Packman Build Service PMBS

ffhevc.changes Changed

ffhevc.spec Changed

ffhevc-2.9.5.tar.gz/ChangeLog -> ffhevc-2.9.6.tar.gz/ChangeLog Changed

ffhevc-2.9.5.tar.gz/README -> ffhevc-2.9.6.tar.gz/README Changed

ffhevc-2.9.5.tar.gz/ffhevc -> ffhevc-2.9.6.tar.gz/ffhevc Changed

@@ -2,8 +2,8 @@
 #
 # Small script to encode to H.265/HEVC video using FFmpeg and libx265.
 # Author: Grozdan "microchip" Nikolov <neutrino8@opensuse.org>
-# Version: 2.9.5
-# Date: 2016-11-07
+# Version: 2.9.6
+# Date: 2016-11-08
 #
 # ffhevc is free software ; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -23,7 +23,7 @@
 brown() { echo -e "\e[0;33m$1\e[0;39;49m"; }
 error() { echo -e "\e[1;31m$1\e[0;39;49m"; }
 
-version="2.9.5"
+version="2.9.6"
 
 CFG="$HOME/.ffhevc"
 cfgversion="28"
@@ -567,12 +567,12 @@
 	fi
 fi
 
-# Used by mc deinterlace and FPS conversion
+# Used by mc/bobbing deinterlace and FPS conversion
 video_fps_func() {
 	GETFPS="$($FFPROBE -i "$input" -select_streams v:0 -show_entries stream=r_frame_rate 2>&1 | sed -n 's|^r_frame_rate=||p')"
 }
 
-# Used by mc deinterlace and interlace-aware encoding
+# Used by mc/bobbing deinterlace and interlace-aware encoding
 video_field_parity_func() {
 	echo
 	green "-> Detecting Field Parity..."
@@ -598,24 +598,23 @@
 }
 
 if [ "$VID_DEINTERLACE" = "y" ]; then
-	video_deinterlace_func() {
-		printf "Use Motion-Compensation Deinterlacing? [y/N]: "
-		read mcd
-		if [ "$mcd" = "y" -o "$mcd" = "Y" ]; then
-			video_field_parity_func
-			printf "Specify the Field Parity of the Input File [tff/bff - default is $defpar]: "
-			read par
-			test -z "$par" && fpar="$defpar" || fpar="$par"
-		fi
-		case "$1" in
-			ofps)	test ! -z "$fpar" && deinterlace="yadif=1,mcdeint=mode=medium:parity=$fpar:qp=10,framestep=step=2," || deinterlace="yadif=0," ;;
-			bob)	test ! -z "$fpar" && deinterlace="yadif=1,mcdeint=mode=medium:parity=$fpar:qp=10," || deinterlace="yadif=1," ;;
-		esac
-	}
-	
 	printf "Deinterlace the Input File? [y/N]: "
 	read deint
 	if [ "$deint" = "y" -o "$deint" = "Y" ]; then
+		video_deinterlace_func() {
+			printf "Use Motion-Compensation Deinterlacing? [y/N]: "
+			read mcd
+			if [ "$mcd" = "y" -o "$mcd" = "Y" ]; then
+				video_field_parity_func
+				printf "Specify the Field Parity of the Input File [tff/bff - default is $defpar]: "
+				read par
+				test -z "$par" && fpar="$defpar" || fpar="$par"
+			fi
+			case "$1" in
+				ofps)	test ! -z "$fpar" && deinterlace="yadif=1,mcdeint=mode=medium:parity=$fpar:qp=10,framestep=step=2," || deinterlace="yadif=0," ;;
+				bob)	test ! -z "$fpar" && deinterlace="yadif=1,mcdeint=mode=medium:parity=$fpar:qp=10," || deinterlace="yadif=1," ;;
+			esac
+		}
 		echo
 		brown " Deinterlace Methods"
 		brown " ~~~~~~~~~~~~~~~~~~~"
@@ -683,7 +682,7 @@
 fi
 
 if [ -z "$deinterlace" ]; then
-	printf "Enable Interlace-aware encoding? [y/N]: "
+	printf "Enable Interlace-aware Encoding? [y/N]: "
 	read intaw
 	if [ "$intaw" = "y" -o "$intaw" = "Y" ]; then
 		video_field_parity_func
@@ -1059,6 +1058,7 @@
 	echo " Opus ----> Channels Support: 8 (ffmpeg max)"
 	echo " Vorbis --> Channels Support: 8 (ffmpeg max)"
 	echo " MP3 -----> Channels Support: 2 (codec max)"
+	echo " TrueHD --> Channels Support: 6 (encoder max)"
 	echo " FLAC ----> Channels Support: 8 (codec max)"
 	echo " PCM -----> Channels Support: 8 (ffmpeg max)"
 	echo " COPY ----> Channels Support: depends on audio codec"
@@ -1092,6 +1092,14 @@
 			abropts[i]="32-6144"
 			abrdef[i]="768"
 			;;
+			truehd)
+			strict="-strict -2"
+			acdc[i]="truehd"
+			ameta[i]="TrueHD"
+			abropts[i]="1000-18000"
+			abrdef[i]="5000"
+			skiptfs="1"
+			;;
 			dts)
 			strict="-strict -2"
 			acdc[i]="dca"
@@ -1178,7 +1186,7 @@
 		case "$CON" in
 			mp4)
 			case "${acodec[i]}" in
-				pcm|opus|flac)
+				pcm|opus|flac|truehd)
 				error "-> $(echo "${acodec[i]}" | tr '[:lower:]' '[:upper:]') is not supported by the MP4 container!"
 				error "-> Check your config file, if needed, in '$CFG'"
 				exit 1
@@ -1226,7 +1234,7 @@
 			esac
 			
 			case "${acodec[i]}" in
-				ac3|eac3|dts|aac|fdk*|mp3|vorbis|opus|"")
+				ac3|eac3|truehd|dts|aac|fdk*|mp3|vorbis|opus|"")
 				printf "Track $i: Specify the Audio Bitrate in kbps [${abropts[i]} - default is ${abrdef[i]}]: "
 				read abr[i]
 				test -z "${abr[i]}" && abitrate[i]="${abrdef[i]}k" || abitrate[i]="${abr[i]}k"
@@ -1236,7 +1244,7 @@
 			esac
 			
 			case "${acodec[i]}" in
-				ac3|eac3|dts|"")		chanrange[i]="1-6"; defchan[i]="6" ;;
+				ac3|eac3|truehd|dts|"")		chanrange[i]="1-6"; defchan[i]="6" ;;
 				aac|opus|vorbis|flac|pcm)	chanrange[i]="1-8"; defchan[i]="8" ;;
 				mp3)				chanrange[i]="1-2"; defchan[i]="2" ;;
 				fdk*)
@@ -1265,13 +1273,14 @@
 				;;
 			esac
 			case "${acodec[i]}" in
-				ac3|eac3|"")
+				ac3|eac3|truehd|"")
 				case "${ach[i]}" in
 					[1-6]) true ;;
 					*)
 					case "${acodec[i]}" in
 						ac3|"")	error "-> AC-3 supports only 1-6 channels!" ;;
 						eac3)	error "-> E-AC-3 encoder in ffmpeg supports only 1-6 channels!" ;;
+						truehd)	error "-> TrueHD encoder in ffmpeg supports only 1-6 channels!" ;;
 					esac
 					exit 1
 					;;
@@ -1424,7 +1433,7 @@
 							;;
 						esac
 						;;
-						vorbis|pcm)
+						vorbis|pcm|truehd)
 						brown " Supported Sample Rates"
 						brown " ~~~~~~~~~~~~~~~~~~~~~~"
 						echo " 0 -> 8000 Hz     5 -> 24000 Hz    10 -> 88200 Hz"
@@ -1480,7 +1489,7 @@
 			mp4)
 			for a in $(eval echo "{1..$MAX_AUD_TRACKS}"); do
 				case "${acodec[a]}" in
-					pcm|opus|flac)
+					pcm|opus|flac|truehd)
 					error "-> Additional container $i does not support ${acodec[a]} audio!"
 					error "-> See: $formats_url"
 					exit 1
@@ -1503,6 +1512,11 @@
 	# Haven't found a reliable way to make it work with
 	# FLAC and PCM audio so just skip this if one of
 	# these audio codecs is chosen. Patch welcome
+	# In case of TrueHD, while we support setting the
+	# bitrate, that codec is variable in nature and
+	# the actual bitrate can wildly fluctuate, which
+	# will result in miscalculation for the target
+	# size by an unknown amount
 	if [ -z "$skiptfs" ]; then
 		echo
 		printf "Set a Target File Size? [y/N]: "
@@ -1619,12 +1633,13 @@
 echo "" >> "$OUTFILE.sh"
 if [ ! -z "$extracon" ]; then
 	for i in $extracon; do
-		echo "$FFMPEG -i \"$OUTPUT\" -map 0 -c copy \"${OUTPUT%.*}.$i\"" >> "$OUTFILE.sh"
-		echo "" >> "$OUTFILE.sh"
+		echo "echo" >> "$OUTFILE.sh"
+		echo "echo -e \"\e[1;32m-> Converting to $i...\e[0;39;49m\"" >> "$OUTFILE.sh"
+		echo "$FFMPEG -i \"$OUTPUT\" -map 0 -c copy \"${OUTPUT%.*}.$i\" >/dev/null 2>&1" >> "$OUTFILE.sh"
+		echo "test \"\$?\" = \"0\" && echo -e \"\e[1;32m-> Done\e[0;39;49m\" || echo -e \"\e[1;31m-> Failed!\e[0;39;49m\"" >> "$OUTFILE.sh"
 	done
+	echo "echo" >> "$OUTFILE.sh"
 fi
 chmod +x "$OUTFILE.sh"
 
 source "$OUTFILE.sh"
-
-exit $?

ffhevc-2.9.5.tar.gz/ffhevc.1 -> ffhevc-2.9.6.tar.gz/ffhevc.1 Changed

Changes of Revision 11