0f;
 				n_values = 1;
-				values = &value.f;
+				values = &value_f;
 				break;
 			case SPA_TYPE_Array:
 				if ((values = spa_pod_get_array(&prop->value, &n_values)) == NULL ||

pipewire-0.3.56.tar.gz/src/pipewire/utils.c -> pipewire-0.3.57.tar.gz/src/pipewire/utils.c Changed

pipewire-0.3.56.tar.gz/src/pipewire/utils.h -> pipewire-0.3.57.tar.gz/src/pipewire/utils.h Changed

pipewire-0.3.56.tar.gz/src/tools/pw-cat.c -> pipewire-0.3.57.tar.gz/src/tools/pw-cat.c Changed

pipewire-0.3.56.tar.gz/src/tools/pw-cli.c -> pipewire-0.3.57.tar.gz/src/tools/pw-cli.c Changed

@@ -226,7 +226,6 @@
 static bool do_permissions(struct data *data, const char *cmd, char *args, char **error);
 static bool do_get_permissions(struct data *data, const char *cmd, char *args, char **error);
 static bool do_send_command(struct data *data, const char *cmd, char *args, char **error);
-static bool do_dump(struct data *data, const char *cmd, char *args, char **error);
 static bool do_quit(struct data *data, const char *cmd, char *args, char **error);
 
 #define DUMP_NAMES "Core|Module|Device|Node|Port|Factory|Client|Link|Session|Endpoint|EndpointStream"
@@ -251,8 +250,6 @@
 	{ "permissions", "sp", "Set permissions for a client <client-id> <object> <permission>", do_permissions },
 	{ "get-permissions", "gp", "Get permissions of a client <client-id>", do_get_permissions },
 	{ "send-command", "c", "Send a command <object-id>", do_send_command },
-	{ "dump", "D", "Dump objects in ways that are cleaner for humans to understand "
-		 "short|deep|resolve|notype -sdrt all|"DUMP_NAMES"|<id>", do_dump },
 	{ "quit", "q", "Quit", do_quit },
 };
 
@@ -269,7 +266,10 @@
 
 	printf("Available commands:\n");
 	for (i = 0; i < SPA_N_ELEMENTS(command_list); i++) {
-		printf("\t%-20.20s\t%s\n", command_listi.name, command_listi.description);
+		char cmd256;
+		snprintf(cmd, sizeof(cmd), "%s | %s",
+				command_listi.name, command_listi.alias);
+		printf("\t%-20.20s\t%s\n", cmd, command_listi.description);
 	}
 	return true;
 }
@@ -1929,20 +1929,6 @@
 	return true;
 }
 
-static const char *
-pw_interface_short(const char *type)
-{
-	size_t ilen;
-
-	ilen = strlen(PW_TYPE_INFO_INTERFACE_BASE);
-
-	if (!type || strlen(type) <= ilen ||
-	    memcmp(type, PW_TYPE_INFO_INTERFACE_BASE, ilen))
-		return NULL;
-
-	return type + ilen;
-}
-
 static struct global *
 obj_global(struct remote_data *rd, uint32_t id)
 {
@@ -2001,20 +1987,6 @@
 	return NULL;
 }
 
-static struct spa_dict *
-obj_props(struct remote_data *rd, uint32_t id)
-{
-	struct global *global;
-
-	if (!rd)
-		return NULL;
-
-	global = obj_global(rd, id);
-	if (!global)
-		return NULL;
-	return global_props(global);
-}
-
 static const char *
 global_lookup(struct global *global, const char *key)
 {
@@ -2026,16 +1998,6 @@
 	return spa_dict_lookup(dict, key);
 }
 
-static const char *
-obj_lookup(struct remote_data *rd, uint32_t id, const char *key)
-{
-	struct spa_dict *dict;
-
-	dict = obj_props(rd, id);
-	if (!dict)
-		return NULL;
-	return spa_dict_lookup(dict, key);
-}
 
 static int
 children_of(struct remote_data *rd, uint32_t parent_id,
@@ -2135,67 +2097,6 @@
 	return count;
 }
 
-#ifndef BIT
-#define BIT(x) (1U << (x))
-#endif
-
-enum dump_flags {
-	is_default = 0,
-	is_short = BIT(0),
-	is_deep = BIT(1),
-	is_resolve = BIT(2),
-	is_notype = BIT(3)
-};
-
-static const char * const dump_types = {
-	PW_TYPE_INTERFACE_Core,
-	PW_TYPE_INTERFACE_Module,
-	PW_TYPE_INTERFACE_Device,
-	PW_TYPE_INTERFACE_Node,
-	PW_TYPE_INTERFACE_Port,
-	PW_TYPE_INTERFACE_Factory,
-	PW_TYPE_INTERFACE_Client,
-	PW_TYPE_INTERFACE_Link,
-	PW_TYPE_INTERFACE_Session,
-	PW_TYPE_INTERFACE_Endpoint,
-	PW_TYPE_INTERFACE_EndpointStream,
-};
-
-int dump_type_index(const char *type)
-{
-	unsigned int i;
-
-	if (!type)
-		return -1;
-
-	for (i = 0; i < SPA_N_ELEMENTS(dump_types); i++) {
-		if (spa_streq(dump_typesi, type))
-			return (int)i;
-	}
-
-	return -1;
-}
-
-static inline unsigned int dump_type_count(void)
-{
-	return SPA_N_ELEMENTS(dump_types);
-}
-
-static const char *name_to_dump_type(const char *name)
-{
-	unsigned int i;
-
-	if (!name)
-		return NULL;
-
-	for (i = 0; i < SPA_N_ELEMENTS(dump_types); i++) {
-		if (!strcasecmp(name, pw_interface_short(dump_typesi)))
-			return dump_typesi;
-	}
-
-	return NULL;
-}
-
 #define INDENT(_level) \
 	({ \
 		int __level = (_level); \
@@ -2205,817 +2106,6 @@
 		(const char *)_indent; \
 	})
 
-static void
-dump(struct data *data, struct global *global,
-     enum dump_flags flags, int level);
-
-static void
-dump_properties(struct data *data, struct global *global,
-		enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct spa_dict *props;
-	const struct spa_dict_item *item;
-	const char *ind;
-	int id;
-	const char *extra;
-
-	if (!global)
-		return;
-
-	props = global_props(global);
-	if (!props || !props->n_items)
-		return;
-
-	ind = INDENT(level + 2);
-	spa_dict_for_each(item, props) {
-		printf("%s%s = \"%s\"",
-				ind, item->key, item->value);
-
-		extra = NULL;
-		if (spa_streq(global->type, PW_TYPE_INTERFACE_Port) && spa_streq(item->key, PW_KEY_NODE_ID)) {
-			id = atoi(item->value);
-			if (id >= 0)
-				extra = obj_lookup(rd, id, PW_KEY_NODE_NAME);
-		} else if (spa_streq(global->type, PW_TYPE_INTERFACE_Factory) && spa_streq(item->key, PW_KEY_MODULE_ID)) {
-			id = atoi(item->value);
-			if (id >= 0)
-				extra = obj_lookup(rd, id, PW_KEY_MODULE_NAME);
-		} else if (spa_streq(global->type, PW_TYPE_INTERFACE_Device) && spa_streq(item->key, PW_KEY_FACTORY_ID)) {
-			id = atoi(item->value);
-			if (id >= 0)
-				extra = obj_lookup(rd, id, PW_KEY_FACTORY_NAME);
-		} else if (spa_streq(global->type, PW_TYPE_INTERFACE_Device) && spa_streq(item->key, PW_KEY_CLIENT_ID)) {
-			id = atoi(item->value);
-			if (id >= 0)
-				extra = obj_lookup(rd, id, PW_KEY_CLIENT_NAME);
-		}
-
-		if (extra)
-			printf(" (\"%s\")", extra);
-
-		printf("\n");
-	}
-}
-
-static void
-dump_params(struct data *data, struct global *global,
-	    struct spa_param_info *params, uint32_t n_params,
-	    enum dump_flags flags, int level)
-{
-	uint32_t i;
-	const char *ind;
-
-	if (params == NULL || n_params == 0)
-		return;
-
-	ind = INDENT(level + 1);
-	for (i = 0; i < n_params; i++) {
-		const struct spa_type_info *type_info = spa_type_param;
-
-		printf("%s  %d (%s) %c%c\n", ind,
-			paramsi.id,
-			spa_debug_type_find_name(type_info, paramsi.id),
-			paramsi.flags & SPA_PARAM_INFO_READ ? 'r' : '-',
-			paramsi.flags & SPA_PARAM_INFO_WRITE ? 'w' : '-');
-	}
-}
-
-
-static void
-dump_global_common(struct data *data, struct global *global,
-	    enum dump_flags flags, int level)
-{
-	const char *ind;
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sid: %"PRIu32"\n", ind, global->id);
-		printf("%spermissions: "PW_PERMISSION_FORMAT"\n", ind,
-			PW_PERMISSION_ARGS(global->permissions));
-		printf("%stype: %s/%d\n", ind,
-				global->type, global->version);
-	} else {
-		ind = INDENT(level);
-		printf("%s%"PRIu32":", ind, global->id);
-		if (!(flags & is_notype))
-			printf(" %s", pw_interface_short(global->type));
-	}
-}
-
-static bool
-dump_core(struct data *data, struct global *global,
-	  enum dump_flags flags, int level)
-{
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_core_info *info;
-	const char *ind;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%scookie: %u\n", ind, info->cookie);
-		printf("%suser-name: \"%s\"\n", ind, info->user_name);
-		printf("%shost-name: \"%s\"\n", ind, info->host_name);
-		printf("%sversion: \"%s\"\n", ind, info->version);
-		printf("%sname: \"%s\"\n", ind, info->name);
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-	} else {
-		printf(" u=\"%s\" h=\"%s\" v=\"%s\" n=\"%s\"",
-				info->user_name, info->host_name, info->version, info->name);
-		printf("\n");
-	}
-
-	return true;
-}
-
-static bool
-dump_module(struct data *data, struct global *global,
-	    enum dump_flags flags, int level)
-{
-	struct remote_data *rd = global->rd;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_module_info *info;
-	const char *args, *desc;
-	const char *ind;
-	uint32_t *factories = NULL;
-	int i, factory_count;
-	struct global *global_factory;
-
-	if (!pd->info)
-		return false;
-
-	info = pd->info;
-
-	dump_global_common(data, global, flags, level);
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sname: \"%s\"\n", ind, info->name);
-		printf("%sfilename: \"%s\"\n", ind, info->filename);
-		printf("%sargs: \"%s\"\n", ind, info->args);
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-	} else {
-		desc = spa_dict_lookup(info->props, PW_KEY_MODULE_DESCRIPTION);
-		args = info->args && strcmp(info->args, "(null)") ? info->args : NULL;
-		printf(" n=\"%s\" f=\"%s\"" "%s%s%s" "%s%s%s",
-				info->name, info->filename,
-				args ? " a=\"" : "",
-				args ? args : "",
-				args ? "\"" : "",
-				desc ? " d=\"" : "",
-				desc ? desc : "",
-				desc ? "\"" : "");
-		printf("\n");
-	}
-
-	if (!(flags & is_deep))
-		return true;
-
-	factory_count = children_of(rd, global->id, PW_TYPE_INTERFACE_Factory, &factories);
-	if (factory_count >= 0) {
-		ind = INDENT(level + 1);
-		printf("%sfactories:\n", ind);
-		for (i = 0; i < factory_count; i++) {
-			global_factory = obj_global(rd, factoriesi);
-			if (!global_factory)
-				continue;
-			dump(data, global_factory, flags | is_notype, level + 1);
-		}
-		free(factories);
-	}
-
-	return true;
-}
-
-static bool
-dump_device(struct data *data, struct global *global,
-	    enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_device_info *info;
-	const char *media_class, *api, *desc, *name;
-	const char *alsa_path, *alsa_card_id;
-	const char *ind;
-	uint32_t *nodes = NULL;
-	int i, node_count;
-	struct global *global_node;
-
-	if (!pd->info)
-		return false;
-
-	info = pd->info;
-
-	dump_global_common(data, global, flags, level);
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-		printf("%sparams:\n", ind);
-		dump_params(data, global, info->params, info->n_params, flags, level);
-	} else {
-		media_class = spa_dict_lookup(info->props, PW_KEY_MEDIA_CLASS);
-		name = spa_dict_lookup(info->props, PW_KEY_DEVICE_NAME);
-		desc = spa_dict_lookup(info->props, PW_KEY_DEVICE_DESCRIPTION);
-		api = spa_dict_lookup(info->props, PW_KEY_DEVICE_API);
-
-		printf("%s%s%s" "%s%s%s" "%s%s%s" "%s%s%s",
-				media_class ? " c=\"" : "",
-				media_class ? media_class : "",
-				media_class ? "\"" : "",
-				name ? " n=\"" : "",
-				name ? name : "",
-				name ? "\"" : "",
-				desc ? " d=\"" : "",
-				desc ? desc : "",
-				desc ? "\"" : "",
-				api ? " a=\"" : "",
-				api ? api : "",
-				api ? "\"" : "");
-
-		if (media_class && spa_streq(media_class, "Audio/Device") &&
-		    api && spa_streq(api, "alsa:pcm")) {
-
-			alsa_path = spa_dict_lookup(info->props, SPA_KEY_API_ALSA_PATH);
-			alsa_card_id = spa_dict_lookup(info->props, SPA_KEY_API_ALSA_CARD_ID);
-
-			printf("%s%s%s" "%s%s%s",
-					alsa_path ? " p=\"" : "",
-					alsa_path ? alsa_path : "",
-					alsa_path ? "\"" : "",
-					alsa_card_id ? " id=\"" : "",
-					alsa_card_id ? alsa_card_id : "",
-					alsa_card_id ? "\"" : "");
-		}
-
-		printf("\n");
-	}
-
-	if (!(flags & is_deep))
-		return true;
-
-	node_count = children_of(rd, global->id, PW_TYPE_INTERFACE_Node, &nodes);
-	if (node_count >= 0) {
-		ind = INDENT(level + 1);
-		printf("%snodes:\n", ind);
-		for (i = 0; i < node_count; i++) {
-			global_node = obj_global(rd, nodesi);
-			if (!global_node)
-				continue;
-			dump(data, global_node, flags | is_notype, level + 1);
-		}
-		free(nodes);
-	}
-
-	return true;
-}
-
-static bool
-dump_node(struct data *data, struct global *global,
-	  enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_node_info *info;
-	const char *name, *path;
-	const char *ind;
-	uint32_t *ports = NULL;
-	int i, port_count;
-	struct global *global_port;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sinput ports: %u/%u\n", ind, info->n_input_ports, info->max_input_ports);
-		printf("%soutput ports: %u/%u\n", ind, info->n_output_ports, info->max_output_ports);
-		printf("%sstate: \"%s\"", ind, pw_node_state_as_string(info->state));
-		if (info->state == PW_NODE_STATE_ERROR && info->error)
-			printf(" \"%s\"\n", info->error);
-		else
-			printf("\n");
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-		printf("%sparams:\n", ind);
-		dump_params(data, global, info->params, info->n_params, flags, level);
-	} else {
-		name = spa_dict_lookup(info->props, PW_KEY_NODE_NAME);
-		path = spa_dict_lookup(info->props, SPA_KEY_OBJECT_PATH);
-
-		printf(" s=\"%s\"", pw_node_state_as_string(info->state));
-
-		if (info->max_input_ports) {
-			printf(" i=%u/%u", info->n_input_ports, info->max_input_ports);
-		}
-		if (info->max_output_ports) {
-			printf(" o=%u/%u", info->n_output_ports, info->max_output_ports);
-		}
-
-		printf("%s%s%s" "%s%s%s",
-				name ? " n=\"" : "",
-				name ? name : "",
-				name ? "\"" : "",
-				path ? " p=\"" : "",
-				path ? path : "",
-				path ? "\"" : "");
-
-		printf("\n");
-	}
-
-	if (!(flags & is_deep))
-		return true;
-
-	port_count = children_of(rd, global->id, PW_TYPE_INTERFACE_Port, &ports);
-	if (port_count >= 0) {
-		ind = INDENT(level + 1);
-		printf("%sports:\n", ind);
-		for (i = 0; i < port_count; i++) {
-			global_port = obj_global(rd, portsi);
-			if (!global_port)
-				continue;
-			dump(data, global_port, flags | is_notype, level + 1);
-		}
-		free(ports);
-	}
-	return true;
-}
-
-static bool
-dump_port(struct data *data, struct global *global,
-	  enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_port_info *info;
-	const char *ind;
-	const char *name, *format;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sdirection: \"%s\"\n", ind,
-				pw_direction_as_string(info->direction));
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-		printf("%sparams:\n", ind);
-		dump_params(data, global, info->params, info->n_params, flags, level);
-	} else {
-		printf(" d=\"%s\"", pw_direction_as_string(info->direction));
-
-		name = spa_dict_lookup(info->props, PW_KEY_PORT_NAME);
-		format = spa_dict_lookup(info->props, PW_KEY_FORMAT_DSP);
-
-		printf("%s%s%s" "%s%s%s",
-				name ? " n=\"" : "",
-				name ? name : "",
-				name ? "\"" : "",
-				format ? " f=\"" : "",
-				format ? format : "",
-				format ? "\"" : "");
-
-		printf("\n");
-	}
-
-	(void)rd;
-
-	return true;
-}
-
-static bool
-dump_factory(struct data *data, struct global *global,
-	     enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_factory_info *info;
-	const char *ind;
-	const char *module_id, *module_name;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sname: \"%s\"\n", ind, info->name);
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-	} else {
-		printf(" n=\"%s\"", info->name);
-
-		module_id = spa_dict_lookup(info->props, PW_KEY_MODULE_ID);
-		module_name = module_id ? obj_lookup(rd, atoi(module_id), PW_KEY_MODULE_NAME) : NULL;
-
-		printf("%s%s%s",
-				module_name ? " m=\"" : "",
-				module_name ? module_name : "",
-				module_name ? "\"" : "");
-
-		printf("\n");
-	}
-
-	return true;
-}
-
-static bool
-dump_client(struct data *data, struct global *global,
-	    enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_client_info *info;
-	const char *ind;
-	const char *app_name, *app_pid;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-	} else {
-		app_name = spa_dict_lookup(info->props, PW_KEY_APP_NAME);
-		app_pid = spa_dict_lookup(info->props, PW_KEY_APP_PROCESS_ID);
-
-		printf("%s%s%s" "%s%s%s",
-				app_name ? " ap=\"" : "",
-				app_name ? app_name : "",
-				app_name ? "\"" : "",
-				app_pid ? " ai=\"" : "",
-				app_pid ? app_pid : "",
-				app_pid ? "\"" : "");
-
-		printf("\n");
-	}
-
-	(void)rd;
-
-	return true;
-}
-
-static bool
-dump_link(struct data *data, struct global *global,
-	  enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_link_info *info;
-	const char *ind;
-	const char *in_node_name, *in_port_name;
-	const char *out_node_name, *out_port_name;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%soutput-node-id: %u\n", ind, info->output_node_id);
-		printf("%soutput-port-id: %u\n", ind, info->output_port_id);
-		printf("%sinput-node-id: %u\n", ind, info->input_node_id);
-		printf("%sinput-port-id: %u\n", ind, info->input_port_id);
-
-		printf("%sstate: \"%s\"", ind,
-				pw_link_state_as_string(info->state));
-		if (info->state == PW_LINK_STATE_ERROR && info->error)
-			printf(" \"%s\"\n", info->error);
-		else
-			printf("\n");
-		printf("%sformat:\n", ind);
-		if (info->format)
-			spa_debug_pod(8 * (level + 1) + 2, NULL, info->format);
-		else
-			printf("%s\tnone\n", ind);
-
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-	} else {
-		out_node_name = obj_lookup(rd, info->output_node_id, PW_KEY_NODE_NAME);
-		in_node_name = obj_lookup(rd, info->input_node_id, PW_KEY_NODE_NAME);
-		out_port_name = obj_lookup(rd, info->output_port_id, PW_KEY_PORT_NAME);
-		in_port_name = obj_lookup(rd, info->input_port_id, PW_KEY_PORT_NAME);
-
-		printf(" s=\"%s\"", pw_link_state_as_string(info->state));
-
-		if (out_node_name && out_port_name)
-			printf(" on=\"%s\"" " op=\"%s\"",
-					out_node_name, out_port_name);
-		if (in_node_name && in_port_name)
-			printf(" in=\"%s\"" " ip=\"%s\"",
-					in_node_name, in_port_name);
-
-		printf("\n");
-	}
-
-	(void)rd;
-
-	return true;
-}
-
-static bool
-dump_session(struct data *data, struct global *global,
-	     enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_session_info *info;
-	const char *ind;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-		printf("%sparams:\n", ind);
-		dump_params(data, global, info->params, info->n_params, flags, level);
-	} else {
-		printf("\n");
-	}
-
-	(void)rd;
-
-	return true;
-}
-
-static bool
-dump_endpoint(struct data *data, struct global *global,
-	      enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_endpoint_info *info;
-	const char *ind;
-	const char *direction;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-
-	switch(info->direction) {
-	case PW_DIRECTION_OUTPUT:
-		direction = "source";
-		break;
-	case PW_DIRECTION_INPUT:
-		direction = "sink";
-		break;
-	default:
-		direction = "invalid";
-		break;
-	}
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sname: %s\n", ind, info->name);
-		printf("%smedia-class: %s\n", ind, info->media_class);
-		printf("%sdirection: %s\n", ind, direction);
-		printf("%sflags: 0x%x\n", ind, info->flags);
-		printf("%sstreams: %u\n", ind, info->n_streams);
-		printf("%ssession: %u\n", ind, info->session_id);
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-		printf("%sparams:\n", ind);
-		dump_params(data, global, info->params, info->n_params, flags, level);
-	} else {
-		printf(" n=\"%s\" c=\"%s\" d=\"%s\" s=%u si=%"PRIu32"",
-				info->name, info->media_class, direction,
-				info->n_streams, info->session_id);
-		printf("\n");
-	}
-
-	(void)rd;
-
-	return true;
-}
-
-static bool
-dump_endpoint_stream(struct data *data, struct global *global,
-		     enum dump_flags flags, int level)
-{
-	struct remote_data *rd = data->current;
-	struct proxy_data *pd = pw_proxy_get_user_data(global->proxy);
-	struct pw_endpoint_stream_info *info;
-	const char *ind;
-
-	if (!pd->info)
-		return false;
-
-	dump_global_common(data, global, flags, level);
-
-	info = pd->info;
-
-	if (!(flags & is_short)) {
-		ind = INDENT(level + 1);
-		printf("%sid: %u\n", ind, info->id);
-		printf("%sendpoint-id: %u\n", ind, info->endpoint_id);
-		printf("%sname: %s\n", ind, info->name);
-		printf("%sproperties:\n", ind);
-		dump_properties(data, global, flags, level);
-		printf("%sparams:\n", ind);
-		dump_params(data, global, info->params, info->n_params, flags, level);
-	} else {
-		printf(" n=\"%s\" i=%"PRIu32" ei=%"PRIu32"",
-				info->name, info->id, info->endpoint_id);
-		printf("\n");
-	}
-
-	(void)rd;
-
-	return true;
-}
-
-static void
-dump(struct data *data, struct global *global,
-     enum dump_flags flags, int level)
-{
-	if (!global)
-		return;
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Core))
-		dump_core(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Module))
-		dump_module(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Device))
-		dump_device(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Node))
-		dump_node(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Port))
-		dump_port(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Factory))
-		dump_factory(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Client))
-		dump_client(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Link))
-		dump_link(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Session))
-		dump_session(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_Endpoint))
-		dump_endpoint(data, global, flags, level);
-
-	if (spa_streq(global->type, PW_TYPE_INTERFACE_EndpointStream))
-		dump_endpoint_stream(data, global, flags, level);
-}
-
-static bool do_dump(struct data *data, const char *cmd, char *args, char **error)
-{
-	struct remote_data *rd = data->current;
-	union pw_map_item *item;
-	struct global *global;
-	char *aa32, **a;
-	char c;
-	int i, n, idx;
-	enum dump_flags flags = is_default;
-	bool match;
-	unsigned int type_mask;
-
-	n = pw_split_ip(args, WHITESPACE, SPA_N_ELEMENTS(aa), aa);
-	if (n < 0)
-		goto usage;
-
-	a = aa;
-	while (n > 0 &&
-		(spa_streq(a0, "short") ||
-		 spa_streq(a0, "deep") ||
-		 spa_streq(a0, "resolve") ||
-		 spa_streq(a0, "notype"))) {
-		if (spa_streq(a0, "short"))
-			flags |= is_short;
-		else if (spa_streq(a0, "deep"))
-			flags |= is_deep;
-		else if (spa_streq(a0, "resolve"))
-			flags |= is_resolve;
-		else if (spa_streq(a0, "notype"))
-			flags |= is_notype;
-		n--;
-		a++;
-	}
-
-	while (n > 0 && a00 == '-') {
-		for (i = 1; (c = a0i) != '\0'; i++) {
-			if (c == 's')
-				flags |= is_short;
-			else if (c == 'd')
-				flags |= is_deep;
-			else if (c == 'r')
-				flags |= is_resolve;
-			else if (c == 't')
-				flags |= is_notype;
-			else
-				goto usage;
-		}
-		n--;
-		a++;
-	}
-
-	if (n == 0 || spa_streq(a0, "all")) {
-		type_mask = (1U << dump_type_count()) - 1;
-		flags &= ~is_notype;
-	} else {
-		type_mask = 0;
-		for (i = 0; i < n; i++) {
-			/* skip direct IDs */
-			if (isdigit(ai0))
-				continue;
-			idx = dump_type_index(name_to_dump_type(ai));
-			if (idx < 0)
-				goto usage;
-			type_mask |= 1U << idx;
-		}
-
-		/* single bit set? disable type */
-		if ((type_mask & (type_mask - 1)) == 0)
-			flags |= is_notype;
-	}
-
-	pw_array_for_each(item, &rd->globals.items) {
-		if (pw_map_item_is_free(item) || item->data == NULL)
-			continue;
-
-		global = item->data;
-
-		/* unknown type, ignore completely */
-		idx = dump_type_index(global->type);
-		if (idx < 0)
-			continue;
-
-		match = false;
-
-		/* first check direct ids */
-		for (i = 0; i < n; i++) {
-			/* skip non direct IDs */
-			if (!isdigit(ai0))
-				continue;
-			if (atoi(ai) == (int)global->id) {
-				match = true;
-				break;
-			}
-		}
-
-		/* if type match */
-		if (!match && (type_mask & (1U << idx)))
-			match = true;
-
-		if (!match)
-			continue;
-
-		dump(data, global, flags, 0);
-	}
-
-	return true;
-usage:
-	*error = spa_aprintf("%s short|deep|resolve|notype -sdrt all|%s|<id>",
-			cmd, DUMP_NAMES);
-	return false;
-}
-
 static bool parse(struct data *data, char *buf, char **error)
 {
 	char *a2;

pipewire-0.3.56.tar.gz/test/test-spa-utils.c -> pipewire-0.3.57.tar.gz/test/test-spa-utils.c Changed

Build Results
RPM Lint

Refresh

Comments for request 5604 1

zaitor wrote about 2 years ago

No checkin yet - wait for factory/TW to publish first

Request History

zaitor created request about 2 years ago

Versionbump

zaitor accepted request about 2 years ago

Xin