Packman Build Service PMBS

ffhevc.changes Changed

ffhevc.spec Changed

ffhevc-3.3.7.tar.gz/ChangeLog -> ffhevc-3.3.8.tar.gz/ChangeLog Changed

ffhevc-3.3.7.tar.gz/ffhevc -> ffhevc-3.3.8.tar.gz/ffhevc Changed

@@ -2,8 +2,8 @@
 #
 # Small script to encode to H.265/HEVC video using FFmpeg and libx265.
 # Author: Grozdan "microchip" Nikolov <neutrino8@opensuse.org>
-# Version: 3.3.7
-# Date: 2017-06-13
+# Version: 3.3.8
+# Date: 2017-06-14
 #
 # ffhevc is free software ; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -24,10 +24,10 @@
 brown() { echo -e "\e[0;33m$1\e[0;39;49m"; }
 error() { echo -e "\e[1;31m$1\e[0;39;49m"; }
 
-version="3.3.7"
+version="3.3.8"
 
 CFG="$HOME/.ffhevc"
-cfgversion="36"
+cfgversion="37"
 
 genconfig_func() {
 cat<<EOF>>"$CFG"
@@ -83,6 +83,7 @@
 # Video filters
 VID_DENOISE="y"
 VID_DEBLOCK="y"
+VID_SHARPEN="y"
 VID_ROTATE="y"
 VID_DEINTERLACE="y"
 VID_DETELECINE="y"
@@ -707,6 +708,56 @@
 	fi
 }
 
+video_sharpen_func() {
+	printf "Sharpen or Blur the Encode? [y/N]: "
+	read sharp
+	if [ "$sharp" = "y" -o "$sharp" = "Y" ]; then
+		printf "Set the Luma Matrix Horizontal/Vertical sizes [odd num between 3-23 - default is 5:5]: "
+		read lmhv
+		if [ ! -z "$lmhv" ]; then
+			if [ -z "$(echo "$lmhv" | grep ':')" ]; then
+				echo
+				error "-> You have to specify both values! (eg, 5:5)"
+				error "-> Using default of 5:5"
+				echo
+				lx="5"
+				ly="5"
+			else
+				lx="$(echo "$lmhv" | awk -F: '{print $1}')"
+				ly="$(echo "$lmhv" | awk -F: '{print $2}')"
+			fi
+		else
+			lx="5"
+			ly="5"
+		fi
+		printf "Set the Luma Effect Strength [-1.5-1.5 - default is 0.5]: "
+		read les
+		test -z "$les" && la="0.5" || la="$les"
+		printf "Set the Chroma Matrix Horizontal/Vertical sizes [odd num between 3-23 - default is 5:5]: "
+		read cmhv
+		if [ ! -z "$cmhv" ]; then
+			if [ -z "$(echo "$cmhv" | grep ':')" ]; then
+				echo
+				error "-> You have to specify both values! (eg, 5:5)"
+				error "-> Using default of 5:5"
+				echo
+				cx="5"
+				cy="5"
+			else
+				cx="$(echo "$cmhv" | awk -F: '{print $1}')"
+				cy="$(echo "$cmhv" | awk -F: '{print $2}')"
+			fi
+		else
+			cx="5"
+			cy="5"
+		fi
+		printf "Set the Chroma Effect Strength [-1.5-1.5 - default is 0.0]: "
+		read ces
+		test -z "$ces" && ca="0.0" || ca="$ces"
+		unsharp="unsharp=lx=$lx:ly=$ly:la=$la:cx=$cx:cy=$cy:ca=$ca,"
+	fi
+}
+
 # Used by mc/bobbing deinterlace and FPS conversion
 video_fps_func() {
 	GETFPS="$($FFPROBE -i "$input" -v error -select_streams v:0 -show_entries stream=r_frame_rate -of default=noprint_wrappers=1:nokey=1 | tail -1)"
@@ -914,17 +965,17 @@
 		sleep 1
 		video_chars_func
 		echo
-		printf "Specify the Input/Output Color Range [tv|mpeg|pc|jpeg - default is mpeg/tv]: "
+		printf "Specify the Input/Output Color Range [tv|mpeg|pc|jpeg - default is mpeg:tv]: "
 		read crange
 		if [ -z "$crange" ]; then
-			irange="mpeg"
+			irange="tv"
 			orange="tv"
 		else
-			if [ ! -z "$(echo "$crange" | grep '/')" ]; then
-				irange="$(echo "$crange" | awk -F/ '{print $1}')"
-				orange="$(echo "$crange" | awk -F/ '{print $2}')"
+			if [ ! -z "$(echo "$crange" | grep ':')" ]; then
+				irange="$(echo "$crange" | awk -F: '{print $1}')"
+				orange="$(echo "$crange" | awk -F: '{print $2}')"
 			else
-				error "-> Invalid format! Valid is: <input_range>/<output_range> (eg: mpeg/tv)"
+				error "-> Invalid format! Valid is: <input_range>:<output_range> (eg: mpeg:tv)"
 				exit 1
 			fi
 		fi
@@ -1084,6 +1135,7 @@
 if [ "$postproc" = "y" -o "$postproc" = "Y" ]; then
 	test "$VID_DENOISE" = "y" && video_denoise_func
 	test "$VID_DEBLOCK" = "y" && video_deblock_func
+	test "$VID_SHARPEN" = "y" && video_sharpen_func
 	test "$VID_DEINTERLACE" = "y" && video_deinterlace_func
 	test "$VID_DETELECINE" = "y" && video_detelecine_func
 	test "$VID_PIXEL_FORMAT" = "y" && video_pixfmt_func
@@ -1261,64 +1313,68 @@
 				;;
 			esac
 		fi
-		case "$swsopt" in
-			2|9)
-			echo
-			brown "Scaler Tuning"
-			brown "~~~~~~~~~~~~~"
-			echo " 0 -> Default (0.00, 0.60)"
-			echo " 1 -> Catmull-Rom Spline (0.00, 0.50)"
-			echo " 2 -> Mitchell-Netravali Spline (0.33, 0.33)"
-			echo " 3 -> Cubic B-Spline (1.00, 0.00)"
-			echo " 4 -> Custom"
-			echo
-			printf "Specify the Scaler Tuning option [default is 0]: "
-			read swstune
-			case "$swstune" in
-				0|"")	swsparam0=":param0=0.00"; swsparam1=":param1=0.60" ;;
-				1)	swsparam0=":param0=0.00"; swsparam1=":param1=0.50" ;;
-				2)	swsparam0=":param0=0.33"; swsparam1=":param1=0.33" ;;
-				3)	swsparam0=":param0=1.00"; swsparam1=":param1=0.00" ;;
-				4)
-				printf "Specify the Custom Scaler Tuning values [default is 0.00:0.60]: "
-				read swscus
-				if [ ! -z "$swscus" ]; then
-					swsparam0=":param0=$(echo "$swscus" | awk -F: '{print $1}')"
-					swsparam1=":param1=$(echo "$swscus" | awk -F: '{print $2}')"
-				fi
+		printf "Tweak the Software Scaler? [y/N]: "
+		read swstweak
+		if [ "$swstweak" = "y" -o "$swstweak" = "Y" ]; then
+			case "$swsopt" in
+				2|9)
+				echo
+				brown "Scaler Tuning"
+				brown "~~~~~~~~~~~~~"
+				echo " 0 -> Default (0.00, 0.60)"
+				echo " 1 -> Catmull-Rom Spline (0.00, 0.50)"
+				echo " 2 -> Mitchell-Netravali Spline (0.33, 0.33)"
+				echo " 3 -> Cubic B-Spline (1.00, 0.00)"
+				echo " 4 -> Custom"
+				echo
+				printf "Specify the Scaler Tuning option [default is 0]: "
+				read swstune
+				case "$swstune" in
+					0|"")	swsparam0=":param0=0.00"; swsparam1=":param1=0.60" ;;
+					1)	swsparam0=":param0=0.00"; swsparam1=":param1=0.50" ;;
+					2)	swsparam0=":param0=0.33"; swsparam1=":param1=0.33" ;;
+					3)	swsparam0=":param0=1.00"; swsparam1=":param1=0.00" ;;
+					4)
+					printf "Specify the Custom Scaler Tuning values [default is 0.00:0.60]: "
+					read swscus
+					if [ ! -z "$swscus" ]; then
+						swsparam0=":param0=$(echo "$swscus" | awk -F: '{print $1}')"
+						swsparam1=":param1=$(echo "$swscus" | awk -F: '{print $2}')"
+					fi
+					;;
+					*)
+					error "-> Invalid option"
+					exit 1
+					;;
+				esac
 				;;
-				*)
-				error "-> Invalid option"
-				exit 1
+				6|8)
+				if [ "$swsopt" = "6" ]; then
+					swscaler="Gaussian"
+					swsval="0-100"
+					swsdef="0"
+					swstype="Sharpness"
+				else
+					swscaler="Lanczos"
+					swsval="1-10"
+					swsdef="1"
+					swstype="Filter Length"
+				fi
+				printf "Specify the $swscaler scaler $swstype [$swsval - default is $swsdef]: "
+				read swstune
+				test ! -z "$swstune" && swsparam0=":param0=$swstune"
 				;;
 			esac
-			;;
-			6|8)
-			if [ "$swsopt" = "6" ]; then
-				swscaler="Gaussian"
-				swsval="0-100"
-				swsdef="0"
-				swstype="Sharpness"
-			else
-				swscaler="Lanczos"
-				swsval="1-10"
-				swsdef="1"
-				swstype="Filter Length"
+			printf "Enable Accurate Rounding? [y/N]: "
+			read around
+			if [ "$around" = "y" -o "$around" = "Y" ]; then
+				accuround="+accurate_rnd"
+			fi
+			printf "Enable Full Chroma Interpolation? [y/N]: "
+			read fci
+			if [ "$fci" = "y" -o "$fci" = "Y" ]; then
+				fullchroma="+full_chroma_int"
 			fi
-			printf "Specify the $swscaler scaler $swstype [$swsval - default is $swsdef]: "
-			read swstune
-			test ! -z "$swstune" && swsparam0=":param0=$swstune"
-			;;
-		esac
-		printf "Enable Accurate Rounding? [y/N]: "
-		read around
-		if [ "$around" = "y" -o "$around" = "Y" ]; then
-			accuround="+accurate_rnd"
-		fi
-		printf "Enable Full Chroma Interpolation? [y/N]: "
-		read fci
-		if [ "$fci" = "y" -o "$fci" = "Y" ]; then
-			fullchroma="+full_chroma_int"
 		fi
 		test ! -z "$interlaced" && interl=":interl=1"
 		scale="scale=$res$interl:flags=$scaler$accuround$fullchroma$swsparam0$swsparam1,"
@@ -1339,7 +1395,7 @@
 		echo " 0 -> BT470M (NTSC)"
 		echo " 1 -> SMPTE170M (NTSC)"
 		echo " 2 -> BT470BG (PAL)"
-		echo " 3 -> BT709 (HD/Full HD)"
+		echo " 3 -> BT709 (HD/FHD)"
 		echo " 4 -> BT2020NC & BT2020-10 (4K/UHD)"
 		echo " 5 -> BT2020NC & BT2020-12 (4K/UHD)"
 		echo " 6 -> BT2020C & BT2020-10 (4K/UHD)"
@@ -2802,7 +2858,7 @@
 
 test "$CHAPS" = "n" && CHPS="-map_chapters -1"
 
-vidfilters="$(echo "$deinterlace$detelecine$pixformat$colorspace$crop$deblock$denoise$scale$rotate$setpts$fps$framestep" | sed 's|,$||')"
+vidfilters="$(echo "$deinterlace$detelecine$pixformat$colorspace$crop$deblock$denoise$scale$unsharp$rotate$setpts$fps$framestep" | sed 's|,$||')"
 
 test ! -z "$vidfilters" && vfilters="-vf $vidfilters"

Changes of Revision 64