Packman Build Service PMBS

We truncated the diff of some files because they were too big. If you want to see the full diff for every file, click here.

Changes of Revision 21

ffhevc.changes Changed

@@ -1,5 +1,5 @@
 -------------------------------------------------------------------
-Wed Nov 16 09:02:00 UTC 2016 - neutrino8@opensuse.org
+Wed Nov 16 09:18:00 UTC 2016 - neutrino8@opensuse.org
 
 - Update to version 3.0.2
   * Added support for 3-pass encoding
@@ -10,206 +10,8 @@
   * Do some checking on duplicate entries when using additional
     containers and warn and exit
   * Updated the man page
-
--------------------------------------------------------------------
-Mon Nov 14 09:18:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 3.0.1
-  * Set default amount of subtitles to 1 instead of exiting when no
-    value is given
-  * Allow the user to choose the amount of audio tracks he wants at
-    run time instead of requiring it to be set in the config file.
-    This removes config file var MAX_AUD_TRACKS and bumps up version
-    to 31
-  * Renamed array variables audmapval and submapval to audindex and
-    subindex since we're not mapping but specifying the audio/sub
-    index id with these vars
-  * Fixed a possible case where audio params weren't cleared in
-    case the nosound option was chosen
-  * Removed an if conditional checking for MAX_SUBS which no longer
-    is used
-
--------------------------------------------------------------------
-Sun Nov 13 11:36:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 3.0.0
-  * Added support for batch encoding mode, to be activated with the
-    new -b option. It's used to encode directories with video files
-  * Renamed variable $mode to $encmode for clarity
-  * Reworked the input/output code
-  * Disabled strong-intra-smoothing in the default x265 options
-    in the config file
-  * Instead of relying on a config var to set the subtitles amount
-    to support, ask the user each time to provide it. Makes the
-    code less complex and easier to extend in the future. Bumps up
-    config file version to 30
-  * Check if the X265PARAMS var is missing from config in case we're
-    not using an x265 preset
-  * Updated the man page
-
--------------------------------------------------------------------
-Sat Nov 12 10:48:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 2.9.9
-  * Added support for importing external srt/ssa subtitles for the
-    mkv, m2ts, mts and ts containers
-  * Moved the subtitle code into its own video_subtitles_func()
-    function
-  * Added support for simultaneously copying subtitles from the
-    input file and copying external ones
-  * Renamed variable SUBT to SUBNR for clarity
-  * Updated the README file and man page
-
--------------------------------------------------------------------
-Thu Nov 10 21:15:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 2.9.8
-  * Check if name of input file matches that of output file and warn
-    and exit. Requires the realpath utility
-  * Added support for the m2ts, mts and ts containers
-  * Merged the code that checks if an audio codec is supported by a
-    container with that that checks for additional output containers.
-    Removes code duplication and maintainability
-  * Update to the audio sample rates. Sync them with
-    ffmpeg -h encoder=<encoder>
-  * Restrict TrueHD channels to 2, 5 and 6 as that's what the encoder
-    supports
-  * Updated the README file
-
-
--------------------------------------------------------------------
-Wed Nov 09 07:00:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 2.9.7
-  * Renamed config var CON to CONFMT. Updates config file version
-    to 29
-  * Reduced some duplication in the audio codec checks for the
-    container formats
-  * Reduced some error message duplication when checking if an
-    additional container supports an audio codec
-  * Rework to the additional container selection code
-  * Added color functions for the additional container conversion
-  * Added back support for the MOV container
-
--------------------------------------------------------------------
-Tue Nov 08 10:10:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 2.9.6
-  * Added support for encoding to TrueHD audio. Requires a very
-    recent ffmpeg version, preferably latest from git
-  * Some small improvements to the additional container output
-  * Moved the video_deinterlace_func() function inside the actual
-    deinterlace code
-  * Update to the README file
-  * Update to the man page
-
--------------------------------------------------------------------
-Mon Nov 07 16:25:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 2.9.5
-  * Cosmetics in the code for deinterlacing
-  * Instead of skipping FPS conversion if the FPS can't be detected,
-    ask the user to provide it
-  * Use single brackets instead of double ones in the nosound
-    setup code
-  * Added license snippet at the top of the script
-  * Added support for outputting to additional container formats
-  * Do some checking on supported audio codecs for the supported
-    containers
-  * Check specified container and warn and exit if it's not supported
-  * Support setting the FLAC compression level
-  * Break out of the if conditionals in the audio code and replace
-    them with two case statements
-  * Update to the README file
-  
--------------------------------------------------------------------
-Sun Nov 06 09:52:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 2.9.4
-  * Bugfix: resampling wasn't working for fdk-aac due to missing
-    value in the case statement
-  * Check if output file exists and if so, move it to $file.old
-  * Use test directly instead of an if condition to set the audio
-    filters
-  * Support bitrate calculations for target file size when doing
-    audio copy
-  * Use fdk* in the case statements for easier typing
-  * Renamed variable astrm to astream for clarity
-  * Use [1-2]p in the case statements for passmodes instead of 1p|2p
-  * New function, video_field_parity_func(), to detect and report the
-    interlace field order. Used by motion-compensation deinterlacing
-    and interlaced encoding
-  * Detect and display audio sample rate in case resampling is chosen
-  * Improvements to the video_fps_func() function. Get the FPS value
-    directly instead of outputting to a file and reading it
-
--------------------------------------------------------------------
-Sat Nov 05 10:56:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 2.9.3
-  * Use a single var, $ofps, to set the output FPS for both
-    deinterlace bobbing and FPS conversion
-  * Use new $bob var to indicate that we do bobbing and use that
-    var to disable FPS conversion
-  * Renamed $fp var in video_deinterlace_func() to $fpar
-  * Print a warning message that FPS conversion gets disabled if
-    the user chooses audio copy
-  * Added support for the FDK-AAC audio codec. Requires ffmpeg
-    to be compiled with libfdk-aac support
-  * Support FPS conversion with the 'fps' filter
-  * Some minor code optimizations
-
--------------------------------------------------------------------
-Fri Nov 04 10:43:00 UTC 2016 - neutrino8@opensuse.org
-
-- Update to version 2.9.2
-  * Bugfix: the scale variable was used twice for different things
-    causing an overwrite of the scale filter parameters, which
-    eventually results in ffmpeg complaining and exiting
-  * Added support for NTSC <-> NTSC and NTSC <-> PAL frame rate
-    conversions
-  * New var in config file, VID_FPS_CONVERT, to enable/disable
-    FPS conversion. Bumps up config file version to 28
-  * Moved the FPS detection code into its own function so it can
-    be easily reused
-  * Minor cosmetics
-  * Updated the README file
-
--------------------------------------------------------------------
-Thu Nov 03 15:29:00 UTC 2016 - neutrino8@gmail.com
-
-- Update to version 2.9.1
-  * Added support for interlace-aware encoding
-  * Added support for the spp, uspp and pp7 deblockers
-  * Support asking for software scaler during exec time
-  * Added new SCALE var to the config file to enable/disable
-    support for software scaling. Bumps up the config file
-    version to 27
-  * Do a test write to see if output directory is writable by
-    the script executing user
-  * Updated the README file
-
--------------------------------------------------------------------
-Wed Nov 02 19:40:00 UTC 2016 - neutrino8@gmail.com
-
-- Update to version 2.9.0
-  * Added support for motion compensation deinterlacing for both
-    deinterlacing at original FPS and bobbing
-  * Use denoise var instead of denoiser for the denoise filters
-    and rotate var instead of transpose for the transpose filter
-  * Added support for deblocking with the fspp filter. This bumps
-    up the config file version to 26