Packman Build Service PMBS

We truncated the diff of some files because they were too big. If you want to see the full diff for every file, click here.

Changes of Revision 9

ffhevc.changes Changed

@@ -1,4 +1,25 @@
 -------------------------------------------------------------------
+Sun Nov 06 09:52:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.4
+  * Bugfix: resampling wasn't working for fdk-aac due to missing
+    value in the case statement
+  * Check if output file exists and if so, move it to $file.old
+  * Use test directly instead of an if condition to set the audio
+    filters
+  * Support bitrate calculations for target file size when doing
+    audio copy
+  * Use fdk* in the case statements for easier typing
+  * Renamed variable astrm to astream for clarity
+  * Use [1-2]p in the case statements for passmodes instead of 1p|2p
+  * New function, video_field_parity_func(), to detect and report the
+    interlace field order. Used by motion-compensation deinterlacing
+    and interlaced encoding
+  * Detect and display audio sample rate in case resampling is chosen
+  * Improvements to the video_fps_func() function. Get the FPS value
+    directly instead of outputting to a file and reading it
+
+-------------------------------------------------------------------
 Sat Nov 05 10:56:00 UTC 2016 - neutrino8@opensuse.org
 
 - Update to version 2.9.3

ffhevc.spec Changed

ffhevc-2.9.3.tar.gz/AUTHORS -> ffhevc-2.9.4.tar.gz/AUTHORS Changed

ffhevc-2.9.3.tar.gz/ChangeLog -> ffhevc-2.9.4.tar.gz/ChangeLog Changed

@@ -1,3 +1,21 @@
+2016-11-06 - ffhevc 2.9.4
+	* Bugfix: resampling wasn't working for fdk-aac due to missing
+	  value in the case statement
+	* Check if output file exists and if so, move it to $file.old
+	* Use test directly instead of an if condition to set the audio
+	  filters
+	* Support bitrate calculations for target file size when doing
+	  audio copy
+	* Use fdk* in the case statements for easier typing
+	* Renamed variable astrm to astream for clarity
+	* Use [1-2]p in the case statements for passmodes instead of 1p|2p
+	* New function, video_field_parity_func(), to detect and report the
+	  interlace field order. Used by motion-compensation deinterlacing
+	  and interlaced encoding
+	* Detect and display audio sample rate in case resampling is chosen
+	* Improvements to the video_fps_func() function. Get the FPS value
+	  directly instead of outputting to a file and reading it
+	  
 2016-11-05 - ffhevc 2.9.3
 	* Use a single var, $ofps, to set the output FPS for both deinterlace
 	  bobbing and FPS conversion

ffhevc-2.9.3.tar.gz/ffhevc -> ffhevc-2.9.4.tar.gz/ffhevc Changed

@@ -1,16 +1,16 @@
 #!/usr/bin/env bash
 #
 # Small script to encode to H.265/HEVC video using FFmpeg and libx265.
-# Author: Grozdan "microchip" Nikolov <neutrino8@gmail.com>
-# Version: 2.9.3
-# Date: 2016-11-05
+# Author: Grozdan "microchip" Nikolov <neutrino8@opensuse.org>
+# Version: 2.9.4
+# Date: 2016-11-06
 # License: GNU GPLv2+
 
 green() { echo -e "\e[1;32m$1\e[0;39;49m"; }
 brown() { echo -e "\e[0;33m$1\e[0;39;49m"; }
 error() { echo -e "\e[1;31m$1\e[0;39;49m"; }
 
-version="2.9.3"
+version="2.9.4"
 
 CFG="$HOME/.ffhevc"
 cfgversion="28"
@@ -126,7 +126,7 @@
 		;;
 		m)
 		case "$OPTARG" in
-			1p|2p|crf) true ;;
+			[1-2]p|crf) true ;;
 			*)
 			error "-> Invalid mode!"
 			error "-> Use: $(basename $0) -h"
@@ -362,6 +362,8 @@
 	
 	OUTPUT="$OUTPUT.$CON"
 	
+	test -e "$OUTPUT" && mv -f "$OUTPUT" "$OUTPUT.old"
+	
 	METATITLE="-metadata title=\"$(basename "${OUTPUT%.*}")\" -metadata:s:v:0 title=\"$(basename "${OUTPUT%.*}")\""
 fi
 
@@ -401,7 +403,7 @@
 fi
 
 case "$mode" in
-	1p|2p)
+	[1-2]p)
 	printf "Specify the desired Video Bitrate in kbps [default is 5000]: "
 	read vbtr
 	test -z "$vbtr" && vbitrate="5000" || vbitrate="$vbtr"
@@ -510,8 +512,32 @@
 
 # Used by mc deinterlace and FPS conversion
 video_fps_func() {
-	FPSOUT="$(dirname "$OUTPUT")/.ff_fps$$" 
-	$FFPROBE -i "$input" -select_streams v:0 -show_entries stream=r_frame_rate > "$FPSOUT" 2>&1
+	GETFPS="$($FFPROBE -i "$input" -select_streams v:0 -show_entries stream=r_frame_rate 2>&1 | sed -n 's|^r_frame_rate=||p')"
+}
+
+# Used by mc deinterlace and interlace-aware encoding
+video_field_parity_func() {
+	echo
+	green "-> Detecting Field Parity..."
+	FPAR="$($FFPROBE -i "$input" -show_streams -select_streams v:0 -show_frames -read_intervals %+7 2>&1 | sed -n 's|^field_order=||p' | tail -1)"
+	case "$FPAR" in
+		t*|T*)	fp="tff"; fparity="Top Field First (TFF)" ;;
+		b*|B*)	fp="bff"; fparity="Bottom Field First (BFF)" ;;
+		p*|P*)	fp="progressive"; fparity="Progressive" ;;
+		""|*)	fp="???"; fparity="???" ;;
+	esac
+	green "-> Detected $fparity Parity"
+	if [ "$fp" = "progressive" ]; then
+		error "-> Your file appears to be progressive but"
+		error "   this may be a misdetection!"
+	elif [ "$fp" = "???" ]; then
+		error "-> Could not detect the Field Parity!"
+	fi
+	echo
+	case "$fp" in
+		bff)	defpar="bff" ;;
+		*)	defpar="tff" ;;
+	esac
 }
 
 if [ "$VID_DEINTERLACE" = "y" ]; then
@@ -519,16 +545,10 @@
 		printf "Use Motion-Compensation Deinterlacing? [y/N]: "
 		read mcd
 		if [ "$mcd" = "y" -o "$mcd" = "Y" ]; then
-			printf "Specify the Field Parity of the Input File [tff/bff - default is tff]: "
+			video_field_parity_func
+			printf "Specify the Field Parity of the Input File [tff/bff - default is $defpar]: "
 			read par
-			case "$par" in
-				t*|T*|"")	fpar="tff" ;;
-				b*|B*)		fpar="bff" ;;
-				*)
-				error "-> Invalid option!"
-				exit 1
-				;;
-			esac
+			test -z "$par" && fpar="$defpar" || fpar="$par"
 		fi
 		case "$1" in
 			ofps)	test ! -z "$fpar" && deinterlace="yadif=1,mcdeint=mode=medium:parity=$fpar:qp=10,framestep=step=2," || deinterlace="yadif=0," ;;
@@ -550,16 +570,22 @@
 		case "$dmethod" in
 			0|"") video_deinterlace_func ofps ;;
 			1)
-			video_fps_func
-			FPS1="$(cat "$FPSOUT" | sed -n 's|r_frame_rate=||p' | awk -F/ '{print $1}')"
-			FPS2="$(cat "$FPSOUT" | sed -n 's|r_frame_rate=||p' | awk -F/ '{print $2}')"
-			OFPS="$(($FPS1*2))/$FPS2"
-			rm -f "$FPSOUT"
-			echo
-			green "-> Detected $FPS1/$FPS2 FPS"
-			green "-> Setting output FPS to: $OFPS"
 			echo
-			ofps="-r $OFPS"
+			green "-> Detecting FPS value..."
+			sleep 1
+			video_fps_func
+			if [ ! -z "$GETFPS" ]; then
+				FPS1="$(echo "$GETFPS" | awk -F/ '{print $1}')"
+				FPS2="$(echo "$GETFPS"| awk -F/ '{print $2}')"
+				OFPS="$(($FPS1*2))/$FPS2"
+				green "-> Detected: $FPS1/$FPS2 FPS"
+				green "-> Setting output FPS to: $OFPS"
+				echo
+				ofps="-r $OFPS"
+			else
+				error "-> Could not detect the FPS value!"
+				echo
+			fi
 			video_deinterlace_func bob
 			bob="1"
 			;;
@@ -604,16 +630,10 @@
 	printf "Enable Interlace-aware encoding? [y/N]: "
 	read intaw
 	if [ "$intaw" = "y" -o "$intaw" = "Y" ]; then
-		printf "Specify the Field Parity of the Input File [tff/bff - default is tff]: "
+		video_field_parity_func
+		printf "Specify the Field Parity of the Input File [tff/bff - default is $defpar]: "
 		read parity
-		case "$parity" in
-			t*|T*|"")	interlaced=":interlace=tff" ;;
-			b*|B*)		interlaced=":interlace=bff" ;;
-			*)
-			error "-> Invalid option!"
-			exit 1
-			;;
-		esac
+		test -z "$parity" && interlaced=":interlaced=$defpar" || interlaced=":interlaced=$parity"
 		X265PARAMS="$X265PARAMS$interlaced"
 	fi
 fi
@@ -621,7 +641,7 @@
 if [ "$AUTOCROP" = "y" ]; then
 	echo
 	green "-> Detecting crop values..."
-	VDUR="$($FFPROBE -i "$input" -select_streams v:0 -show_format 2>&1 | sed -n 's|duration=||p' | awk -F. '{print $1}')"
+	VDUR="$($FFPROBE -i "$input" -select_streams v:0 -show_format 2>&1 | sed -n 's|^duration=||p' | awk -F. '{print $1}')"
 	CROPVAL="$($FFMPEG -ss $(($VDUR/2)) -i "$input" -map 0:0 -vf cropdetect=24:4 -frames:v 1000 -f null - 2>&1 | awk '/crop/ {print $NF}' | awk -F= '{print $2}' | tail -1)"
 	if [ ! -z "$CROPVAL" ]; then
 		green "-> Found crop values: $CROPVAL"
@@ -729,12 +749,14 @@
 			green "-> Detecting FPS value..."
 			sleep 1
 			video_fps_func
-			FPS="$(cat "$FPSOUT" | sed -n 's|r_frame_rate=||p')"
-			rm -f "$FPSOUT"
-			green "-> Detected: $FPS FPS"
-			case "$FPS" in
+			if [ ! -z "$GETFPS" ]; then
+				green "-> Detected: $GETFPS FPS"
+			else
+				error "-> Could not detect the FPS value!"
+			fi
+			case "$GETFPS" in
 				24/1|25/1|24000/1001|30000/1001) true ;;
-				*)
+				""|*)
 				echo
 				error "-> Detected FPS is not supported yet!"
 				error "-> Supported FPS are: 24/1, 25/1, 24000/1001 and 30000/1001"
@@ -948,11 +970,11 @@
 		defaudtrk="press 'Enter' to skip"
 	fi
 	printf "Track $i: Specify the Audio Track to Encode or Copy [$defaudtrk]: "
-	read astrm[i]
-	if [ -z "${astrm[1]}" -a "$ATRKS" != "0" ]; then
-		astrm[1]="0:1"
+	read astream[i]
+	if [ -z "${astream[1]}" -a "$ATRKS" != "0" ]; then
+		astream[1]="0:1"
 	fi
-	if [ ! -z "${astrm[i]}" ]; then
+	if [ ! -z "${astream[i]}" ]; then
 		printf "Track $i: Specify the 3-letter Language Code for Metadata [press 'Enter' to skip]: "
 		read alang[i]
 		if [ ! -z "${alang[i]}" ]; then