Packman Build Service PMBS

ffhevc.changes Changed

@@ -1,4 +1,25 @@
 -------------------------------------------------------------------
+Sun Nov 20 14:02:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 3.0.4
+  * Moved checks for supported containers into its own function,
+    check_container_func()
+  * Improvements to gathering information about the input file.
+    Saves us piping to sed and in some cases piping to awk and tail
+  * Removed the NOSOUND option since the user can specify 0 for
+    amount of audio tracks which equals to encoding with the NOSOUND
+    option
+  * Placed both subcopy and subcpy variables into a single subparams
+    variable. This also removes the NOSUBS variable
+  * Placed the video length detection code into its own function,
+    video_length_func(), as it is used in two places so we can
+    save writing the same stuff twice
+  * Instead of skipping bitrate calc for target file size in case
+    we can't detect the video length, ask the user to provide it
+  * Removed install script and added a Makefile for installation
+  * Added new INSTALL file with install/uninstall instructions
+
+-------------------------------------------------------------------
 Fri Nov 18 01:35:00 UTC 2016 - neutrino8@opensuse.org
 
 - Update to version 3.0.3

ffhevc.spec Changed

ffhevc-3.0.3.tar.gz/install Deleted

@@ -1,75 +0,0 @@
-#!/usr/bin/env bash
-#
-# installation script for ffhevc
-#
-
-PREFIX=/usr/local
-
-# Check for root
-if [ $PREFIX = "/usr/local" ] && [ $UID != 0 ]; then
-	echo "-> Login as root to install!"
-	exit 1
-fi
-
-BINDIR=$PREFIX/bin
-DOCDIR=$PREFIX/share/doc/ffhevc
-MANDIR=$PREFIX/man/man1
-
-# Remove previously installed doc dir
-test -d $DOCDIR && rm -rf $DOCDIR
-
-# make dirs if needed
-for i in $BINDIR $DOCDIR $MANDIR; do
-	if [ ! -d $i ]; then
-		mkdir -p -m 755 $i 2>/dev/null
-		if [ $? != 0 ]; then
-			echo "-> Failed to make directories... exiting!"
-			exit 1
-		fi
-	fi
-done
-
-# Copy ffhevc script & doc/man files
-cp -f $(pwd)/ffhevc $BINDIR && chmod 755 $BINDIR/ffhevc
-cp -f $(pwd)/ffhevc.1 $MANDIR && gzip -9 $MANDIR/ffhevc.1 && chmod 644 $MANDIR/ffhevc.1.gz
-for i in AUTHORS ChangeLog LICENSE README preset.txt; do
-	cp -f $(pwd)/$i $DOCDIR
-done
-chmod 644 $DOCDIR/*
-
-# Create uninstall script in $DOCDIR
-cat<<EOF>>$DOCDIR/uninstall
-#!/usr/bin/env bash
-
-if [ \$UID != 0 ]; then
-	echo "-> Login as root to uninstall!"
-	exit 1
-fi
-
-rm -f $BINDIR/ffhevc
-rm -f $MANDIR/ffhevc.1.gz
-rm -rf $DOCDIR
-echo ""
-echo "-> Done"
-echo "-> Thanks for using ffhevc!"
-echo ""
-
-exit 0
-EOF
-
-echo
-echo "-> Installation successful"
-echo
-echo "-> Script is installed in $BINDIR"
-echo "-> Doc files are installed in $DOCDIR"
-echo "-> Man page is installed in $MANDIR"
-echo
-if [ -f $DOCDIR/uninstall ]; then
-	chmod 755 $DOCDIR/uninstall
-	echo "If you want to uninstall the program and all of its files"
-	echo "afterwards, go to the doc directory in $DOCDIR"
-	echo "and run as root the 'uninstall' script"
-fi
-echo
-
-exit 0

ffhevc-3.0.3.tar.gz/ChangeLog -> ffhevc-3.0.4.tar.gz/ChangeLog Changed

@@ -1,3 +1,21 @@
+2016-11-20 - ffhevc 3.0.4
+	* Moved checks for supported containers into its own function,
+	  check_container_func()
+	* Improvements to gathering information about the input file.
+	  Saves us piping to sed and in some cases piping to awk and tail
+	* Removed the NOSOUND option since the user can specify 0 for
+	  amount of audio tracks which equals to encoding with the NOSOUND
+	  option
+	* Placed both subcopy and subcpy variables into a single subparams
+	  variable. This also removes the NOSUBS variable
+	* Placed the video length detection code into its own function,
+	  video_length_func(), as it is used in two places so we can
+	  save writing the same stuff twice
+	* Instead of skipping bitrate calc for target file size in case
+	  we can't detect the video length, ask the user to provide it
+	* Removed install script and added a Makefile for installation
+	* Added new INSTALL file with install/uninstall instructions
+	  
 2016-11-18 - ffhevc 3.0.3
 	* Use process number instead of .old when renaming existing files
 	* Added support for detelecining (IVTC). Bumps up config file

ffhevc-3.0.4.tar.gz/INSTALL Added

ffhevc-3.0.4.tar.gz/Makefile Added

ffhevc-3.0.3.tar.gz/README -> ffhevc-3.0.4.tar.gz/README Changed

ffhevc-3.0.3.tar.gz/ffhevc -> ffhevc-3.0.4.tar.gz/ffhevc Changed

@@ -2,8 +2,8 @@
 #
 # Small script to encode to H.265/HEVC video using FFmpeg and libx265.
 # Author: Grozdan "microchip" Nikolov <neutrino8@opensuse.org>
-# Version: 3.0.3
-# Date: 2016-11-18
+# Version: 3.0.4
+# Date: 2016-11-20
 #
 # ffhevc is free software ; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -24,7 +24,7 @@
 brown() { echo -e "\e[0;33m$1\e[0;39;49m"; }
 error() { echo -e "\e[1;31m$1\e[0;39;49m"; }
 
-version="3.0.3"
+version="3.0.4"
 
 CFG="$HOME/.ffhevc"
 cfgversion="33"
@@ -376,6 +376,27 @@
 	fi
 fi
 
+# Called twice. Here, to check what is set in
+# the config file, and when setting the
+# container format at runtime
+check_container_func() {
+	CONFMT="$(echo "$CONFMT" | tr '[:upper:]' '[:lower:]')"
+	if [ ! -z "$CONFMT" ]; then
+		case "$CONFMT" in
+			mp4|mov)		movflags="-movflags +faststart" ;;
+			mkv|m2ts|mts|ts)	true ;;
+			*)
+			error "-> HEVC video not supported by the chosen container!"
+			error "-> Supported containers are: mkv, mp4, mov, m2ts, mts and ts"
+			error "-> Check your config file, if needed, in '$CFG'"
+			exit 1
+			;;
+		esac
+	fi
+}
+
+check_container_func
+
 if [ ! -z "$batchmode" ]; then
 	error "-> Note: batch mode is in effect!"
 	error "-> Be careful which settings you use as they will"
@@ -441,7 +462,7 @@
 	test -z "$confmt" && CONFMT="mkv" || CONFMT="$confmt"
 fi
 
-CONFMT="$(echo "$CONFMT" | tr '[:upper:]' '[:lower:]')"
+check_container_func
 
 OUTPUT="$OUTPUT.$CONFMT"
 
@@ -477,17 +498,6 @@
 
 METATITLE="-metadata title=\"$(basename "${OUTPUT%.*}")\" -metadata:s:v:0 title=\"$(basename "${OUTPUT%.*}")\""
 
-case "$CONFMT" in
-	mp4|mov)		movflags="-movflags +faststart" ;;
-	mkv|m2ts|mts|ts) 	true ;;
-	*)
-	error "-> HEVC video not supported by the chosen container!"
-	error "-> Supported containers are: mkv, mp4, mov, m2ts, mts and ts"
-	error "-> Check your config file, if needed, in '$CFG'"
-	exit 1
-	;;
-esac
-
 printf "Output to Additional Container Formats? [y/N]: "
 read acf
 if [ "$acf" = "y" -o "$acf" = "Y" ]; then
@@ -682,7 +692,7 @@
 
 # Used by mc/bobbing deinterlace and FPS conversion
 video_fps_func() {
-	GETFPS="$($FFPROBE -i "$input" -select_streams v:0 -show_entries stream=r_frame_rate 2>&1 | sed -n 's|^r_frame_rate=||p')"
+	GETFPS="$($FFPROBE -i "$input" -v error -select_streams v:0 -show_entries stream=r_frame_rate -of default=noprint_wrappers=1:nokey=1 2>&1)"
 }
 
 # Used by mc/bobbing deinterlace, IVTC and interlace-aware encoding
@@ -690,7 +700,7 @@
 	echo
 	green "-> Detecting Field Parity..."
 	sleep 1
-	FPAR="$($FFPROBE -i "$input" -show_streams -select_streams v:0 -show_frames -read_intervals %+10 2>&1 | sed -n 's|^field_order=||p' | tail -1)"
+	FPAR="$($FFPROBE -i "$input" -v error -select_streams v:0 -show_entries stream=field_order -of default=noprint_wrappers=1:nokey=1 2>&1)"
 	case "$FPAR" in
 		t*|T*)	fp="tff"; fparity="Top Field First (TFF)" ;;
 		b*|B*)	fp="bff"; fparity="Bottom Field First (BFF)" ;;
@@ -828,11 +838,22 @@
 	fi
 fi
 
+# Used by cropping and bitrate
+# calc for target file size
+video_length_func() {
+	VLENGTH="$($FFPROBE -i "$input" -v error -select_streams v:0 -show_entries format=duration -of default=noprint_wrappers=1:nokey=1 2>&1 | awk -F. '{print $1}')"
+}
+
 if [ "$AUTOCROP" = "y" ]; then
 	echo
 	green "-> Detecting crop values..."
-	VDUR="$($FFPROBE -i "$input" -select_streams v:0 -show_format 2>&1 | sed -n 's|^duration=||p' | awk -F. '{print $1}')"
-	CROPVAL="$($FFMPEG -ss $(($VDUR/2)) -i "$input" -map 0:0 -vf cropdetect=24:4 -frames:v 1000 -f null - 2>&1 | awk '/crop/ {print $NF}' | awk -F= '{print $2}' | tail -1)"
+	video_length_func
+	if [ -z "$VLENGTH" -o "$VLENGTH" = "N/A" ]; then
+		vlength="300"
+	else
+		$vlength="$VLENGTH"
+	fi
+	CROPVAL="$($FFMPEG -ss $(($vlength/2)) -i "$input" -map 0:0 -vf cropdetect=24:4 -frames:v 1000 -f null - 2>&1 | awk '/crop/ {print $NF}' | awk -F= '{print $2}' | tail -1)"
 	if [ ! -z "$CROPVAL" ]; then
 		green "-> Found crop values: $CROPVAL"
 	else
@@ -1240,9 +1261,10 @@
 		exit 1
 		;;
 	esac
+	subparams="${subcopy[*]} ${subcpy[*]}"
 fi
 
-test -z "${subcopy[*]}" -a -z "${subcpy[*]}" && NOSUBS="-sn"
+test -z "$(echo "$subparams" | sed 's| ||g')" && subparams="-sn"
 
 ################ Audio stuff ################
 
@@ -1264,7 +1286,7 @@
 printf "How many Audio Tracks to Encode or Copy? [0-inf - default is 1]: "
 read atracks
 case "$atracks" in
-	0) 	audparams[1]="-an"; ATRACKS="0" ;;
+	0) 	audparams[1]="-an"; abitrate[1]="0"; ATRACKS="0" ;;
 	[1-9]*)	ATRACKS="$atracks" ;;
 	"")	ATRACKS="1" ;;
 	*)
@@ -1301,7 +1323,6 @@
 		echo " FLAC ----> Channels Support: 8 (codec max)"
 		echo " PCM -----> Channels Support: 8 (ffmpeg max)"
 		echo " COPY ----> Channels Support: depends on audio codec"
-		echo " NOSOUND -> Channels Support: N/A"
 	else
 		echo
 		green "-> Using default audio codec set in config file: $DEFAULT_AUD_CODEC"
@@ -1407,19 +1428,6 @@
 				ofps=
 			fi
 			;;
-			nosound)
-			# nosound takes precedence so
-			# clear any audio options given
-			for t in $(eval echo "{1..$ATRACKS}"); do
-				audparams[t]=
-				auddispo[t]=
-			done
-			echo
-			error "-> NOSOUND chosen. Clearing all other audio options!"
-			audparams[1]="-an"
-			abitrate[1]="0"
-			break
-			;;
 			*)
 			error "-> Unsupported audio codec: ${acodec[i]}"
 			exit 1
@@ -1836,17 +1844,28 @@
 			printf "Specify the Target File Size in MiB [default is 5120]: "
 			read tsize
 			test -z "$tsize" && target="5120" || target="$tsize"
-			VLENGTH="$($FFPROBE -i "$input" -select_streams v:0 -show_format 2>&1 | sed -n 's|^duration=||p' | awk -F. '{print $1}')"
-			if [ -z "$VLENGTH" ]; then
+			video_length_func
+			if [ -z "$VLENGTH" -o "$VLENGTH" = "N/A" ]; then
 				echo
-				error "-> Could not detect video length!"
-				error "-> Skipping bitrate calculation!"
-			else
+				error "-> Could not detect the video length!"
+				echo
+				printf "Specify the Video Length in seconds [no default!]: "
+				read vls
+				if [ -z "$vls" ]; then
+					echo
+					error "-> No value given!"
+					error "-> Skipping bitrate calc!"
+					skipbitcalc="1"
+				else
+					VLENGHT="$vls"
+				fi
+			fi
+			if [ -z "$skipbitcalc" ]; then
 				# Audio copy, get bitrate
 				for i in $(eval echo "{1..$ATRACKS}"); do
 					if [ "${acodec[i]}" = "copy" ]; then
 						aid[i]="$(($(echo "${atrack[i]}" | awk -F: '{print $2}')-1))"
-						abtr[i]="$($FFPROBE -i "$input" -show_streams -select_streams a:${aid[i]} 2>&1 | sed -n 's|^bit_rate=||p')"
+						abtr[i]="$($FFPROBE -i "$input" -v error -select_streams a:${aid[i]} -show_entries stream=bit_rate -of default=noprint_wrappers=1:nokey=1 2>&1)"
 						case "${abtr[i]}" in

Changes of Revision 25